Download
Share
Print this page
Bosch WNC554A0TC User Manual And Installation Instructions
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Washer/Dryer
  5. WNC554A0TC
  6. User manual and installation instructions
Bosch WNC554A0TC User Manual And Installation Instructions

Bosch WNC554A0TC User Manual And Installation Instructions

Hide thumbs Also See for WNC554A0TC:

Advertisement

Quick Links

Download this manual
Washer dryer
WNC554A0TC
[en]
User manual and installation
instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the WNC554A0TC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bosch WNC554A0TC

Summary of Contents for Bosch WNC554A0TC

  • Page 1 Washer dryer WNC554A0TC [en] User manual and installation instructions...

  • Page 2: Table Of Contents

    Further information and explanations are available online: Table of contents 1 Safety ...........  4 8 Buttons ........  25 1.1 General information.... 4 9 Programmes ......  28 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories......  32 1.4 Safe installation ...... 5 11 Laundry........  32 1.5 Safe use ........
  • Page 3 16 Intelligent dosing system ..  36 21.3 Using the appliance again .. 53 16.1 Pouring liquid detergent 21.4 Disposing of old appliance ...  54 and fabric softener into the dispensers ...... 36 22 Customer Service....  54 22.1 Product number (E-Nr.), 16.2 Using the manual dosing production number (FD) compartment ......

  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...

  • Page 5: Safe Installation

    Safety en Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications;...
  • Page 6 en Safety If the insulation of the power cord is damaged, this is dangerous. ▶ Never let the power cord come into contact with hot appliance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges.

  • Page 7: Safe Use

    Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
  • Page 8 en Safety WARNING ‒ Risk of suffocation! Children may breathe in or swallow small parts, causing them to suffocate. ▶ Keep small parts away from children. ▶ Do not let children play with small parts. WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion.
  • Page 9 Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance.

  • Page 10: Safe Cleaning And Maintenance

    en Safety 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Never make any technical modifications to the appliance or its features. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶...

  • Page 11: Preventing Material Damage

    Preventing material damage en Connect the water inlet hose dir- ▶ Preventing material damage 2 Preventing material ectly to the water tap, without any additional connecting elements damage such as adapters, extensions or valves. Preventing material damage ATTENTION! Make sure that the valve housing ▶...

  • Page 12: Environmental Protection And Saving Energy

    en Environmental protection and saving energy Unsuitable cleaning products may Add detergent based on the laun- damage the surfaces of the appli- dry's degree of soiling. ance. a For light to normal soiling, a smal- Do not use harsh or abrasive de- ▶...

  • Page 13: Energy Saving Mode

    Installation and connection en 3.3 Energy saving mode 4.2 Contents of package If you do not use the appliance for a After unpacking all parts, check for brief period, it automatically switches any damage in transit and complete- to energy-saving mode. All displays ness of the delivery.
  • Page 14 en Installation and connection Installation loca- Requirements WARNING tion Risk of injury! When using the appliance on a base, Kitchen unit Only install the the appliance may tip over. appliance under- Always secure the feet of the appli- neath a continu- ▶...

  • Page 15: Connecting The Appliance

    Installation and connection en Unscrew and remove all of Put on the 4 cover caps. the screws for the 4 transit bolts using a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transit bolts to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves.

  • Page 16: Aligning The Appliance

    en Installation and connection Connect the water inlet hose to a Plastic pipe with Fix and secure tap (26.4 mm = 3/4"). rubber sleeve the water outlet hose with an el- bow. → "Accessories", Page 32 Connecting the appliance to the electricity supply Note: Your electrical domestic install- ation for this appliance must comply with the local legal provisions and Open the water tap carefully and...

  • Page 17: Before Using For The First Time

    Before using for the first time en To align the appliance, turn the ap- Before using for the first time 5 Before using for the pliance feet. Check that the appli- ance is level using a spirit level. first time Prepare the appliance for use. Before using for the first time 5.1 Starting an empty wash- ing cycle...
  • Page 18 en Before using for the first time Start the first wash cycle or press to put the appliance in standby mode. → "Basic operation", Page 33...

  • Page 19: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.

  • Page 20: Control Panel

    en Familiarising yourself with your appliance Manual dosing compartment → "Using the manual dosing compartment", Page 37 / : Dispenser for fabric softener or liquid detergent → "Intelligent dosing system", Page 36 : Dispenser for liquid deter- gent → "Intelligent dosing system", Page 36 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.

