Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NTT docomo Manuals
  4. Cell Phone
  5. PRIME series
  6. Instruction manual

NTT docomo PRIME Series Instruction Manual

'10.5
Hide thumbs Also See for PRIME Series:

Advertisement

Quick Links

Download this manual
'10.5

Advertisement

loading
Need help?

Need help?

Do you have a question about the PRIME Series and is the answer not in the manual?

Questions and answers

Related Manuals for NTT docomo PRIME Series

Summary of Contents for NTT docomo PRIME Series

  • Page 1 ’10.5...

  • Page 2: Basic Package

    DOCOMO Basic package W-CDMA and GSM/GPRS System Thank you for purchasing “docomo PRIME series SH-07B”. Before use of SH-07B, make sure that you read this manual to ensure proper operation. Explanation for operation of Battery Pack SH23 Desktop Holder SH31 SH-07B Other than this manual, “Guide”...

  • Page 3: Basic Operation

    I n t r o d u c t i o n Introduction FOMA Terminal nP.2 What You Can Do with SH-07B nP.3 Part Names and Functions nP.4 Viewer Position nP.6 Precautions nP.7 Handling Precautions nP.15 Waterproofness/Dust-proofness nP.19 Basic Before Use nP.25 Screen Explanation nP.29 Character Entry nP.36 Operation...

  • Page 4: Foma Terminal

    FOMA Terminal Because the FOMA terminal relies on radio signals, it cannot be The user hereby agrees that the user shall be solely responsible for used in places with no signal (such as tunnels, underground, or in the result of the use of SSL/TLS. Neither DOCOMO nor the certifier buildings), in places with a weak signal or outside the FOMA as listed herein makes any representation and warranty as for the security in the use of SSL/TLS.
  • Page 5 What You Can Do with SH-07B AUTO-GPS (in Japanese only) nP.63 International roaming nP.52 By the AUTO-GPS function, you can receive convenient The same FOMA terminal, phone number and mail services, such as providing surrounding information address as those used in Japan are available overseas including weather information, store information, etc., or (supporting 3G and GSM areas).

  • Page 6: Part Names And Functions

    Part Names and Functions Using earphone Connection example for flat-plug earphone/ microphone with switch (sold separately) When you use an earphone which does not support external Connector connector terminal, connect with a plug adapter (sold separately). Flat-plug connector of Flat-plug earphone flat-plug earphone/ terminal microphone with switch...
  • Page 7 1Earpiece o&: Side key 2Brightness sensor Use to shoot still pictures or moving pictures. Sensor detects brightness of the surrounding area. Do not cover Display the sub display or turn Picture Light on/off with the FOMA the sensor area with your hand or a sticker. terminal closed.

  • Page 8: Viewer Position

    Viewer Position You can continue to operate with the touch panel when you switch the FOMA terminal to the viewer position while you use the function in the normal position. Viewer position To use the FOMA terminal, open it (normal position) or use it in the viewer position. Cautions when rotating Rotate the display Flip the display forward.

  • Page 9: Table Of Contents

    Precautions Before use, read these “Precautions” carefully and use your FOMA The following symbols indicate specific directions. terminal properly. Keep this manual in a safe place for future reference. Indicates a prohibited action. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.

  • Page 10: Danger

    Handling the FOMA terminal, Use only the battery packs and If you notice anything unusual, adapters specified by NTT such as an unusual odor, battery pack, adapters, desktop DOCOMO for use with the overheating, discoloration or holder, and UIM (general) FOMA terminal.

  • Page 11: Handling The Foma Terminal

    Keep the FOMA terminal out of Do not point the illuminated Do not shine the light at anyone the reach of young children. light directly at someone’s driving a car or other vehicles. eyes. A young child may swallow components or suffer Do not use Picture Light near people’s faces.
  • Page 12 If you have a weak heart, take In case that the display part or If the display is broken and the extra precautions when setting camera lens is damaged, make liquid crystal then leaks, do not functions such as the vibrator sure to pay attention to a get the liquid on your skin and ring tone volume for...

  • Page 13: Handling Battery Pack

    Use of the FOMA terminal may Check that the battery pack is facing If the battery pack leaks or cause skin irritations such as the correct direction before you emits an unusual odor, itchiness, rashes or eczema in attach it to the FOMA terminal. If you immediately stop use and move some people.

  • Page 14: Handling Adapters And Desktop Holder

    If the battery fluid leaks, do not Take care not to short-circuit the If the fuse in the DC adapter get the liquid on your skin charging terminal when connected blows, always replace it with a (face, hands, etc.). to an outlet or cigarette lighter fuse of the specified type.

  • Page 15: Handling Uim

    Always unplug the power plug If you have an implanted Warning from the outlet or cigarette cardiac pacemaker or an lighter socket before cleaning implanted Observe the following in the adapters. cardioverter-defibrillator, hospitals or other medical May cause fires, burns or electric shock. always carry or use your FOMA facilities.

  • Page 16: Material List

    Material list Material/Surface Material/Surface Part Part treatment treatment Lever POM resin Infrared port ABS resin Material/Surface Part treatment EPDM/Silicon Charger terminal SUS/Gold plating Gasket coating Side surface, SUS/Nickel Back Inside microSD Card slot Side of 1Seg Radio IFL 12 (Magnetic plating cover antenna...

  • Page 17: Handling Precautions

    Handling Precautions Clean only with a soft and dry cloth (such Read the respective manuals supplied General notes as the type used for eyeglasses). with the FOMA terminal and adapters • Forceful rubbing of LCD with a dry cloth carefully. SH-07B is waterproof/dust-proof, however, may scratch LCD surface.
  • Page 18 Do not close the FOMA terminal on strap, Notes about the FOMA Notes about battery pack etc. terminal May damage the handset and cause Battery pack is a consumable product. malfunction. Though usage time varies with use, change Do not forcefully press a surface of the The FOMA terminal becomes warm during battery if battery level is extremely low even touch panel, or operate with a pointed...
  • Page 19 ® Notes about adapters Notes about UIM Notes on using Bluetooth function Charge battery in areas where ambient Do not apply unnecessary force when temperature is between 5°C and 35°C. inserting/removing the UIM. The FOMA terminal supports the security Do not charge battery pack in the Customer is responsible for malfunctions function that meets the Bluetooth following locations.

  • Page 20: Felica Reader/Writer

    Radio frequencies FeliCa reader/writer Caution The radio frequencies the Bluetooth function of the FOMA terminal uses are as The FeliCa reader/writer function in the Never use the FOMA terminal that is follows. FOMA terminal uses weak electric waves modified. Using a modified device violates in the handling of which does not require a the Radio Law.

