Advertisement
Quick Links
FITTING THE RACK EARS
Step 7:
Secure the rack ears using the screws and
•
nuts provided:
6 x AB0188 NUT M4 NYLOCK
•
6 x AB5680 SCREW M4X10 PAN POZI BK
•
Rack Ears fitted.
•
Step 8:
Carefully re-assemble your console, following steps 1-5 in reverse.
•
Step 9:
Attach the assembly to a rack using suitable rack screws and washers.
•
XONE:43 Rack Ear Fitting Guide AP9941 Issue 2
Copyright © 2018 Allen & Heath Limited. All rights reserved
http://www.allen-heath.com
RACK EAR FITTING GUIDE
Kit Part No: X:43-RK19
Publication AP9941_2
Advertisement
Related Manuals for ALLEN & HEATH Xone:43
Summary of Contents for ALLEN & HEATH Xone:43
- Page 1 Attach the assembly to a rack using suitable rack screws and washers. • RACK EAR FITTING GUIDE Kit Part No: X:43-RK19 XONE:43 Rack Ear Fitting Guide AP9941 Issue 2 Copyright © 2018 Allen & Heath Limited. All rights reserved Publication AP9941_2 http://www.allen-heath.com...
- Page 2 • the connector PCB. A small container to keep screws in. • There is a single wireform on a Xone:43. • Ensure that the power to the unit has been turned off and disconnected completely from the mains. (Xone:43 pictured).
Need help?
Do you have a question about the Xone:43 and is the answer not in the manual?
Questions and answers