Chapter 9 Multimedia - Gigabyte GSmart i120 User Manual

Watch full screen analog TV on this device and be the first to get the news! Please plug in
the device headset before watching TV in this device. The headset is also an antenna. You
can adjust the headset lines for better signals.
When launching TV for the first time, this device will automatically start searching for
available channels and will set the first channel detected as default channel.
Select "Settings" >【System】>【TV/FM】, Select a country name or a PAL sub-system. If
you don't find the country name for selection you can follow the steps listed below
a) select "NTSC" for NTSC system.
b) select PAL-I, PAL-BG or PAL-DK based on your sub-system.
A good reference link to the world TV standard is http://kropla.com/tv.htm
1.Select " Start " >【Programs】>【Multimedia 】>【TV】
.Tap the screen to open TV menu.
3.If no action is detected within 5 seconds, the TV menu will automatically disappear.
.Tap icon on the top right of screen to turn off TV and exit.
TV Function Bar:
1.Tap to go to the next available channel.
.Tap to go to previous available channel.
3.Tap to see the list of available channels. Tap on a channel to go to that channel.
.Tap to adjust TV screen setup, including [Channel Search], [Save to], [ Brightness
], [ Color ], [ Contrast ], and press " OK " on the top right to confirm disabling options after
completing adjustment.
5.Tap to return to the previous channel you were watching.
6.Tap to switch between loudspeaker or headset mode.
7.Tap to show screen keypad.
8.Tap to show keypad for my favorite channels.
˙ To save the channel you are currently watching to a particular favorite channel, tap the
5