  • Page 21: Things To Keep In Mind

    Waterproofness/Dust-proofness SH-07B is waterproof to IPX5 (former JIS protection code You can rinse off dirt from the FOMA terminal. Wash the FOMA terminal with low-pressure water flow (6 liters/min or lower and tap and IPX7 (former JIS protection code 7) standards, water at room temperature (between 5°C and 35°C)), holding it and dust-proof to IP5X (JIS protection code 5)
  • Page 22 Opening external connector terminal cover and HDMI terminal cover Hook a finger on the slot to open. Slot Back cover Slot Closing external connector terminal cover and HDMI terminal cover Push and close securely in the direction of the arrow so that gaps are not left between the FOMA terminal and the external connector terminal cover or the HDMI terminal cover.
  • Page 23 Removing back cover Precautions Slide the back cover lever to unlock (1), When your hands or the FOMA terminal are wet, do not attach/ remove the back cover or open/close the external connector hook a nail on the slot and remove the terminal cover and the HDMI terminal cover.
  • Page 24 Do not let the FOMA terminal get wet with liquids other than water at room temperature (between 5°C and 35°C). Do not wash the FOMA terminal in a washing machine, etc. To prevent condensation, do not bring the FOMA terminal from a cold place to a bathroom, etc.

  • Page 25: Draining Water When The Foma Terminal Gets Wet

    Shake the FOMA terminal approximately Draining water when the FOMA 20 times, securely holding its hinge terminal gets wet section, until there is no more water splattering When the FOMA terminal is wet, water may flow out after wiping it off. Drain the water following the steps below. Wipe the FOMA terminal surface with dry and clean cloth, etc.
  • Page 26 Softly press dry and clean cloth, etc. Charging against the FOMA terminal to wipe off Accessories and optional parts are not waterproof/ water remaining in the mouthpiece, dust-proof. Check the followings before and after earpiece, speaker, keys or hinges charging. Pat the opening with cloth to remove water because there may Make sure that the FOMA terminal is not wet.

  • Page 27: Before Use

    Before Use Basic Operation Inserting UIM (FOMA card) and Turn a recycle mark Tabs battery pack side up, match tabs and attach the battery A UIM is an IC card that records personal information, such as pack phone numbers, etc. The FOMA terminal does not support the UIM (blue).
  • Page 28 Charging Charging LED It is recommended that the accompanying desktop holder be used for charging to prevent water from seeping or dust from getting in Connector caused by forgetting to close the external connector terminal cover. (Turn the side with The AC adapter and desktop holder are not waterproof/dust-proof.
  • Page 29 Hold the release buttons (1) and Charging by using AC adapter horizontally remove the connector (2) Read the user’s guide of FOMA AC Adapter 01/02 (sold when charging is complete separately). Charge alert is heard and charging LED turns off when Open the external connector terminal cover and charging is complete.

  • Page 30: Turning Power On

    Turning power on Checking your own phone number H (for at least 2 seconds) ][Profile] Stand-by display appears when initial settings are complete. Press H for at least 2 seconds to turn the power off. Saving your own name and image ][Profile] Changing screen display to English C/enter the terminal security...

  • Page 31: Screen Explanation

    Screen Explanation Viewing display/icon Bluetooth Ir communication UIM error Self mode Icon display area Music&Video Channel program reservation Full Browser 3G/GSM VeilView Main icons Battery level USB connection Record message (High b Low) Keypad dial lock Signal status b b b (Strong b Weak) Manner mode When [...
  • Page 32 Checking stock icon details Displaying and operating i-Widget Stock icons appear in the stand-by display when a call is missed or a In the i-Widget screen, you can simultaneously activate multiple new mail is received. Widget Appli and display them as a list. For details on operation of i-Widget nP.73 Number of entries Message...
  • Page 33 Setting Stand-by accessory Display and operation of Stand-by accessory ][Setting]/[Screen/Display]/ [Stand-by display setting]/[Stand-by Stand-by accessory allows you to perform various functions by displaying contents (Accessory icon) such as calculator, clock or slide accessory]/[ON] show in the stand-by display. 1Area where accessory Viewing sub display icon is pasted The following shows a screen when clock display is set to [Stand-by...

  • Page 34: Viewing Main Menu

    Viewing main menu Set, change or register functions from the menu screens. You can select the icon displayed on the menu to retrieve the function. Functions and designs of the normal menu differ depending on the Kisekae tool set. Stand-by display * Press for at least 1 second Shortcut menu Normal menu...

  • Page 35: Key Operation

    Key operation Multi-guide key and operation guidance key Use to select or execute the menus displayed in the operation guidance. & & & Main menu displayed in the operation guidance Set selected item Submenu Display the submenu End key Clear key Agree Check selected item Use to end the function being...

  • Page 36: Menu Operation

    Menu operation Selecting a function from submenu When [Submenu] appears in the operation guidance, functions Select a menu with touch panel as well as key operation. (submenu) that can be used in the screen appear by pressing z. For details on the available functions nP.91 &...
  • Page 37 Basic operation of touch panel Operation Main purpose Quickly slide Switch pages in a list screen, Operation Main purpose Quickly slide your finger and put etc. it off. Display previous/next data Touch Select/OK while displaying images or Put your finger on the touch mails panel and put it off.

  • Page 38: Entering Characters

    Character Entry Entering characters Entering characters The explanations in this manual are based on method for entering Example: When entering “電話” characters in 5-touch entry method. In the character entry Switching entry modes screen, enter “でんわ” でんわ: 4 (four times)/* Switch entry modes to enter various types of characters.
  • Page 39 Entering pictograms/symbols Copying characters In the character entry screen, C In the character entry screen, z /[Copy] To switch between pictograms and Deco-mail pictograms: C [Copy/Cut/etc.]) To switch between single- and double-byte symbols: z * For a mail message & Select a pictogram/symbol/t &...

  • Page 40: Changing Ring Tone

    Sound/Screen Setting Changing ring tone Setting keypad sound off ][Setting]/[Sound/Vibration/ ][Setting]/[Sound/Vibration/ Manner]/[Ring tone] Manner]/[Adjust volume]/[Operation sound] Select an item & & ;[Call ring alert]/[Call ring alert] Set to [Silent] with ;[Videophone] Setting vibrator ;[Mail]/[Mail ring tone] Set each item/C You can set the vibrator to notify you of incoming calls, mails, alarms, GPS function, information, i-appli and touching the touch panel.

