Belt Warning System; Adjusting Shoulder Seat Belt; Lap-Shoulder Belt - Audi 100 Quattro Owner's Manual

CONTROLS AND EQUIPMENT

Belt warning system

A chime and a warning light are
interconnected with the driver's safety
belt.
Every time the ignition is turned on, the
safety belt warning light will come on for
about six seconds as a reminder to
buckle up. If the driver does not fasten
the safety belt, the chime will also come
on for the duration of this six second
period. With the driver's door closed, the
chime will go off as soon as the driver
has buckled up.
18

Adjusting shoulder seat belt

The front seat shoulder belt anchor on
the door pillar can be adjusted up or
down to accommodate the height of the
driver and the front passenger. The
second position from top is the standard
position.
§
To adjust push the handle up or
down to position the shoulder belt
midway over the shoulder – never
across the neck. See illustration on the
next page.
§
Pull on the shoulder belt to check
whether belt anchor is securely locked in
place.
Always heed WARNINGS on page 15

Lap-shoulder belt

The combination lap-shoulder belt is
equipped with a locking retractor. The
system adjusts automatically to your size
and movements as long as the pull on
the belt is slow.
Hard braking or a collision locks the belt.
The belt will also lock when you drive up
or down a steep hill or in a sharp curve.
§
Before fastening the safety belt first
adjust your seat-see page 23.
§
To fasten, grasp belt tongue and pull
belt in continuous slow motion across
your chest and lap.