Advertisement
Quick Links
Advertisement
Related Manuals for Bosch WNC254A0ES
Summary of Contents for Bosch WNC254A0ES
- Page 1 Washer dryer WNC254A0ES [en] User manual and installation instructions...
- Page 2 en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety .......... 3 11 Laundry ........ 2 8 1.1 General information...
- Page 3 Safety en 16.4 Setting the basic dosage 19.3 Cleaning the drain pump .. 3 9 amount ........ 3 4 19.4 Cleaning the rubber gasket .. 4 1 17 Home Connect ...... 3 4 20 Troubleshooting...
- Page 4 en Safety 1.2 Intended use Only use this appliance: ¡ for washing machine-washable fabrics and hand-washable wool in accordance with the care label. ¡ with tap water and commercially available detergents and care products suitable for washing machines. ¡ for drying and freshening up fabrics that are washed with water and suitable for dryers.
- Page 5 Safety en Never equip the appliance with an external switching device, e.g. a timer or remote control. Never connect the appliance to a circuit that is regularly switched on and off by the energy supplier. When the appliance is installed, the mains plug of the power cord must be freely accessible.
- Page 6 en Safety Align the appliance using the appliance feet and a spirit level. If hoses and power cords have been laid incorrectly, this causes a tripping hazard. Lay hoses and power cords in such a way that there is no risk of tripping.
- Page 7 Safety en When spinning larger, waterproof items of laundry, imbalances may arise and lead to injuries. Do not wash and spin larger items of laundry, such as blankets or mattress covers, in the appliance. WARNING ‒ Risk of suffocation! Children may breathe in or swallow small parts, causing them to suffocate.
- Page 8 en Safety WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. Do not interrupt the drying programme early. If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance.
- Page 9 Preventing material damage en Repairs to the appliance should only be carried out by trained specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk.
- Page 10 en Environmental protection and saving energy Material damage may be caused if Never re-use water hoses that the water inlet hose is connected in- have been used before. correctly. Operating the appliance using water Tighten the screw connections on that is dirty or too hot may lead to the water inlet until they are hand- material damage and damage to the tight.
- Page 11 Installation and connection en Add detergent based on the laun- Remove any accessories from the dry's degree of soiling. Detergent drum. dosage Close the door. Reduce the washing temperature 4.2 Contents of package for lightly and normally soiled laun- dry. After unpacking all parts, check for Set the maximum spin speed if any damage in transit and complete- you want to dry the laundry in the...
- Page 12 en Installation and connection Installation loca- Requirements WARNING tion Risk of injury! When using the appliance on a base, nected to adja- the appliance may tip over. cent cabinets. Re- Always secure the feet of the appli- quired niche ance to a base using the manufac- width: 60 cm.
- Page 13 Installation and connection en Unscrew and remove all of Insert the 4 cover caps the screws for the 4 transit bolts push them downwards using a WAF 13 wrench. Note: To install the transit bolts to Remove the power cable from the transport the appliance, perform holder.
- Page 14 en Installation and connection Connect the water inlet hose to a Sink Fix and secure the tap (26.4 mm = 3/4"). water outlet hose with an elbow. "Accessories", Page 28 Plastic pipe with Fix and secure the rubber sleeve water outlet hose with an elbow. "Accessories", Page 28 Open the water tap carefully and...
- Page 15 Before using for the first time en Use a WAF 17 wrench to loosen 5 Before using for the the lock nuts in a clockwise direc- Before using for the first time first time tion. Prepare the appliance for use. 5.1 Starting an empty washing cycle Your appliance was inspected thor- oughly before leaving the factory.
- Page 16 en Familiarising yourself with your appliance Add washing powder containing To prevent foaming, use only half oxygen bleach to the manual dos- of the amount of detergent recom- ing compartment. mended by the detergent manufac- turer for light soiling. Do not use detergent suitable for woollens or delicates.
- Page 17 Familiarising yourself with your appliance en Maintenance flap for the drain Page 14 Water outlet hose pump Power cord Page 14 Page 30 Door Transit bolts Detergent drawer Page 17 Page 13 Water inlet hose Page 18 Control panel 6.2 Detergent drawer Manual dosing compartment "Using the manual dosing Note: Observe the manufacturer's in-...
- Page 18 en Familiarising yourself with your appliance 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. ATTENTION Page 24 Programmes Pressing on the display with force Page 21 and display Buttons may cause damage.
- Page 19 Display en To display the additional buttons, briefly press Más. To hide the additional buttons, briefly press Más again. The display shows all additional Changing a setting value buttons. If you activate certain settings, the display shows selection buttons and you can change the setting value. Press the selection buttons Page 22 .
- Page 20 en Display Display Description 0:40 1 Expected programme duration or programme time re- maining in hours and minutes. 1 Program end time "Buttons", Page 22 1 Recommendation for the maximum load capacity for the selected program in kg. Page 22 - 1400 Set spin speed in rpm. ...