  • Page 41: Using Manner Mode

    Using manner mode Changing screen setting You can set the FOMA terminal on mute. Changing main display Camera shutter sound and record start/end sound are heard even ][Setting]/[Screen/Display]/ while the manner mode is set. [Stand-by display setting]/[Image/ ^# (for at least 1 second)/select i-appli] &...

  • Page 42: Setting Machi-Chara

    Preventing others from seeing display Setting Machi-chara clearly You can display a character in the stand-by display. ][Setting]/[Screen/Display]/ If you set VeilView, you can prevent others from seeing your display by displaying patterns. [Machi-chara setting] $ (for at least 1 second) Set each item/C ;...
  • Page 43 Changing illumination for incoming Checking missed calls or new mails calls with LED ][Setting]/[Backlight/ LED flashes at approximately 4-second intervals and notify you of missed calls and new mails. Illumination]/[Light alert]/[Called light] ][Setting]/[Screen/Display]/[Each Set each item/C display setting]/[Info display & light]/ [Indicator light]/[ON] When selecting illumination...

  • Page 44: Adjusting Display Brightness

    Setting light of display and keypad Adjusting display brightness Adjust display brightness. Setting light time of display and keypad You can select from 5 display brightness levels. Check brightness with adjusting. You can set the length of light time for each function when the FOMA The display brightness is automatically adjusted according to the terminal is not in use for a set length of time.

  • Page 45: Various Security Codes

    Lock/Security Various security codes Terminal security code (for various functions) Some functions for convenient use of the FOMA terminal require security codes. [0000] is set by default but you can change the code. Precautions for various security codes If you enter the wrong terminal security code five times Do not use easily estimated numbers for security codes to be continuously, the power is turned off.

  • Page 46: Network Security Code

    Network security code PIN1 code/PIN2 code You set arbitrary code at the time of subscription but you can [0000] is set at the time of subscription but you can change the change the code. code. Network security code is a four-digit code required for confirming the You can set two security codes, PIN1 code and PIN2 code, on the subscriber’s identity when an order is received at a docomo Shop, UIM.

  • Page 47: Various Lock Functions

    Changing PIN1 code/PIN2 code Various lock functions When the PIN1 entry ON/OFF is set to [OFF], you cannot change the PIN1 code. Lock Operation/Restriction function ][Setting]/[Lock/Security]/[UIM All lock Prevents all operations other than power on/off and setting]/select the PIN code to change/ answering calls.

  • Page 48: Incoming Call Restriction

    Incoming call restriction Lock Operation/Restriction function Rejecting a call with no caller ID Auto lock Lock can be automatically set when display is turned off. Lock is temporarily disabled when the terminal You can set the handset to reject calls with no caller ID depending on security code is entered in the terminal security code reason (User unset, Payphone, Unavailable).

  • Page 49: Resetting To Default

    Resetting to default Using remote reset/remote customization Resetting various functions You can use remote reset/remote customization by For items return to default by Reset nP.91 manager’s request with the subscription of this function ][Setting]/[Other setting]/[Reset] (Business mopera anshin manager). Remote reset: You can initialize various data (memory &...

  • Page 50: Making A Voice/Videophone Call

    Call Connect Making a voice/videophone call Making a call with redials/received calls & & (Received calls) (Redial)/q DOCOMO videophones comply with “3G-324M as defined by the international 3GPP standard”. Connection is not available with Select a phone number videophones using other standards. s (Phone)/i (V.phone) to make a call Making a call by entering a phone number ^enter a phone number...

  • Page 51: Making An International Call

    Making an international call Receiving a voice/videophone call WORLD CALL is an international calling service available from A call is received DOCOMO mobile phones. The ring tone sounds and the called LED flashes. WORLD CALL is registered when FOMA services are registered When the caller does not send a caller ID, a non-disclosure (excluding users who did not apply for WORLD CALL).

  • Page 52: Using Various Network Services

    When you cannot answer call Setting public mode (Power off) The FOMA terminal plays the message stating you cannot answer the Setting record message (voice/videophone phone when the power is off. calls) ^*25251/s If you set record message, the FOMA terminal answers a call and ;...

  • Page 53: Setting Call Waiting

    Refer to “Mobile Phone User’s Guide [Network Services]” for details Services available for the FOMA on each network service. terminal For subscription and inquiries, contact the number listed in “General Inquiries” on the back of this manual. For weather forecast, enter the number, starting with the area code Setting Voice Mail Service of the area you want to know the weather.

  • Page 54: Using Overseas

    The FOMA terminal supports “Location notification of emergency Using overseas call”. When dialing an emergency number such as 110, 119, and 118, the information of your location (location information) is International roaming (WORLD WING) is a service that automatically notified to the agency that receives the emergency enables you to use the same FOMA terminal as you use call (e.g.
  • Page 55 Available services overseas Making a call outside your country of stay (including Japan) Communication service GSM GPRS Make a call from your country of stay to Japan or other countries. Voice call Videophone ^0 (for at least 1 second)/enter country code, area code (city code) and i-mode other party’s phone number i-mode mail...

  • Page 56: Sending Deco-Mail/Decome-Anime

    Mail You can exchange mails with other i-mode terminals and Sending Deco-mail/Decome-Anime e-mail via Internet by subscribing to i-mode service. You can attach up to ten files (pictures, moving picture Sending Deco-mail files, etc.) in total of 2 MB to a message. Also, Deco-mail is available.
  • Page 57 Sending Decome-Anime Checking received i-mode mail You can compose an expressive mail with Flash Receive i-mode mail movies using templates. The receive complete screen appears and the mail ring tone sounds. If you do not operate for approximately 15 seconds, the screen before reception reappears.

  • Page 58: Using Sms

    Sorting i-mode mail Setting Area Mail ^m/[Mail setting]/[Early Set sort rules for user folders in Inbox/Outbox and sort i-mode mail and SMS automatically. warning “Area Mail” setting]/[Receive Multiple sort rules can be set for one folder. setting] Select a folder/z/[Sort rules] &...

  • Page 59: Adding Entries To Phonebook

    Phonebook You can use the FOMA terminal phonebook and UIM Adding entries from redials/received calls to phonebook. phonebook Adding entries to phonebook & & (Received calls) (Redial)/q Main entry items Select a phone number/z/[Add]/ Item Details [Add to phonebook] Name Enter a name.

  • Page 60: I-Mode/Full Browser

    i-mode/Full Browser Search i-mode enables you to use online services, such as Viewing i-mode site connection to sites and Internet. You can view sites that are not supported by i-mode as ^i/select an they appear on PCs using Full Browser. &...