  • Page 21: Display

    Familiarising yourself with your appliance en tings by pressing the buttons. The ac- To display the additional buttons, tivated settings are highlighted briefly press 更多. brightly on the display. ATTENTION! Pressing on the display with force a The display shows all additional may cause damage.
  • Page 22 en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 25 Recommendation for the maximum load capacity for the selected program in kg.
  • Page 23 Display en Display Description The "Cooking fat/cooking oil" stain type is activated. Change the basic settings. → Page 40 Flashes: Drum cleaning is required. Run the 槽潔淨 pro- gramme for cleaning and caring for the drum and the outer tub. → "Cleaning the drum", Page 41 ¡...
  • Page 24 en Display Display Description The appliance has detected too much foam. → " or heavy foam build-up.", Page 48 ¡ Lights up: The door is locked. – To add laundry, the door can be unlocked. → "Adding laundry", Page 34 – To open the door, you can cancel the programme. → "Cancelling the washing programme", Page 35 ¡...
  • Page 25 Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection Description (mains ¡ Switch on Switch on the appliance or put it in switch) standby mode. ¡ Standby mode If the control panel does not respond, ¡...
  • Page 26 en Buttons Button Selection Description ¡ +1 Activate or deactivate up to three ad- 加洗清 ditional rinse cycles. ¡ +2 Recommended for particularly sensit- ¡ +3 ive skin or in regions with very soft water. ¡ Activate → "Childproof lock", Page 36 童鎖3秒 ¡...
  • Page 27 Buttons en Button Selection Description i-DOS 1 ¡ Activate Briefly press the button to activate or deactivate the intelligent dosing sys- ¡ Deactivate tem for liquid detergent . ¡ Setting the basic Press and hold the button for approx. dosage amount 3 seconds to set the basic dosage.

  • Page 28: Programmes

    en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Dry- Wash- Hand- or machine-washable items that are 羊毛 made from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses.
  • Page 29 Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash- Use a detergent that is suitable for down or delicates. Use sparingly. Do not use fabric softener. Note: To prevent excessive foaming, remove air from laundry items by rolling them up be- fore you wash them.
  • Page 30 en Programmes Programme Description Max. Max. load load (kg) (kg) Dry- Wash- – Kill bacteria in textiles made of cotton or tex- 除菌烘 tiles filled with down. Note: The laundry is not dried or cleaned. – Reduce creases and airborne odours in suits, 清新除味...
  • Page 31 Programmes en Programme Description Max. Max. load load (kg) (kg) Dry- Wash- Also suitable as a short programme for nor- mally soiled laundry when you activate 超省時. Tip: Energy- and time-optimised programme using hybrid technology. Programme setting: ¡ Max. 90 °C ¡ Max. 1400 rpm Wash items made from cotton, linen or syn- 混合衣物...

  • Page 32: Accessories

    en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 54. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx.

  • Page 33: Detergents And Care Products

    Detergents and care products en Requirement: The appliance has Detergents and care products 12 Detergents and care been correctly installed and connec- ted. → Page 13 products Press . ▶ You can protect your appliance and Detergents and care products The switch-on process takes a few your laundry by selecting and using seconds.

  • Page 34: Opening The Door

    en Basic operation Note: To overwrite the saved pro- 13.6 Starting the programme gramme, repeat the steps above. Note: If the intelligent dosing system is activated, make sure that the dis- 13.4 Opening the door pensers have been filled → Page 36 Press on the edge of the door. and the basic dosage has been set → Page 37.

  • Page 35: Cancelling The Washing Programme

    Dryness level en Press Wipe the rubber gasket dry and re- move any foreign objects. 13.8 Cancelling the washing programme Press Open the door. → Page 34 The appliance door remains locked for safety reasons if the temperature and water levels are high. – If the temperature is high, start the programme.

  • Page 36: Childproof Lock

    en Childproof lock 16.1 Pouring liquid detergent Childproof lock 15 Childproof lock and fabric softener into Secure your appliance against being Childproof lock the dispensers operated unintentionally using the If you are using the intelligent dosing controls. system or if the appliance displays a notification during operation of the 15.1 Activating the childproof appliance, fill the dispensers.

  • Page 37: Adapting The Penser

    Intelligent dosing system en Open the lid and pour liquid deter- 16.3 Adapting the / dis- gent and fabric softener into penser the relevant dispensers → Page 19. / dispenser can dose fabric softener or liquid detergent . When it leaves the factory, the dis- penser is set for fabric softener.

  • Page 38: Home Connect

    en Home Connect Press and hold i-DOS 1 for approx. 17.1 Setting up the 3 seconds. Home Connect app a The display shows the set basic Install the Home Connect app on dosage amount. your mobile device. To adjust the setting, press Start the Home Connect app and Wait briefly to save the setting.

