Advertisement
Quick Links
ALDI GUARANTEES THAT OUR EXCLUSIVE BRAND PRODUCTS ARE DEVELOPED
TO OUR STRINGENT QUALITY SPECIFICATIONS. IF YOU ARE NOT ENTIRELY
SATISFIED WITH THIS PRODUCT, PLEASE RETURN IT TO THE NEAREST ALDI
STORE WITHIN 60 DAYS FROM THE DATE OF PURCHASE, FOR A FULL REFUND
OR REPLACEMENT, OR TAKE ADVANTAGE OF OUR AFTER SALES SUPPORT BY
CALLING THE SUPPLIER'S CUSTOMER SERVICE HOTLINE.
AU
Made in China
FERREX© is a registered trademark of ALDI Stores
DISTRIBUTED BY:
ALDI STORES
1 Sargents Road
Minchinbury NSW 2770
www.aldi.com.au
After Sales Support
5
(
1300 855 831
835399
AU
: support@scheppach.com.au
Model:
YEAR WARRANTY
F-DES12
07/2024
Translation of the original operating
instructions
CORDLESS SANDER F-DES12
2024|05|06_01 Translation of the original operating instructions
2
Table of contents
1.
Introduction ..................................................................................................
2.
Product description (Fig. 1-5) .......................................................................
3.
Scope of delivery (Fig. 1) ...............................................................................
4.
Proper use .....................................................................................................
5.
Safety instructions.........................................................................................
6.
Technical data ...............................................................................................
7.
Unpacking .....................................................................................................
8.
Before commissioning...................................................................................
9.
Operation.......................................................................................................
10.
Working instructions .....................................................................................
11.
Cleaning and maintenance ...........................................................................
12.
Storage ..........................................................................................................
13.
Repair & ordering spare parts ......................................................................
14.
Troubleshooting............................................................................................
15.
Warranty Details ............................................................................................
16.
Repair and Refurbished Goods or Parts Notice ............................................
17.
Exploded view...............................................................................................
3
8
8
9
9
10
16
17
18
19
22
23
23
24
25
26
27
28
Advertisement
Related Manuals for FERREX F-DES12
Summary of Contents for FERREX F-DES12
- Page 1 Repair & ordering spare parts ..............Troubleshooting.................... Warranty Details .................... Repair and Refurbished Goods or Parts Notice ..........Made in China Exploded view....................FERREX© is a registered trademark of ALDI Stores DISTRIBUTED BY: ALDI STORES 1 Sargents Road Minchinbury NSW 2770 www.aldi.com.au...
- Page 2 Scope of delivery 1 x Battery 1 x Suction adapter 1 x USB charging cable 1 x Dust bag 3 x Sanding sheet (grain 60/120/240) 1 x Cordless sander 1 x Operating manual 1 x Warranty card...
- Page 3 Explanation of the symbols on the product Explanation of the symbols on the product Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompanying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace proper accident prevention measures.
- Page 4 Introduction 1. Introduction Manufacturer: Scheppach GmbH Günzburger Straße 69 D-89335 Ichenhausen Dear Customer We hope your new product brings you much enjoyment and success. Note: In accordance with the applicable product liability laws, the manufacturer of this product assumes no liability for damage to the product or caused by the product arising from: •...
- Page 5 Scope of delivery (Fig. 1) Battery Charging light Release button (battery) Suction adapter Sanding pad Sanding pad base plate Sanding pad front plate USB charging cable Dust bag Sanding sheet Adapter connection 3. Scope of delivery (Fig. 1) Item Quantity Designation Battery Suction adapter...
- Page 6 Safety instructions The product may only be operated with original parts and original accessories from the manufacturer. The safety, operating and maintenance specifications of the manufacturer, as well as the dimensions specified in the technical data, must be observed. Please note that our products were not designed with the intention of use for com- mercial or industrial purposes.
- Page 7 Safety instructions c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplug- ging the power tool.
- Page 8 Safety instructions 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Page 9 Safety instructions d) Liquid may leak from the battery if used incorrectly. Avoid contact with it. In case of accidental contact, rinse with water. If the liquid gets into your eyes, seek additional medical attention. Leaking battery fluid may cause skin irrita- tion or burns.
- Page 10 Safety instructions 5. Always empty the dust bag before work breaks. Grinding dust in the dust bag, microfilter, paper bag (or in the filter bag or filter of the vacuum cleaner) can self-ignite under unfavourable conditions, such as flying sparks when grinding metals.
- Page 11 Safety instructions WARNING In case of extended working periods, the operating personnel may suffer circulatory disturbances in their hands (vibration white finger) due to vibrations. Raynaud's syndrome is a vascular disease that causes the small blood vessels on the fingers and toes to cramp in spasms. The affect- ed areas are no longer supplied with sufficient blood and therefore appear extremely pale.
- Page 12 Technical data 6. Technical data Engine voltage 12 V Oscillation rate 13,000 rpm Sanding wheel 15x10 mm Weight (without battery) 0.494 kg Battery (Li-Ion) Number of battery cells Rated voltage max. 12 V Capacity 1.3 Ah Power 15.6 Wh Charging process temperature 50°C Charging time 3–4.5 h...
- Page 13 Unpacking The total noise emission values specified and the total vibration emission values specified can also be used for an initial estimation of the load. WARNING The noise emission values and vibration emission value can vary from the specified values during the actual use of the power tool, depending on the type and the manner in which the elec- tric tool is used, and in particular the type of workpiece being processed.
- Page 14 Before commissioning 8. Before commissioning WARNING Danger of injury! Remove the battery from the power tool before carrying out any work on the power tool (e.g. maintenance, tool change, etc.) and when transporting and storing it. There is a risk of injury if the on/off switch is operated unintentionally.
- Page 15 Operation 8.2.2. Taking off the external dust extraction unit 1. Take off the vacuum hose of the approved dust extraction unit (not included in the scope of delivery) from the suction adapter (7). 8.3. Inserting/removing the battery (5) into/from the battery mount (4) (Fig. 3) Inserting the battery 1.
- Page 16 Operation 9.1. Switching the product on/off (Fig. 1) Note: Always switch the product on before making contact with the material and then guide the product to the workpiece. Switching on 1. Push the ON/OFF switch (3) into position I to switch the product on. The on/off switch (3) remains in position.
- Page 17 Operation 9.3. Changing the sanding pad (8) (Fig. 4) The supplied sanding pad (8) consists of two parts: the base plate (8a) and the exchangeable front plate (8b). The front plate (8b) is fitted with a hook and loop tape and can be replaced. 1.
- Page 18 Working instructions • In any case, observe the applicable safety instructions as well as regulations and instructions on environmental protection (see “Disposal and recycling”). 10. Working instructions Note: Negligent use of personal protective equipment (PPE) Careless use or omission of personal protective equipment may result in serious in- jury.
- Page 19 Cleaning and maintenance 11. Cleaning and maintenance WARNING Have maintenance and repair tasks that are not described in this operating manual, carried out by a specialist workshop. Use only original spare parts. There is a risk of accident! Always perform maintenance and cleaning work with the battery removed.
- Page 20 Repair & ordering spare parts Store the product and its accessories in a dark, dry and frost-free place that is inac- cessible to children. The optimum storage temperature is between 5°C and 30˚C. Store the product in its original packaging. Cover the product to protect it from dust or moisture.
- Page 21 Troubleshooting 14. Troubleshooting Fault Possible cause Remedy The sander is not The battery power is too Charge the battery. working. weak. The battery is not Push the battery into the battery properly inserted. mount. The battery clicks into place audibly. The contacts on the prod- Remove any existing dirt.
- Page 22 Warranty Details 15. Warranty Details CORDLESS SANDER Warranty Details REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months (dependant on product) from the date of purchase.
- Page 23 Repair and Refurbished Goods or Parts Notice 16. Repair and Refurbished Goods or Parts Notice CORDLESS SANDER Repair and Refurbished Goods or Parts Notice REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION Unfortunately, from time to time, faulty products are manufactured which need to be returned to the Supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored onamobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost.
- Page 24 Exploded view...
- Page 25 Notes...
- Page 26 Notes...
Need help?
Do you have a question about the F-DES12 and is the answer not in the manual?
Questions and answers