  • Page 61: Switching Browsers

    Switching browsers Viewing and operating sites Note that different transmission charges are incurred when Selecting a link and moving to a new screen switching between i-mode and Full Browser. & While viewing sites, select a link with Switching from i-mode to Full Browser &...

  • Page 62: Saving Site Contents

    Saving frequently viewed sites Saving site contents You can save frequently viewed sites and Internet web You can add (save) screens from your favorite sites, etc. pages as bookmarks for convenient access. as screen memos to the FOMA terminal or microSD Card. z/[Bookmark]/ While viewing sites, z/[Screen While viewing sites,...

  • Page 63: Displaying I-Channel

    i-Channel ※ The i-Channel service is provided in Japanese. Displaying i-Channel i-Channel is a service that sends news and other ^c (J) information. The latest information received automatically is displayed in the stand-by display using a & Select a channel/t ticker.

  • Page 64: Checking Your Location

    Map/GPS Note that DOCOMO shall not be liable for the pure economic loss if Checking your location you cannot confirm the positioning (communication) result with the You can check your location by positioning the present location. You FOMA terminal failure, malfunction, error or external factors such can use this function for more convenient use such as displaying a as power failure (including battery exhaustion).

  • Page 65: Using Auto-Gps

    Using AUTO-GPS Setting AUTO-GPS function ][Map/Overseas]/[Map&GPS ※ The AUTO-GPS service is provided in Japanese. According to your present location, you can receive setting/history]/[AUTO-GPS]/ various services, such as providing surrounding [AUTO-GPS setting] information including weather information, store information, etc., or sight-seeing information. &...
  • Page 66 Camera Enjoy Screen layout and operations for Main key operations for shooting screen shooting screen Shoot by scene Fix camera shake Camera gallery Select image quality Shooting screen layout Switch still/moving picture White balance & Adjust brightness Auto timer Still picture Moving picture &...
  • Page 67 Shooting still pictures Confirming shot still/moving ][camera/TV/MUSIC]/[Camera]/ pictures [Still image shooting] Displaying shot still pictures When still pictures shooting is activated, shooting LED illuminates. ][Data box]/[My picture] & to shoot & [Camera] folder/select an image/t & to save To set as stand-by display, etc.: z/[Set screen]/select an &...

  • Page 68: Shooting By Various Methods

    Shooting by various methods Function Details Setting/Starting method z/C/ Bracket Shoot continuously with adjusting exposure. You can In the still picture shooting screen, select and save your favorite picture. [Shooting menu]/[Continuous mode]/[Bracket] z/C/ Best select photo Shoot continuously just before shutter operation. You can In the still picture shooting screen, select and save your favorite picture.

  • Page 69: Using 1Seg

    1Seg About battery level Using 1Seg When recording is started with low battery level or battery level 1Seg is a service provided by TV broadcasters becomes low while recording, the message stating that recording is (broadcast stations), etc. Transmission charges are not impossible appears and then the recording ends.

  • Page 70: Setting Channels

    Setting channels Using preset Select a prefecture/district to use and save into the channel list. To watch 1Seg, set the channels first. ][camera/TV/MUSIC]/[1Seg]/ Auto channel setting [Channel setting] Select a prefecture/district to use. Broadcast station is automatically When the confirmation screen appears: [Yes]/[Use preset]/ searched and saved into the channel list.
  • Page 71 Screen layout and operations for Main key operations for 1Seg watching screen These key operations are for the video mode. watching screen & Select a station with UP/DOWN 1 to 9, *, 0, # Select a station with one-touch 1Seg watching screen layout operation &...

  • Page 72: Music&Video Channel

    Music Handling the music data Music&Video Channel ® This manual refers to Chaku-uta full and WMA (Windows Media ※ The Music&Video Channel service is provided in Japanese. Audio) files played using MUSIC Player as “music data”. Music&Video Channel is a service that set music •...

  • Page 73: Setting Programs

    Setting programs Screen layout and operations for MUSIC Player screen ][camera/TV/MUSIC]/[Music&Video ch]/[Program setting] MUSIC Player screen layout When the confirmation screen appears, select [Yes]. Follow instructions on screen and set a program ] appears in the stand-by display 12 hours before the Jacket image program distribution.

  • Page 74: Playing Music Data

    Main key operations for MUSIC Player Playing music data screen ][Data box]/[MUSIC] & Pause/Play & Select music data/t Stop & Adjust volume Mute/Disable The music data previously played resumes from the position when & Play previous song/Return to the playback stopped if beginning of song [Continue] is selected.

  • Page 75: Activating I-Appli

    i-appli/i-Widget “i-appli” is software for the i-mode compatible mobile Activating i-appli phone. Download various software from i-mode sites for ][i-appli]/[Software list] more convenient use of the FOMA terminal, such as updating stock prices or weather information & Select software/t automatically, or enjoying games without connecting to the network, etc.
  • Page 76 i-motion/Movie i-motion refers to image, voice and music data. You can Playing i-motion downloaded from download i-motion to the FOMA terminal from i-motion sites compatible sites, etc. and play the downloaded i-motion. Also, you can search for i-motion compatible sites in [メ &...

  • Page 77: More Convenient

    Osaifu-Keitai More Convenient Osaifu-Keitai/ToruCa Holding over scanning devices Hold the b mark of the FOMA terminal over the scanning device to Osaifu-Keitai is a function which has built-in IC card and use as electronic money or railway tickets, or retrieve ToruCa. allows you to pay, use as coupon tickets or collect Pay attention to the following points when holding the b mark over stamps by simply holding the FOMA terminal over the...
  • Page 78 In addition to monthly usage fees of i-concier, a separate fee may ® “ひつじのしつじくん ” be incurred depending on contents (information, i-schedule, etc.). ©NTT DOCOMO Packet transmission charges are incurred for receiving information excluding some cases. & /select the &...

  • Page 79: Using Schedules

    Convenient Tools Using schedules Using bar code reader ][Tool]/[Schedule] You can connect to i-mode or Full Browser, compose a mail, make voice/videophone calls, compose SMS and & & /select a To check a schedule: Select a date with run i-appli with scanned text from bar codes (JAN/QR &...

