Raid Install Sis 180 Raid Driver And Utility - JETWAY 917PDCP User Manual

4-5 RAID install SIS 180 RAID Driver and Utility

1. Click RAID in MAGIC INSTALL MENU
appear
3. When the license agreement windows appear,
please choose "I accept the terms of the
license agreement" and click NEXT, then
click INSTALL, start install SIS180 RAID
Controller Driver
Making SATA HDD driver diskette before Install WindowsXP/2000
If you only have Serial ATA HDDs on your system, before you install the Windows XP or
Windows 2000, you will need to make a SATA HDD driver diskette before you start to install the
Operating System.
How to make a SATA HDD driver diskette?
STEP 1: Insert the diskette which been formatted in floppy drive on a system which can start OS.
STEP 2: After booting OS insert the bundle CD in your CD-ROM
STEP 3: Copy all the files from \SiS\SiS180\Disk to floppy diskette
Once you have the SATA driver diskette ready, you may start to install Windows XP or Windows
2000 on your System.
Installation of Windows XP/ Windows 2000
For installation of Windows XP or Windows 2000, please insert Windows XP or Windows 2000
CD into the CD-ROM drive. Then remove the floppy diskette, and boot the system. At the very
beginning, you will see the message at the bottom of screen, "Press F6 if you need to install a
third party SCSI or RAID driver...."
At this moment, please press <F6> key and follow the instructions of Windows XP or Windows
2000 for the proper installation.
2. When "RAID application windows appear,
please click NEXT
4. Please click FINISH and restart your
computer
48