Sealey VS2081 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instructions protection
1. SAFETY
WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.
‰
WARNING! Always use caution when working around fuel systems. The fuel in the fuel rail may be pressurised even if the
‰
engine is not running.
IMPORTANT: These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service instructions, or a
9
proprietary manual, to establish the current procedure and data, also any warnings or cautions particular to the vehicle.
DO NOT use the set if any parts are missing or damaged.
8
DO NOT use this tool for any purpose other than that for which it is designed.
8
Switch off vehicle's ignition and disconnect the battery before commencing work under the bonnet.
9
Never lay tools on the vehicle's battery. This may short the terminals together, causing harm to yourself, the tools, or the battery.
9
Operate in a well ventilated area. DO NOT inhale fuel vapours.
9
Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist.
9
NOTE: An Impact Socket must NOT be used with this tool. Stripped threads and bent thrust cups/rings are not accepted warranty
claims on this tool.
Keep children and other unauthorised persons away from the working area.
9
Keep yourself, tools, and test equipment away from hot engine parts.
9
Always keep a fire extinguisher that is suitable for fuel/electrical/chemical fires close by.
9
NEVER smoke or have open flames near vehicle.
8
Always relieve fuel pressure before disconnecting fuel lines from injectors.
9
Use a cloth to cover fuel line fittings when connecting or disconnecting fuel lines. Avoid contact with fuel.
9
Clean up all fuel spills immediately and dispose of all used cloths properly.
9
Maintain the tool components in good and clean condition for best and safest performance.
9
When work on the vehicle is finished, ensure all connections on vehicle are restored, and that there are no tools left in the engine bay.
9
Replace tools in the carrying case and store in a safe, dry, childproof location.
9
2. INTRODUCTION
Designed for easy removal and installation of plastic-bodied petrol injectors, found on BMW and MINI engines. Reduces the chance of damage
to the injectors. Applications: BMW and Mini engine codes B36, B38, B48, B58. Supplied in storage case. Equivalent OEM numbers 2 358 417
and 2 358 022.
3. SPECIFICATION
Model No.: ................................................................ VS2081
Nett Weight: .................................................................. 4.3kg
4. CONTENTS
Item Part no.
1 VS2081-01
2 VS2081-02
3 VS2081-03
4 VS2081-04
5 VS2081-05
6 VS2081-SC
7 VS2081-06
© Jack Sealey Limited
PETROL FUEL INJECTION REMOVAL/
INSTALLATION KIT – BMW, MINI B36, B38, B48,
B58 ENGINES
MODEL NO:
Description
Mounts for Injectors
Threaded Sleeves
Magnetic Mounting Sleeves
Pull-Out Threads (L/H Thread)
Base Plate
Storage Case
Setting Gauge
Original Language Version
VS2081
1
2
5
7
3
4
6
fig.1
VS2081 Issue 1 12/02/25