  • Page 80: Bluetooth Function

    Bluetooth function Connecting to registered Bluetooth devices ][Tool]/[Bluetooth]/[List/cnnct/ You can connect the FOMA terminal to Bluetooth devices wirelessly. discnct] Wireless communications with all the Bluetooth devices are not Select a Bluetooth device to connect completely guaranteed. Electromagnetic signals from the Bluetooth device may affect the &...
  • Page 81 Using Swing Talk Enter characters and quickly shake the FOMA terminal. Entered characters float in the air. ][Tool]/[Swing Talk] C/enter & characters/t Enter up to 10 double-byte characters. Close the FOMA terminal and quickly shake to the left/right It will end in approximately 60 seconds after the FOMA terminal is closed.
  • Page 82 Other convenient tools Function name Details Starting method ][camera/TV/MUSIC]/[Camera]/[Shotmemo] Shot memo You can use images as memos by correcting tilt of shot images, or correcting characters with white background to read easily. ][camera/TV/MUSIC]/[Camera]/[Kanji/Eng Kanji/English Grabber You can scan kanji and English words and display readings or meanings.

  • Page 83: Data Management

    Data Management When a microSD Card formatted with another FOMA terminal or PC Using microSD Card is used, the displayed folder name may differ. When a microSD Card used with another FOMA terminal or PC is You can save data, such as the phonebook, mail or inserted, it may not be used.
  • Page 84 Inserting/Removing microSD Card Copying data to microSD Card/FOMA terminal Insert the microSD Card with the metal terminal side turned up Example: i-motion Gently push the microSD Card in before removing. ][Data box]/[i-motion/Movie] (/[b ｍicroSD])* * When the save destination is microSD Select i-motion/z/[Move/Copy]/ [Copy to microSD]/[Copy to the phone]...

  • Page 85: Receiving Data

    Sending and receiving data via Ir Sending and receiving data via iC communication communication 15° 15° Infrared port Approx. 20 cm or less Face the infrared ports of the receiver’s and sender’s FOMA terminal each other and set the distance between them to approximately 20 cm or less.
  • Page 86 Connecting to PC By connecting the FOMA terminal and your PC, exchange WMA files and images in the microSD Card. In addition, connect to Internet and perform data communication. FOMA USB Cable with Charge Function 02 (sold separately) or FOMA USB Cable (sold separately) is required. For a data communication, installation of the FOMA communication configuration file from the accompanying CD-ROM is required.

  • Page 87: Troubleshooting

    Support Others Terminal operation Troubleshooting Becomes hot while operating/charging First, check whether the software update is required. If it is required, Temperature of the FOMA terminal, battery pack, or adapter update the software (nP.88). may rise while operating or charging, or when performing If there is no improvement in problems even after checking the following –...

  • Page 88: Warranty And After-Sales Service

    Warranty and After-Sales Service UIM does not recognize Is a UIM inserted facing right direction? P.25 Make sure the UIM (blue) is not inserted. P.25 Warranty Calling Make sure that the warranty card is included with your FOMA terminal at Calls cannot be made with the dial the time of purchase.

  • Page 89: I-Mode Fault Diagnosis Site

    During the warranty period Do not peel off the model nameplate attached to the FOMA terminal. If the nameplate seal does not function as a certification, repairs may be The FOMA terminal will be repaired without charge in accordance with the terms of the warranty.

  • Page 90: Updating Software

    If software update fails, [Rewrite failed] appears and all operations Updating software are not available. In this case, bring the FOMA terminal to a repair center that DOCOMO specifies. You can update software if the FOMA terminal software Updating software is not available overseas. need to be updated using packet transmission.
  • Page 91 Checking harmful data Displaying scanned results Displaying detected errors Delete or stop activating any data or applications that could cause operational malfunctions. These types of If you select [Detail] in the warning screen, error data include data or programs that are downloaded to the names appear.

  • Page 92: Introduction Of Options And Related Devices

    Carry Case L 01 Introduction of options and related Bone conduction microphone/receiver 01 devices FOMA USB Cable with Charge Function 02 FOMA Portable Charging Adapter 01 Combine the FOMA terminal with various optional FOMA Indoor Booster Antenna (Stand Type) *1 Refer to P.27 for details on charging with an AC adapter. accessories (sold separately) for expanded personal and *2 Connect Earphone Plug Adapter for External connector terminal business use.
  • Page 93 Appendix Menu list Mail Mail setting Receive setting When settings are reset by Reset (nP.47), functions return to default Display settings (marked with Edit signature • Some items may include functions which do not return to default Common phrases/Store word settings.
  • Page 94 i-mode/web camera/TV/MUSIC i-mode/web setting i-mode Browser Set. Camera Shotmemo FB Settings Kanji/Eng Grabber Common Settings Bar code reader Check i-mode setting Card reader Reset i-mode setting Information reader Full Browser Home Column reader i-appli menu Shotdeco Motiondeco i-appli Hand mirror Software list Still image album i-appli call logs...
  • Page 95 Tool Data box Quick launcher Search functions Chara-den Search phonebook 1Seg Swing Talk Other Wellness Run i-appli Data box search Check no. of steps Album Register profile Tool menu Settings Tool Handwriting Bar code reader Presentation Calculator Manga&BookReader Alarm Document Viewer Infrared/iC communications Receive infrared data Data Security Service...

  • Page 96: Setting Menu

    Tool TEL function Contact DOCOMO Call duration/charge Last call cost ドコモ総合案内 ・ 受付 Call duration ドコモ故障問合せ TEL function menu Reset call cost Call cost limit TEL function Hide call cost icon Phonebook Search phonebook Chaku-moji Create message Add to phonebook Message display settings UIM operation 2in1...
  • Page 97 Setting Setting Screen/Display Sub-display setting Battery eco mode Machi-chara setting Battery level Menu preference Battery icon setting Auto SW vert/horiz Icon% temp display Sound/Vibration/Manner Ring tone External connection USB mode Other sounds Bluetooth Adjust volume Femtocell Vibration mode Data exchange settings Silent mode Other setting Self mode...

  • Page 98: Profile Menu

    Osaifu-Keitai menu Map/Overseas Map&GPS setting/history Positioning mode setting Osaifu-Keitai LCS clients list IC card content Service setting DCMX Host number setting ToruCa Light color/Alert IC card lock setting IC card lock Overseas network search 3G/GSM setting Timed lock Network search setting Programed activation PLMN setting IC lock(power-off)

  • Page 99: Main Specifications

    Main specifications Main camera: CCD Type Image Sub camera: CMOS pickup Package Main camera: 1/2.3 inches device Size Sub camera: 1/8.2 inches Product name SH-07B Main camera: Approx. 12.1 million pixels Effective pixels Approx. 113 (H) × Approx. 52 (W) × Sub camera: Approx.