  • Page 39: Deactivating Wi-Fi On The Appliance

    Home Connect en 17.4 Deactivating Wi-Fi on the 17.7 Remote start appliance Enable the appliance for remote start via the Home Connect app. Press and hold 遠端遙控 for ap- prox. 3 seconds. Note Remote start will be deactivated in Press 遠端遙控 repeatedly until the the following circumstances: display shows "on".

  • Page 40: Overview Of The Basic Settings

    en Basic settings This initial registration prepares the Set the display brightness: Home Connect functions for use and 1 (low) to 4 (very high) is only required when you want to Activate (on) or deactivate use the Home Connect functions for (oFF) the reminder to clean the first time.

  • Page 41: Cleaning And Servicing

    Cleaning and servicing en Protect the electrical connection ▶ Cleaning and servicing 19 Cleaning and servi- on the rear against water, deter- gent and fabric softener residue. cing Put the appliance into standby To keep your appliance working effi- Cleaning and servicing mode.
  • Page 42 en Cleaning and servicing Unclip the detergent drawer cover Clean the detergent drawer and and remove it. the cover with a soft, damp cloth or hand shower. Empty the detergent drawer. Dry the detergent drawer, cover and pump unit and reinsert them. Clean the pump unit with a damp cloth.

  • Page 43: Cleaning The Drain Pump

    Cleaning and servicing en Clean the housing of the detergent Slide a sufficiently large container drawer in the appliance. under the opening. Push in the detergent drawer. Take the drain hose out of the holder. 19.3 Cleaning the drain pump Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g.
  • Page 44 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 43 hot. Since water may remain in the Do not touch the hot detergent ▶...

  • Page 45: Cleaning The Intake Opening In The Rubber Gasket

    Cleaning and servicing en Ensure that both impellers can Insert and close the maintenance turn. flap. Insert the pump cap. 19.4 Cleaning the intake Ensure that the parts of the ‒ opening in the rubber pump cap are correctly as- sembled. gasket Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening.

  • Page 46: Troubleshooting

    en Troubleshooting Troubleshooting 20 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶...
  • Page 47 Troubleshooting en Fault Cause and troubleshooting "E:10 / -00 / -10 / The pump for the intelligent dosing system is blocked. -20" Clean the detergent drawer. → Page 41 If the fault persists, call customer service. → Page 54 Note: Until the fault is rectified, you can deactivate the intelligent dosing system and dose manually.
  • Page 48 en Troubleshooting Fault Cause and troubleshooting Check that the pump unit is inserted correctly. ▶ → Page 41 flashes and the pro- The appliance has detected fluctuations in the power gramme is paused. supply. No action required. If the power supply is stable, the programme continues to run as normal.
  • Page 49 Troubleshooting en Fault Cause and troubleshooting Home Connect is not Different causes are possible. working properly. Set up Home Connect again. → Page 38 ▶ Go to www.home-connect.com. ▶ cannot be oper- Not a fault. The drying phase is active. ated. No remedial action possible. i-DOS 1/i-DOS 2 can- The selected programme or programme progress not be pressed.
  • Page 50 en Troubleshooting Fault Cause and troubleshooting High spin speed not The appliance is using a reduced spin speed to elim- reached. inate an imbalance. No action required. The programme dura- Not a fault. The programme sequence is optimised tion changes during electronically, another rinse cycle is switched on due the wash cycle.
  • Page 51 Troubleshooting en Fault Cause and troubleshooting Fluff on the laundry. Fluff has accumulated in the drum. Start the 槽潔淨 programme without any laundry or ▶ detergent. The laundry is too wet A low spin speed is selected. after the spinning Start the 脫水 programme. ▶...
  • Page 52 en Troubleshooting Fault Cause and troubleshooting Creasing. Prepare the laundry. → Page 32 ▶ The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Easy Care fabrics have been dried for too long.

  • Page 53: Emergency Release

    Transportation, storage and disposal en Empty the dispensers. 20.1 Emergency release Releasing the door 21.2 Inserting the transit bolts Requirement: The drain pump is empty. → Page 43 Secure the appliance before trans- ATTENTION! Escaping water may portation using transit bolts in order cause material damage. to prevent transport damage.

  • Page 54: Customer Service

    Customer Service directory or on our which prevents appliance from website. opening fully. Please visit: https://www.bosch- With redundant appliances, unplug ▶ home.com.tw/specials/rohs for the power cord. Then cut through Taiwan Restriction of the use of cer-...

  • Page 55: Declaration Of Conformity

    Directive stallation protec- 2014/53/EU. tion A detailed RED Declaration of Con- Nominal power 2000 W formity can be found online at www.bosch-home.com among the Water pressure ¡ Minimum: additional documents on the product 100 kPa page for your appliance. (1 bar) ¡ Maximum: 1000 kPa...
  • Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.