Logitech 3-button Optical Wheel Mouse Getting Started Manual

Logitech
®
Getting Started Guide
1
Welcome!
Your Logitech
mouse ball. This sensor accurately scans the surface of your tabletop many times per second
for smooth and fast cursor tracking on your computer screen. You can use your Wheel Mouse
on a wide variety of surfaces. And because there are no moving parts, there is nothing to clean
or adjust.
2

Important Safety Information

Before using your mouse, please read the Comfort Guidelines that are included with your product,
or read these same guidelines on Logitech's Internet web site: www.logitech.com.
3
Connect the Mouse
1. For installation on a PS/2 mouse port,
turn off the computer. Connect the mouse
cable to the PS/2 mouse port on the computer,
then turn on your system.
2. For USB-port installation (Windows
or higher or Macintosh
Connect the mouse cable to the USB port on the computer. For Windows, you may be prompted
to insert the Windows software CD. Insert this software CD into the computer's
CD-ROM drive when asked to do so, then follow the on-screen instructions.
4
Install the Software
1. For PCs, start Windows
ROM drive, then follow the on-screen instructions. (If Autorun is not enabled, select Run
from the Start Menu on the Taskbar. Next, type D:\Setup.exe, where D: is the designation of
the CD-ROM drive.)
2. For the Macintosh
software CD into the computer's CD-ROM drive, find the Installer icon in the
appropriate language folder, double-click the icon, then follow the on-screen
instructions.
Wheel Mouse
Wheel Mouse uses a newly developed optical sensor that replaces the traditional
®
OS 8.6 or higher required) remove the PS/2 adapter.
®
, insert the Logitech
®
, start the Macintosh operating system, insert the Logitech
®
USB Port
98
®
software CD into the computer's CD-
®
PS/2 Port PS/2 Port Adapter
®
1