1. Manuals
  2. Brands
  3. NTT docomo Manuals
  4. Cell Phone
  5. SMART Series
  6. Instruction manual

NTT docomo SMART Series Instruction Manual

Hide thumbs Also See for SMART Series:
Table of Contents

Advertisement

Quick Links

Download this manual
'10.6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMART Series and is the answer not in the manual?

Questions and answers

Related Manuals for NTT docomo SMART Series

Summary of Contents for NTT docomo SMART Series

  • Page 1 ’10.6...

  • Page 2: Basic Package

    DOCOMO Basic package W-CDMA and GSM/GPRS System Thank you for purchasing “docomo SMART series SH-09B”. Before use of SH-09B, make sure that you read this manual to ensure proper operation. Explanation for operation of Battery Pack Manual SH-09B SH-09B SH23...
  • Page 3 I n t r o d u c t i o n Introduction FOMA Terminal nP.2 What You Can Do with SH-09B nP.3 Part Names and Functions nP.4 Precautions nP.6 Handling Precautions nP.13 Basic Before Use nP.16 Screen Explanation nP.20 Character Entry nP.25 Operation Sound/Screen Setting nP.27...

  • Page 4: Foma Terminal

    FOMA Terminal Because the FOMA terminal relies on radio signals, it cannot be The user hereby agrees that the user shall be solely responsible for used in places with no signal (such as tunnels, underground, or in the result of the use of SSL/TLS. Neither DOCOMO nor the certifier buildings), in places with a weak signal or outside the FOMA as listed herein makes any representation and warranty as for the security in the use of SSL/TLS.
  • Page 5 What You Can Do with SH-09B Triple Kukkiri Talk nP.37 Support Book (in Japanese only) Reduce surrounding noise and suppress echo during a Support book is a convenient function which allows you voice call to hear calls clearly. to check an operation method of function on the FOMA terminal.

  • Page 6: Part Names And Functions

    Part Names and Functions Using earphone Connection example for flat-plug earphone/ microphone with switch (sold separately) When you use an earphone which does not support external Connector connector terminal, connect with a plug adapter (sold separately). Flat-plug connector of flat-plug earphone/ microphone with switch Flat-plug earphone (sold separately)
  • Page 7 1Earpiece nCamera 2Display (nP.20) Use to shoot still pictures or moving pictures. 3i (,): i-mode/Operation guidance key (nP.23, P.47) oStrap hole 4m: Mail/Operation guidance key (nP.23, P.43) pPicture Light 5s: Start/Hands-free key (nP.37) Illuminates while shooting. 61 to 9, *, 0 and #: Dial/Character entry keys qSpeaker 7$: Multi/Quick search/VeilView key (nP.28) rmicroSD Card slot (nP.67)

  • Page 8: Table Of Contents

    Precautions Before use, read these “Precautions” carefully and use your FOMA The following symbols indicate specific directions. terminal properly. Keep this manual in a safe place for future reference. Indicates a prohibited action. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.

  • Page 9: Danger

    Handling the FOMA Use only the battery packs and If you notice anything unusual, adapters specified by NTT such as an unusual odor, terminal, battery pack, DOCOMO for use with the overheating, discoloration or adapters, and UIM (general) FOMA terminal. deformation during use, May cause fires, burns, bodily injury or electric shock.

  • Page 10: Handling The Foma Terminal

    Keep the FOMA terminal out of Do not point the illuminated Do not shine the light at anyone the reach of young children. light directly at someone’s driving a car or other vehicles. eyes. A young child may swallow components or suffer Do not use Picture Light near people’s faces.

  • Page 11: Handling Battery Pack

    If you are using electronic If you use the FOMA terminal in Caution medical equipment, contact the an automobile, contact the respective manufacturer or automobile manufacturer or Do not swing the FOMA vendor to check whether the vendor to check whether the terminal by its strap, etc.

  • Page 12: Handling Adapters

    If the battery fluid leaks, do not Danger Warning get the liquid on your skin (face, hands, etc.). Do not touch terminals with If any trouble such as a May result in loss of eyesight and harm to your metallic objects such as wires. deformation or scratches skin.

  • Page 13: Handling Uim

    Take care not to short-circuit the If the fuse in the DC adapter Handling UIM charging terminal when connected blows, always replace it with a to an outlet or cigarette lighter fuse of the specified type. Caution socket. Also, take care not to allow May cause fires, burns or electric shock.

  • Page 14: Material List

    Where a medical facility has specific instructions Material list Material/Surface PART prohibiting the carrying and use of mobile treatment phones, observe those instructions strictly. External Material/Surface If auto power on function is set to on, disable this PART connector SUS/Sn plating treatment function before turning off your mobile phone.