- Page 21 Buttons en Display Description Lights up: The intelligent dosing system for liquid deter- gent or fabric softener is activated. Flashes: The fill level of the dispenser is below the min- Page 32 imum level. (liquid detergent) (fabric softener) 1 Page 34 50 ml Basic dosage for detergent or fabric softener.
- Page 22 en Buttons Button Selection Description If the control panel does not respond, press and hold for approximately 5 seconds to restart the appliance. "The display and buttons do not re- spond.", Page 45 Multiple selection To change a setting, press the selection button until the display shows the required setting.
- Page 23 Buttons en Button Selection Description Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is deac- tivated, place the detergent directly in the drum for the prewash and into the manual dosing compartment for the Page 17 main wash.
- Page 24 en Programmes Button Selection Description i-DOS 1 Activate Briefly press the button to activate or Deactivate deactivate the intelligent dosing system Setting the basic for liquid detergent . dosage amount Press and hold the button for approx. 3 seconds to set the basic dosage. Page 34 ...
- Page 25 Programmes en Programme Description Max. Max. load load (kg) (kg) Wash- Drying Algodón/Al- Wash hard-wearing items made from cotton or 10.0 godão linen. 1 Also suitable as a short programme for nor- mally soiled laundry when you activate Speed Perfect. Programme setting: Max.
- Page 26 en Programmes Programme Description Max. Max. load load (kg) (kg) Wash- Drying To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool. Programme setting: Max. 40 °C Max.
- Page 27 Programmes en Programme Description Max. Max. load load (kg) (kg) Wash- Drying The degree of soiling and the type of fabric are automatically detected. The washing pro- cess is adapted. Note: The temperature and spin speed cannot be adjusted in this programme and are set automatically.
- Page 28 en Accessories Programme Description Max. Max. load load (kg) (kg) Wash- Drying Sintéticos Wash items made from synthetic fabrics. Suitable for lightly soiled laundry. Tip: Energy- and time-optimised programme using hybrid technology. Programme setting: Max. 60 °C Max. 1400 rpm 10 Accessories Accessories Use original accessories.
- Page 29 Detergents and care products en Remove curtain fittings and lead Symbol Fabrics strips Do not tumble dry items Wash small or particularly delicate made from silk, nylon, air- items in a mesh washing bag impermeable and rubber- Wash large and small items of coated fabrics, synthetic laundry together curtains...
- Page 30 en Basic operation 13.3 Saving the programme 13 Basic operation settings Basic operation 13.1 Switching on the appli- You can save your individual pro- ance gramme settings as favourites. Requirement: A programme is set. Note: If you switch the appliance on Page 30 the first time after you have connec- ...
- Page 31 Basic operation en "Laundry", Page 28 Press The drum is empty. During the washing cycle, the ap- Page 30 Page 19 Open the door. pliance pauses. Place the laundry in the drum. During the drying cycle, the appli- Close the door. ance checks whether it is possible Ensure that there is no laundry to add laundry.
- Page 32 en Dryness level 13.11 Put the appliance into 15 Childproof lock standby mode Childproof lock Secure your appliance against being Press . operated unintentionally using the Cleaning the rubber gasket. controls. Page 41 Note: Leave the appliance door and 15.1 Activating the childproof the detergent drawer open to dry. lock Press and hold 3 seg for ap-...
- Page 33 Intelligent dosing system en notification during operation of the 16.2 Using the manual dosing appliance, fill the dispensers. compartment Notes If you are not using the intelligent Only pour suitable liquid detergent dosing system, if intelligent dosing is and fabric softener into the dis- not possible for a programme, or if Page 29 pensers.
- Page 34 en Home Connect 16.4 Setting the basic dosage Notes Please note the safety precautions amount in this instruction manual and To allow for intelligent dosing, set the make sure that they are also ob- basic dosage amount for the dis- served when operating the appli- penser.
- Page 35 Home Connect en 17.3 Activating Wi-Fi on the 17.6 Remote start appliance Enable the appliance for remote start via the Home Connect app. Press and hold Inicio remoto for approx. 3 seconds. Note Press Inicio remoto repeatedly Remote start will be deactivated in until the display shows "oFF". the following circumstances: Press to activate the Wi-Fi.
- Page 36 en Basic settings This initial registration prepares the No basic setting. Home Connect functions for use and Activate (on) or deactivate (oFF) is only required when you want to the reminder to clean the drum. use the Home Connect functions for the first time. Display the number of finished programmes (PC).
- Page 37 Pull out the detergent drawer. proved machine care and machine Press down on the insert and re- cleaner products online at https:// move the detergent drawer. www.bosch-home.com/store or from customer service. Run the Algodón/Algodão 90° programme without laundry but with washing powder that contains...