  • Page 100: Battery Pack

    *6 A CCD (Charge Coupled Device) and a CMOS (Complementary i-motion: Approx. 460 min Metal-Oxide Semiconductor) are image devices equivalent to the film of ® Chaku-uta full (Compatible with silver salt cameras. background playback): Approx. 3,190 *7 Image size: QVGA (240 × 320 dots)/Image quality: NORMAL/File size: 25 KB WMA file (Compatible with background *8 The number is the number of still pictures that can be shot when not...
  • Page 101 Number of saved/registered entries in the Number of applicable Data type entries to be saved/ FOMA terminal registered Number of applicable *2, 7 Machi-chara Data type entries to be saved/ *2, 7 Chara-den registered Melody *1, 2 Phonebook 2,000 *2, 7 PDF data 1Seg TVlink...

  • Page 102: Specific Absorption Rate (Sar) Of Mobile Phone

    Hereby, Sharp Telecommunications of Europe Ltd, declares http://www.telec.or.jp/ENG/Index_e.htm that this SH-07B is in compliance with the essential requirements and other relevant provisions of Directive NTT DOCOMO 1999/5/EC. http://www.nttdocomo.co.jp/english/product/sar/ A copy of the original declaration of conformity can be found at the following Internet address:...
  • Page 103 The exposure standard for wireless handsets employs a unit of FCC Notice measurement known as the Specific Absorption Rate, or SAR. The SAR This device complies with part 15 of the FCC Rules. limit set by the FCC is 1.6 W/kg. Operation is subject to the following two conditions: The tests are performed in positions and locations (e.g., at the ear and worn (1) This device may not cause harmful interference, and (2) this device...

  • Page 104: Export Administration Regulations

    “i-motion”, “i-mode”, “DCMX”, “WORLD WING”, “WORLD CALL”, Exchange and International Trade Law” and its related laws) will “OFFICEED”, “i-area”, “2in1”, “docomo PRIME series”, the “i-mode” logo, be applied to this product and its accessories under certain the “FOMA” logo, the “i-appli” logo are trademarks or registered conditions.
  • Page 105 This handset features LCFONT, developed by Sharp Corporation, to HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. make the LCD easier to view and read. LCフォント/LCFONT and ラクラク瞬漢／瞬英ルーペ is a trademark of Information System are registered trademarks of Sharp Corporation.
  • Page 106 ® ® ® This product is licensed under the MPEG-4 Systems Patent Portfolio Contains Adobe Flash Lite ® License for encoding in compliance with the MPEG-4 Systems Standard. Adobe Reader Mobile technology by An additional license and payment of royalties are necessary in the Adobe Systems Incorporated following cases.
  • Page 107 The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR and any use of such marks by NTT DOCOMO, INC. is under license. CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, Other trademarks and trade names are those of their respective owners.
  • Page 108 Index Numerics Before using 1Seg..... . 67 Desktop holder......26 Bluetooth .
  • Page 109 Handling precautions ....15 Light time-out ......42 Network security code .
  • Page 110 Receive a videophone call ....49 Send data Receive data iC communication ....83 iC communication .

  • Page 111: Using Mobile Phone With Your Manners

    Check/Change the subscription, apply for various services, and request various information materials online. From i-mode iMenu/お客様サポート (user support)/お申込 ・ お手続き (Applications/Procedures)/各種お申込 ・ お 手続き (Various Applications/Procedures) Packet communication charges free (in Japanese only) From a PC My docomo (http://www.mydocomo.com/)/各種お申込 ・ お手続き (Various Applications/Procedures) (in Japanese only) ※...
  • Page 112 ’10.5 (1st Edition) 10E SM112 ...

  • Page 113: Manual For Pc Connection

    SH-07B Manual for PC Connection Data communication............1 Before using data communication .

  • Page 114: Data Communication

    Data communication Data communication available for the FOMA terminal The FOMA terminal communication formats fall into three categories: packet transmission, 64K data communication and data transfer. The FOMA terminal does not support fax transmissions. The FOMA terminal supports data communication with sigmarionⅢ. The high-speed communication for FOMA HIGH-SPEED area is not supported.

  • Page 115: Before Using Data Communication

    Things to keep in mind Internet service provider fees ■ When using the Internet, usage fees are charged by the Internet service provider. These usage fees, paid to the Internet service provider, are separate from the FOMA service fee. Contact your Internet service provider for more information about usage fees.

  • Page 116: Required Equipment

    Take the steps below when menus do not appear even if the CD-ROM is set. For Windows 7 In the [スタート] (Start) menu of Windows, specify [<CD-ROM drive name>:index.html] in the [プログラムと ファイルの検索] (Program and file search) field and click [index.html] displayed in the search result field. For Windows Vista In the [スタート] (Start) menu of Windows, specify [<CD-ROM drive name>:index.html] in the [検索の開始] (Start search) field and click [index.html] displayed in the search result field.

  • Page 117: Flow Of Setup For Data Communication

    Flow of setup for data communication This section describes the preparation required to connect the FOMA terminal to your PC, and use a packet transmission and 64K data communication. The flow is as shown below. For USB connection For Bluetooth connection Download and install the FOMA communication Connect the FOMA terminal wirelessly to your PC configuration file...

  • Page 118: Connecting Up Pc To The Foma Terminal

    Connecting up PC to the FOMA terminal Connect the FOMA terminal to your PC with both devices turned on. If the FOMA terminal is connected to your PC, [x] appears on the FOMA terminal screen. If the FOMA communication configuration file is not installed, install the file before connecting the FOMA terminal to the PC (nP.

  • Page 119: Installing Foma Communication Configuration File

    Installing FOMA communication configuration file To make data communication by connecting the FOMA terminal to a PC via FOMA USB Cable with Charge Function 02 (sold separately), the FOMA communication configuration file is required. End all resident software before the FOMA communication configuration file (Driver) is installed. For Bluetooth connection, installing the FOMA communication configuration file is not required.
  • Page 120 Make sure that [セットアップ後ドライバインストールを開始する。 ] (Start installing driver after setup.) shows E and click [セットアップ開始] (Start setting up). : When H appears instead, change to E. When the setup complete screen appears, click [OK]. Click [インストール開始] (Start install). Connect the FOMA terminal to your PC via FOMA USB Cable with Charge Function 02 when [FOMA SH07BとPCをFOMA USB接続ケーブルにて接続してく...
  • Page 121 Click on each device, and confirm the name of the installed device. Confirm that the names of all the installed devices are displayed for [ユニバーサル シリアル バス コントローラー] (Universal Serial Bus controllers), [ポート (COMとLPT)] (Ports (COM and LPT)) and [モデム] (Modems). : The following drivers are installed when the FOMA communication configuration file is installed.
  • Page 122 Double-click [FOMA SH07B USB]. For Windows XP Select [FOMA SH07B USB]. Click [変更と削除] (Change/Remove). When [FOMA SH07B ドライバーのアンインストールを行います。 ] (Uninstall FOMA SH07B driver.) appears, click [はい] (Yes). : Uninstallation of the FOMA communication configuration file begins. When [アンインストールは完了しました。 PCを再起動してください。 ] (Uninstallation of the driver is completed.

