Advertisement
Express Card Slot
1. Slide the MD800 into the slot (SIM card side
down, LED side up).
2. The LED should light up when connection is
established.
USB
1. Slide the MD800 into the USB adaptor
casing (USB adaptor label & MD800 LED
side up).
2. Insert the small USB plugs into the adaptor
casing. Insert the USB plugs into the
computer.
3. The LED should light up when connection is
established, though it may be obscured.
Starting ExpressCard
1. Select Start
All Programs
GSmart ExpressCard.
2. When the screen opens. If requested, enter
your PIN and press Apply.
Creating a connection
1. From the main screen, select Profile.
2. There are two ways for you to use, select
Mode or Edit Mode.
3. In Select Mode, you have to choose country
4. In Edit Mode, enter the necessary
Home Screen
1. GSmart Logo
2. Signal Strength
3. Radio Technology
4. SIM card
5. Minimize
6. Close
7. Menu Screen
8. Back to Menu
9. Radio On/Off
10. Connect/Disconnect
Menu Screen
SMS: Text message folders such as Inbox,
Contacts: SIM Card contact lists.
GSmart
Profile: Connection profile setup and edit.
Setting: General, SMS, SIM, Radio.
Status: Some information about internet
Statistics: Upload, download graphs.
Information: Device, Version specifics.
2
----------------------
MD800
and carrier name, then press Apply.
information and press Apply.
Outbox, Draft, etc.
connection.
Advertisement