- Page 38 en Cleaning and servicing Unclip the detergent drawer cover Clean the detergent drawer and and remove it. the cover with a soft, damp cloth or hand shower. Empty the detergent drawer. Dry the detergent drawer, cover and pump unit and reinsert them. Clean the pump unit with a damp cloth.
- Page 39 Cleaning and servicing en Clean the housing of the detergent Slide a suitable receptacle under drawer in the appliance. the opening for draining the deter- gent solution. Push in the detergent drawer. Take the drain hose out of the 19.3 Cleaning the drain pump holder.
- Page 40 en Cleaning and servicing Once emptied, press firmly on the Loosen the dirt and remove the locking cap. filter insert. Insert the drain hose into the The pump cap is comprised of two holder. parts which can be taken apart for cleaning.
- Page 41 Cleaning and servicing en Insert the pump cap. 19.4 Cleaning the rubber gas- Ensure that the parts of the pump cap are correctly as- Clean the rubber gasket regularly. sembled. Page 30 Open the door. Remove any foreign objects and fluff from the rubber gasket. Screw the pump cap as far as it will go.
- Page 42 en Troubleshooting 20 Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. Repairs to the appliance should only be carried out by trained specialist staff.
- Page 43 Troubleshooting en Fault Cause and troubleshooting H:32 The appliance has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum. E:30 -10 / H:95 / The tap is turned off. Turn on the tap. The water inlet hose is kinked or jammed. Check the installation of the water inlet hose.
- Page 44 en Troubleshooting Fault Cause and troubleshooting All other error codes. Malfunction To restart the appliance, press and hold for ap- proximately 5 seconds. If the fault occurs again, disconnect the appliance from the power supply for at least 30 seconds. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box.
- Page 45 Troubleshooting en Fault Cause and troubleshooting The display and but- Software fault. tons do not respond. To restart the appliance, press and hold for ap- proximately 5 seconds. If the fault occurs again, disconnect the appliance from the power supply for at least 30 seconds. Un- plug the appliance from the mains or switch off the circuit breaker in the fuse box.
- Page 46 en Troubleshooting Fault Cause and troubleshooting The appliance is vi- Appliance is not correctly aligned. Page 14 brating, 'wandering' Align the appliance. and making loud The appliance feet are not fixed. noises during the spin Page 14 Secure the appliance's feet. cycle.
- Page 47 Troubleshooting en Fault Cause and troubleshooting Insufficient cleaning or The detergent in the dispenser is unsuitable or detergent residues on thickened. Page 29 the laundry. Check whether the detergent is suitable. Check whether the detergent in the dispenser has thickened. If the detergent is unsuitable or has thickened, Page 37 empty it out and clean the dispenser.
- Page 48 en Troubleshooting Fault Cause and troubleshooting The laundry is too The laundry has not been spun sufficiently. damp. Always select the highest possible spin speed for the washing programme in question. Creasing. The selected programme is unsuitable for the type of fabric.
- Page 49 Transportation, storage and disposal en 20.1 Emergency release Use a screwdriver to remove the 4 cover caps. Releasing the door Requirement: The drain pump is empty. ATTENTION ‒ Escaping water may cause material damage. Do not open the door if you can see water through the glass. Pull the emergency unlock down- wards with a tool and release.
- Page 50 en Customer Service Cut through the power cord. the consecutive numbering (Z-Nr.) of Dispose of the appliance in an en- your appliance. vironmentally friendly manner. You can find the contact details for Information about current disposal our customer service via the QR methods are available from your code on the enclosed document on specialist dealer or local authority.
- Page 51 Consumption values en nected with Aqua-Stop according If your appliance is fitted with to our instructions; this also in- Aqua-Stop, you can in principle cludes correctly fitting the Aqua- leave your appliance unattended Stop extension (genuine access- during operation and the tap ory).
- Page 52 en Technical data Programme Load Pro- Energy Water Max- Spin Resid- (kg) gramm con- con- imum speed 1 e dura- sump- sump- temper- (rpm) mois- tion tion tion (l/ ature ture 1 1 1 (h:min) (kWh/ cycle) (°C) 5 1 1 cycle) mins Algodón/Al-...
- Page 53 Technical data en Please send your request to oss- Length of the wa- 150 cm request@bshg.com or BSH Hausger- ter outlet hose äte GmbH, Carl-Wery-Str.34, 81739 Length of the 201 cm Munich, Germany. power cord Subject: „OSSREQUEST“ This product contains light sources The cost of performing your request from energy efficiency class F.
- Page 54 BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your ap- pliance.
- Page 55 Declaration of Conformity en Name and address of manufacturer BSH Hausgeräte GmbH, Carl-Wery- Strasse 34, 81739 München, Ger- many This statement of compliance is pre- pared by the manufacturer. The manufacturer, BSH Hausgeräte GmbH deems that it has complied with provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1;...
- Page 56 You'll find it here. Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the WNC254A0ES and is the answer not in the manual?
Questions and answers