  • Page 123: Preparing Bluetooth Connection

    Preparing Bluetooth connection Make data communication by connecting the FOMA terminal wirelessly to a Bluetooth compatible When making data communication using Bluetooth function, the transmission speeds of FOMA terminal is for HIGH-SPEED, however, the data communication may not be available at maximum speed because the transmission speeds of Bluetooth function have limitations.
  • Page 124 Confirming modem Before setting communication, confirm the name and COM port number of the modem set for connecting the dial-up service. Operate the PC. Example: Confirming Windows 7 drivers The screens are different for Windows Vista and Windows XP. Click [スタート] (Start) menu/[コントロールパネル] (Control panel) and click [システムとセキュリティ] (System and security).

  • Page 125: Set Network Transmission With Docomo Connection Manager

    Set network transmission with DOCOMO Connection Manager DOCOMO Connection Manager “DOCOMO Connection Manager” is a software which is convenient for using flat-rate data communication and measured-rate data communication. Easily subscribe to mopera U or set the PC depending on the subscription. In addition, use the charge counter function to check the approximate amounts of data transmission or usage fee.
  • Page 126 Setting Internet Explorer Before installing this software, set the connection setting to [ダイヤルしない] (No) on the internet option of Internet Explorer. Activate Internet Explorer and click [ツール] (Tool)/ [インターネットオプション] (Internet option). Click the [接続] (Connection) tab and then select [ダ イヤルしない] (No).

  • Page 127: Installing Docomo Connection Manager

    Installing DOCOMO Connection Manager Example: Installing to Windows 7 The screens are different for Windows Vista and Windows XP. Insert the accompanying CD-ROM into your PC. Click [インターネット接続] (Internet connection)/[インストール] (Install) in the [本CD-ROMからのFOMAデータ通信の設定方法] (Setting method for FOMA data communication using this CD-ROM) field. : When [インストール] (Install) is clicked, the following warning message may appear.
  • Page 128 Click [次へ] (Next). Confirm the content and click [次へ] (Next). : The precaution appears. Make sure to confirm its content. Click [キャンセル] (Cancel) to cancel the installation. Read the licensing agreement and select [使用許諾契約の条項に同意します] (Agree to articles of the user licensing agreement) and then click [次へ] (Next) to agree.
  • Page 129 Click [インストール] (Install). : Installation begins. Click [完了] (Finish). : Installation is completed. For Windows XP, when MSXML6 and Wireless LAN API are not installed, their installation is required before installing DOCOMO Connection Manager. When confirmation screen appears, click [Install] and install MSXML6 and Wireless LAN API.
  • Page 130 Activating DOCOMO Connection Manager Select [スタート] (Start) menu/[NTT DOCOMO]/[ドコモ コネクションマネー ジャ] (DOCOMO Connection Manager)/[ドコモ コネクションマネー ジャ] (DOCOMO Connection Manager). : When the software is activated for the first time, the setting wizard appear. Operate and make the setting according to the guidance from the software to prepare for the connection to the Internet.

  • Page 131: Set Network Transmission Without Using Docomo Connection Manager

    Set network transmission without using DOCOMO Connection Manager Setting communications for packet transmission and 64K data communication This section describes how to set up packet transmission and 64K data communication without using DOCOMO Connection Manager. To make the settings, communication software for entering AT commands are required. “Hyper terminal” is used here.
  • Page 132 Enter a name (such as a host name) in the [名前] (Name) field and click [OK]. : The advanced settings screen for phone number appears. Select [FOMA SH07B] from [接続方法] (Connection method), enter a temporary number in the [電話番号] (Phone number) field that does not actually exist (such as [0]), and click [OK].
  • Page 133 When confirming APN settings using AT commands : AT+CGDCONT?o Refer to P. 33 for details on AT commands. Confirm that [OK] appears and select [ハイパーターミナルの終了] (Exit hyper terminal) from the [ファイル] (File) menu. : Hyper terminal ends. : [セッション×××を保存しますか？] (Save session xxx?) appears.

  • Page 134: Setting Dial-Up Network

    Send/Not send setting on dial-up networks ■ Adding “186” (Send) and “184” (Not send) to the host number in dial-up networks is also possible. Setting “186” (Send) and “184” (Not send) in both the *DGPIR command setting and the dial-up network setting results in the following.
  • Page 135 Setting a dial-up network on Windows 7 and Windows Vista ■ On Windows 7, use “ネットワークの接続ウィザード” (Network connection wizard) to set the host (APN). Example: Using <cid>=3 to connect to mopera U, the DOCOMO Internet connection service on Windows 7 The screens are different for Windows Vista.
  • Page 136 Click [スタート] (Start) menu/[コントロールパネル] (Control panel). For Windows Vista Click [スタート] (Start) menu/[ネットワーク] (Networking). Click [ネットワークと共有センター] (Network and sharing center)/[ネットワーク接続の管 理] (Manage network connections) and proceed to step 12. Click [ネットワークとインターネット] (Network and Internet). Click [ネットワークと共有センター] (Network and sharing center)/[アダプター の設定の変更] (Change adapter setting) in [タスク] (Task).
  • Page 137 Check all options to show H and click [OK]. : The option setting screen reappears. Click [OK]. : The host and TCP/IP protocol are set. : Refer to P. 26 for details on connecting to dial-up network. ■ Setting a dial-up network on Windows XP On Windows XP, use “ネットワークの接続ウィザード”...
  • Page 138 Enter the host number in the [電話番号] (Phone number) field and click [次へ] (Next). : The Internet account information screen appears. : To connect to <cid>=3 (mopera U), enter “*99***3#”. Set options as shown in the example screen and click [次へ] (Next). : The new connection wizard complete screen appears.
  • Page 139 Click the [ネットワーク] (Networking) tab, confirm all settings and click [設定] (Settings). : Set [呼び出すダイヤルアップサーバーの種類] (Type of dial-up server to call) to [PPP: Windows95/98/NT4/2000, Internet]. : In the [この接続は次の項目を使用します] (Components checked are used by this connection) field, E should appear only for [インターネットプロ トコル...
  • Page 140 Double-click the connection icon. : The connection screen appears. : Alternatively, select the host icon and then select [接 続] (Connect) in the [ファイル] (File) menu to display the connection screen. Confirm the settings and click [ダイヤル] (Dial-up). : The FOMA is connected to the host. : The phone number set in “Setting dial-up network”...

