Related Manuals for Truper COMP-60LB
Summary of Contents for Truper COMP-60LB
- Page 1 Manual Horizontal belt 15.8 gal air compressor Tank Applies for: Code Item 19005 COMP-60LB COMP-60LB Read this manual thoroughly CAUTION before using the tool.
- Page 2 IF THE COMPRESSOR DOESN´T WORK AFTER A LONG PERIOD OF INACTIVITY, deactivate the thermal switch as instructed on the label attached to the tank. If the compressor doesn't work or turn on, visit a TRUPER Authorized Service Center. ASSEMBLY the wheels and the rubber supports to keep the compressor level.
- Page 3 The construction class of the charger is: Class B. WARNING If the power cable is damaged, it must be replaced by the manufacturer or a TRUPER Service Center to prevent any risk of electric shock or significant accident. The electrical insulation of this tool is compromised by splashes or spillage of liquids during its operation.
- Page 4 A moment of distraction while using the tool can cause personal injury. Service Use safety equipment. Always wear eye protection. To maintain the tool's safety, repair it at a TRUPER Authorized Service Center using only identical replacement parts. The use of safety equipment, such as safety glasses, dust masks, slip-resistant shoes, helmets, and ear protection, in appropriate conditions significantly reduces the risk of personal injury.
- Page 5 CAUTION CHECK: If the power cord is damaged, it must be replaced by the manufacturer or a TRUPER Authorized The direction of rotation of the pumps during the initial Service Center to avoid the risk of shock or serious start-up and after any modification to electrical accidents.
- Page 6 Parts Oil fill filter plug Belt with guard Handle Overload protection Switch button Motor junction Presostato Tank pressure Crankcase gauge Motor 1/4” outlet valve Pressure switch Check valve Safety valve Oil level glass sight Handle Tank Wheels Start up Purge valve Assembly •...
- Page 7 Start up Operation and automatic start Automatic operation BEFORE CONNECTING, CHECK: Once the compressor starts, it will automatically stop and • Ensure that the power supply voltage matches the rating restart. Your compressor has a factory-set pressure switch on the compressor's specification plate. designed to halt the motor when the tank pressure •...
- Page 8 Maintenance Regular maintenance will ensure maximum efficiency over an extended period. Daily preventive maintenance OIL: Check the oil level in the crankcase and top up if necessary. If your compressor is unused daily, check the crankcase oil level before starting. Change the oil after Crankcase 500 hours of use.
- Page 9 PISTON RINGS: Inspect the sealing and oil scraper rings if the compressor consumes excessive oil. Worn rings need replacement. Always change the oil when replacing the rings or other significant components. CAUTION These adjustments should be performed at a TRUPER Authorized Service Center. ENGLISH...
- Page 10 2. Let the compressor cool for at least 5 minutes. 3. Press the thermal switch on the motor's top cover. 4. Turn the compressor back on by lifting the switch. Overload NOTE: Please visit a TRUPER Authorized Service Center if protection the unit shuts off again. Motor drive pulley...
- Page 11 • Visit the nearest TRUPER Authorized Service pistons Center. • Loose pulley or excessive axial play in • For service and repairs, visit the nearest TRUPER Knocks or rattling the motor shaft Authorized Service Center. • Carbon on top of the piston •...
- Page 12 Rust in the cylinders • Using incorrect oil • Change and use SAE-30 oil. • Compressor operated for a long time in • For service and repairs, visit the nearest TRUPER a humid environment Authorized Service Center. Excessive starts and •...
- Page 13 Notes ENGLISH...
- Page 14 Notes ENGLISH...
- Page 15 Authorized service centers In the event of any problem contacting a TRUPER Authorized Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
- Page 16 It includes transportation expenses for the product resulting from its service network compliance. Tel. 800-018-7873. Made in/Hecho en China. Importer TRUPER, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Tel. 761 782 9100.
Need help?
Do you have a question about the COMP-60LB and is the answer not in the manual?
Questions and answers