Advanced Bios Features - JETWAY 917PDCPR106 User Manual

Time
The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications
of your drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk drive type is not matched or
listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
Access Mode The settings are Auto Normal, Large, and LBA.
number of cylinders
Cylinder
Head number of heads
write precomp
Precomp
Landing Zone landing zone
number of sectors
Sector

3-5 Advanced BIOS Features

Anti-Virus Protection
CPU L1 & L2 Cache
CPU L3 Cache
Limit CPUID MaxVal
NX BIOS Control
Hard Disk Boot Priority
Hyper Threading Technology
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
Report No FDD For Windows
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Disabled
Enabled
Enabled
Disabled
Enabled
Press Enter
Enabled
Enabled
Floppy
HDD 0
CDROM
Enabled
Disabled
Enabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
Yes
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
31
Item Help
F1:General Help