Pm Timer Reload Events; Pci Express Pm Function - JETWAY 915GDAPR1A User Manual

Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes
to the operating system, before this function will work

PM Timer Reload Events

Please refer to section 3-8-1

PCI Express PM Function

Please refer to section 3-8-2
3-8-1 PM Timer Reload Events
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D] #
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
3-8-2 PCI Express PM Function
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
PCI Express PME
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
PM Timer Reload Events
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
F6:Optimized Defaults
PCI Express PM Function
Enabled
F6:Optimized Defaults
31
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults