Install And Charge Battery; Power Off - Gigabyte GSmart i350 Quick Manual

Quick guide - gsmart i350 multilingual version
Hide thumbs Also See for GSmart i350:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
No SIM card.
Main battery power is full.
Low battery, please
recharge.
Charging.
You have one or more MSN
message(s).
You have one or more email,
message(s), or voicemail
message(s).
Magnifier is running in the
background.
Recorder is recording.
You have new messages in
answer machine.
Headset is plugged in.
You have missed calls.
Tap this icon to reveal all
status icons.
Mobile phone is off (Flight
mode).
Mobile phone is on,
GPRS is available.
GPRS is disconnected.
GPRS is connected
Bluetooth is activated.
GPS Tracking is connecting.
GPS Tracking is connected.
Install and Remove a SIM
Card
1. Before inserting / removing a SIM card,
please make sure that the device is
turned off and is not connected to any
power supply by the USB cable or
charger.
2. Remove the battery from the battery
slot.
3. Insert / Remove the SIM card from the
SIM card slot.
4. Replace the battery back to the battery
slot.

Install and Charge Battery

When using the device for the first time,
please make sure the battery is installed
and fully charged.
1. Insert a battery to the battery slot.
2. Plug your charger into an outlet and
plug the other end to your device. The
device will start charging automatically.
3. It takes 3 hours to fully charge your
battery with a traveler charger for the
first time. On a battery charger, it takes
6-8 hours to fully charge your battery
for the first time. Unplug the device
from the charger when charging is
complete, and you may now use the
device.
4. When the LED light is in red, it means
the battery is charging.
5. When the LED light is in green, it
means the charging is complete.
6. The battery icon on task bar on Today
screen shows the battery status. You
may also check the battery status in
Start > Settings > System Tab > Battery
Tab.
Power On
Press Power On / Off key on the top of the
device to turn on the device.

Power Off

Press and hold Power On / Off Key on the
top of the device for about 5 seconds while
the power is on.
9
----------------------
i350

Advertisement

Table of Contents
loading

Table of Contents