Advertisement
Here are descriptions of every setup items:
Fragment
Threshold(1):
RTS Threshold(2):
Beacon Interval(3):
DTIM Period(4):
Data Rate(5):
N Data Rate(6):
Channel Width(7):
Preamble Type(8):
Broadcast ESSID(9): Decide if the wireless Smart Repeater will broadcast its
Set the Fragment threshold of wireless radio.
Do not modify default value if you don't know what
it is, default value is 2346.
Set the RTS threshold of wireless radio. Do not modify
default value if you don't know what it is, default
value is 2347.
Set the beacon interval of wireless radio. Do not
modify default value if you don't know what it is,
default value is 100.
Set the DTIM period of wireless radio. Do not modify
default value if you don't know what it is, default
value is 3.
Set the wireless data transfer rate to a certain value.
Since most of wireless devices will negotiate with each
other and pick a proper data transfer rate automatically,
it's not necessary to change this value unless you
know what will happen after modification.
Same as above, but only for 802.11n clients.
Set channel width of wireless radio. Do not modify
default value if you don't know what it is, default
setting is 'Auto 20/40 MHz'.
Set the type of preamble, do not modify default value
if you don't know what it is, default setting is 'Short
Preamble'.
own ESSID or not. You can hide the ESSID of your
wireless Smart Repeater (set the option to 'Disable'), so
only those people who know the ESSID of your wireless
58
Advertisement
