Table of Contents
Advertisement
(9)
Wake On-LAN/Modem Headers (3-pin) : WOL, WOM
This connector connects to a LAN/Modem card with a WAKE ON-LAN/Modem output.
This connector power up the system when a wake up signal is received through the
LAN/Modem card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(10) FAN Speed Headers (3-pin) : FAN1, FAN2, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan's plug to the board taking into
consideration the polarity of connector.
VC C
NC
Speaker
G ND
Reset SW
G ND
Turbo LED
G ND
System Case Connections
WOM
1
3
Wake-On-Modem Headers
1
CPUFAN
3
1
3
FAN2
1
3
FAN1
18
G ND
NC
Power LED
VC C
G ND
Turbo SW
VC C
WOL
1
3
Wake-On-LAN Headers
Hide quick links:
Advertisement
Table of Contents
