Power Management Setup - JETWAY 917PDCPR106 User Manual

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
ACPI Function
ACPI Suspend Type
Power Management
Video off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Resume by Alarm
X Date (of Month)
X Time (hh:mm:ss)
> PM Timer Reload Events
> PCI Express PM Function
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
ACPI Suspend Type
This item allows you to select ACPI Suspend Type.
The setting are: S1(POS), S3(STR)
Video Off in Suspend
This determines the manner in which the monitor is blanked. The choice are Yes
off , and No Video always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state.
The settings are: Delay 4 Sec, Instant-Off.
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Enabled
S1(POS)
User Define
V/H SYNC+Blank
Yes
Stop Grant
3
Disabled
Disabled
Instant-off
Disabled
Disabled
Disabled
0
0 : 0 :0
Press Enter
Press Enter
F6:Optimized Defaults
Initial display power management signaling.
This option only writes blanks to the video buffer.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Menu Level >
F7:Standard Defaults
38
Item Help
F1:General Help
Video will