Table of Contents
Advertisement
(9)
Secondary IDE Connector (40-pin block): IDE2
This connector connects to the next set of Master and Slave hard disks. Follow the
same procedure described for the primary IDE connector. You may also configure two
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.
2-6-2 Headers
(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
Pin 1
Primary IDE Connector
Pin 1
Secondary IDE Connector
Pin 1
AUDIO
L-IN-L
G ND
MIC
L-O UT-L
Line-In/Out, MIC Headers
15
L-IN-R
G ND
MICP
G ND
L-O UT-R
Advertisement
Table of Contents