  • Page 141: Sending And Receiving Data (Obex ™ Communication)

    ™ Sending and receiving data (OBEX communication) Sending/Receiving FOMA terminal data to/from a PC The FOMA terminal has OBEX ™ function as a data communication protocol. Connect the FOMA terminal to your PC via FOMA USB Cable with Charge Function 02 (sold separately), and the data communication (data communication with OBEX ™...
  • Page 142 Sending single data item (Write 1) Send data from a PC to a FOMA terminal one item at a time. Sending one item at a time from a FOMA terminal to a PC is not possible. Data transfer operating methods differ depending on the software used. Refer to the software manual for details.

  • Page 143: List Of At Command

    List of AT command AT commands AT commands are commands used to set the FOMA terminal functions from a PC. When AT commands are entered from a PC, the FOMA terminal performs the corresponding operations. AT command input format ■ AT commands must always start with “AT”.
  • Page 144 List of AT command [M]: AT commands that can be used with the FOMA SH07B Modem Port. Execution AT command Overview Parameter/Explanation example The modem function of the FOMA terminal can be controlled by adding commands in the ― list to the end of this command. ※...
  • Page 145 Execution AT command Overview Parameter/Explanation example AT*DGAPL=<n> Sets host (APN) to accept Adds or deletes from Accept calls list with <n> AT*DGAPL=0,1o [,<cid>] transmissions for incoming packet parameter. If <cid> parameter is abbreviated, communications. APN settings adds (<n>=0) or deletes (<n>=1) all of <cid> AT*DGAPL?o use <cid>...
  • Page 146 Execution AT command Overview Parameter/Explanation example AT+CBC Inquires the battery status. The result from this command is in the AT+CBCo following format. +CBC:0,80 +CBC:<bcs>,<bcl> <bcs> 0 : The battery operates the FOMA terminal 1 : Charging the battery 2 : The battery is unconnected 3 : Reducing the power <bcl>...
  • Page 147 Execution AT command Overview Parameter/Explanation example AT+CLIP=<n> Shows PC calling number when <n> AT+CLIP=0o receiving 64K data 0 : Does not output results (default setting) communication. 1 : Outputs results Displays +CLIP:<n>,<m> for “AT+CLIP?”. AT+CLIP?o <m> +CLIP:0,1 0 : NW setting to not send own number during transmissions 1 : NW setting to send own number during transmissions...
  • Page 148 Execution AT command Overview Parameter/Explanation example AT+COPS=[<m Selects a telecommunications <mode> AT+COPS ode>[,<format>[ carrier to be connected. 0 : Auto (Automatically searches network and =1,2,“44F001” ,<oper>]]] switch telecommunications carriers) 1 : Manual (Connects to the telecommunications carrier specified in <oper>) 2 : Cancels (disconnects) the connection to (Connects to the telecommunications carrier...
  • Page 149 Execution AT command Overview Parameter/Explanation example AT+CR=<mode> Sets whether to display packet <mode> AT+CR=1o transmission/64K data 0 : Does not display when line is connected communication before (default setting) ATD*99***1# “CONNECT” result code is 1 : Displays when line is connected +CR:GPRS displayed during line connection.
  • Page 150 +++ (Does not appear) ― ATHo NO CARRIER ATI<n> Displays the verification code. n=0 : NTT DoCoMo ATI0o n=1 : Displays abbreviated product name NTT DoCoMo (FOMA SH07B) n=2 : Displays the product version in a format such as “VerX.XX”...
  • Page 151 Execution AT command Overview Parameter/Explanation example Returns to online data mode from ATOo online command mode during CONNECT ― communication. ATQ<n> Sets whether to display result n=0 : Displays result codes (default setting) ATQ0o codes. n=1 : Does not display result codes ATV<n>...
  • Page 152 Execution AT command Overview Parameter/Explanation example ATS5=<n> Sets the backspace (BS) When detected while entering an AT ATS5=8o character. command, the last character in the input buffer is deleted. The settings cannot be ATS5?o changed (default setting: n=8). ATS6=<n> Sets pause time (seconds) until Sets a register, but has no other effect.

  • Page 153: Error Reports

    Reasons for disconnection Packet transmission ■ Value Reason Host (APN) does not exist, or was incorrect. Disconnected by network. No packet transmission subscription. Disconnected properly. 64K data communication ■ Value Reason Specified number does not exist. Disconnected properly. Line busy. Number was dialed, but no response received within specified time.
  • Page 154 Operation when parameter is abbreviated AT+CGDCONT= Clears all <cid> settings. Resets <cid>=1 to 4 setting to default value. AT+CGDCONT=<cid> Clears specified <cid> setting. Resets <cid>=1 to 4 setting to default value. AT+CGDCONT=? Displays list of values that can be set. AT+CGDCONT? Displays current settings.

  • Page 155: Result Codes

    Command name: +CGEQREQ=[parameter] ■ Overview Sets QoS (Quality of Service) required of the network when establishing PPP packet transmission. Not stored in FOMA terminal’s memory with AT&W commands. Not reset with AT&F or ATZ commands. Syntax AT+CGEQREQ=[<cid> [,<Traffic class> [,<Maximum bitrate UL> [,<Maximum bitrate DL> [,,,,<Maximum SDU size>]]]]]o Parameter description This setting is assigned to each cid by default value.
  • Page 156 Numerical display Text display Meaning NO ANSWER Connection completed. The server connection timed out. RESTRICTION Network restricted. DELAYED Redial restricted. Extended result codes ■ Numerical display Text display Meaning CONNECT 1200 FOMA terminal and PC connected at 1,200 bps. CONNECT 2400 FOMA terminal and PC connected at 2,400 bps.

  • Page 157: Kuten Code List

    Kuten Code List ’10.5 (1st Edition)
  • Page 158 Use four-digit kuten codes to enter kanji, hiragana, katakana, symbol, and alphanumeric characters. Each kuten code corresponds to a particular character. Refer to “Inputting Kuten Code” of the user’s guide for details. If an unregistered kuten code is entered, either a space or nothing will be entered. Some entries in the kuten code list may differ from on the screen.
  • Page 159 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 肩...
  • Page 160 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 枠...
  • Page 161 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 浚...

This manual is also suitable for:

Sh-07b