Logitech 930525-0403 - iFeel - Mouse Getting Started Manual

Logitech
Getting Started Guide
1

Important Safety Information

Before using your mouse, please read the Comfort Guidelines that come with your product.
2
Connect the Mouse
1. Connect the mouse cable to the USB port on the computer. Note that the USB
port must have sufficient power to drive the mouse.
2. You may be prompted to insert the Windows
software CD into the computer's CD-ROM drive when asked to do so, then follow
the on-screen instructions.
3
Install the Software
1. Start Windows, then insert the Logitech software CD into the computer's CD-ROM drive.
2. In order for iFeel to work on Netscape and Internet Explorer, Microsoft Internet Explorer 5.0
is needed. If it has not been installed on your system, you may be prompted to install it at this time.
3. Follow the on-screen instructions to complete software installation.
4
Troubleshooting: The Mouse Does Not Work after Installation
• The mouse cable goes into the computer's USB port only.
• Make sure your USB port is working.
• Also try unplugging then reconnecting the mouse cable to the computer while your system is turned off.
5
Read the On-Line User's Guide!
1. From the Windows
2. The manual displays automatically.
© 2000 Logitech. All Rights Reserved. Logitech, the Logitech logo, and the Logitech products referred to herein are either the trademarks or the registered
trademarks of Logitech. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear
in this manual. Information contained herein is subject to change without notice.
Part Number: 622705-0403 Rev. C
iFeel Mouse
® ™
Taskbar, select Start, Programs, Logitech
®
English
software CD. Insert the Windows
®
MouseWare
®
Español Français Português
USB Port
, then User's Guide.
®
®