ATI Technologies RADEON 8500 User Manual page 28

7500 to a TV or a VCR, use a Composite (RCA)
cable. If your TV has cable input only, you can
connect your card to your TV through your VCR or
an RF modulator (available in most electronics
stores).
Connecting Your Video Out to a TV or VCR
Turn off your PC and your TV (or VCR).
1
2 Ensure your card was installed correctly as per
the Getting Started Guide.
Determine if your TV (or VCR) has an S-Video
3
or Composite video connection.
Looking at the back of your PC, locate your
4
S-Video Out or Composite Out. Using an
appropriate cable, attach one end of the cable to
your video out and the other to your TV (or
VCR). Refer to the illustration for further help.
Turn on your PC and your TV (or VCR).
5
TV or VCR
NOTE: Newer TVs may have
the Video Input on the front
panel
RADEON 8500
S-Video Out
S-Video In
OR
Composite In
S-Video Cable
Composite Cable
Composite Out
OR
RADEON 7500
PC
24