  • Page 15: Handling Precautions

    Handling Precautions Do not place the handset near an air General notes Notes about the FOMA conditioning vent. terminal Condensation formed due to rapid changes in Do not expose to water. temperature may cause internal corrosion The FOMA terminal, battery pack, adapter Avoid using the handset in extremely high and lead to malfunction.
  • Page 16 The FOMA terminal becomes warm during Notes about battery pack Notes about adapters using or charging but this is not a malfunction. Battery pack is a consumable product. Charge battery in areas where ambient Do not leave the camera in direct sunlight. Though usage time varies with use, change temperature is between 5°C and 35°C.

  • Page 17: Felica Reader/Writer

    Notes about UIM FeliCa reader/writer Caution Do not apply unnecessary force when The FeliCa reader/writer function in the Never use the FOMA terminal that is inserting/removing the UIM. FOMA terminal uses weak electric waves modified. Using a modified device violates Customer is responsible for malfunctions in the handling of which does not require a the Radio Law.

  • Page 18: Before Use

    Before Use Basic Operation Turn a recycle mark side Tabs Inserting UIM (FOMA card) and up, match tabs and battery pack attach the battery pack A UIM is an IC card that records personal information, such as phone numbers, etc. The FOMA terminal does not support the UIM (blue).
  • Page 19 Hold the desktop holder, flip the FOMA Charging terminal forward and lift it out when Charging by using desktop holder charging is complete Charge end sound is heard and charging LED turns off when Read the user’s guide of Desktop Holder SH33 (sold separately). charging is complete.
  • Page 20 Hold the release buttons (1) and Charging by using AC adapter horizontally remove the connector (2) Read the user’s guide of FOMA AC Adapter 01/02 (sold when charging is complete separately). Charge end sound is heard and charging LED turns off when Open the external connector terminal cover and charging is complete.
  • Page 21 Turning power on Checking your own phone number H (for at least 2 seconds) Stand-by display appears when initial settings are complete. Press H for at least 2 seconds to turn the power off. Saving your own name and image Changing screen display to English ]0/C &...

  • Page 22: Screen Explanation

    Screen Explanation Viewing display/icon Vibrator Manner mode Icon display area Public mode (Drive mode) IC card lock Restriction Hands-free Main icons Alarm Signal status Music&Video Channel program reservation (Strong b Weak) When [ ] appears, the handset is outside the UIM error service area or in a place with no signal.
  • Page 23 Checking stock icon details Displaying and operating i-Widget Stock icons appear in the stand-by display when a call is missed or a In the i-Widget screen, you can simultaneously activate multiple new mail is received. Widget Appli and display them as a list. For details on operation of i-Widget nP.60 Number of entries Message...

  • Page 24: Viewing Main Menu

    Viewing main menu Set, change or register functions from the menu screens. You can select the icon displayed on the menu to retrieve the function. Functions and designs of the custom menu differ depending on the Kisekae tool set. & Stand-by display Custom menu Basic menu...

  • Page 25: Key Operation

    Key operation Multi-guide key and operation guidance key Use to select or execute the menus displayed in the operation guidance. & & & Clear key End key Main menu displayed in the operation guidance Use to return to the previous Use to end the function being screen.

  • Page 26: Menu Operation

    Menu operation Selecting a function from submenu When [Submenu] appears in the operation guidance, functions For details on the available functions nP.76 (submenu) that can be used in the screen appear by pressing C. The operation may differ from the description in this manual &...

  • Page 27: Entering Characters

    Character Entry Entering characters Entering characters The explanations in this manual are based on method for entering Example: When entering “電話” characters in 5-touch entry method. In the character entry Switching entry modes screen, enter “でんわ” でんわ: 4 (four times)/* Switch entry modes to enter various types of characters.
  • Page 28 Entering pictograms/symbols Copying characters In the character entry screen, i In the character entry screen, move the To switch between pictograms and Deco-mail pictograms: i cursor to the start position/C/ To switch between single- and double-byte symbols: C & [Copy]/t &...

  • Page 29: Setting Keypad Sound Off

    Sound/Screen Setting Changing ring tone Setting vibrator ][Settings]/[Snd/Vibrator/ You can set the vibrator to notify you of incoming calls, mails and alarms. Manner]/[Select sound] ][Settings]/[Snd/Vibrator/ & Select an item/t Manner]/[Vibrator] Select a ring tone/i & Select an item/t Adjusting ring tone volume &...
  • Page 30 Using manner mode Changing screen setting You can set the FOMA terminal on mute. Changing stand-by display Camera shutter sound and record start/end sound are heard even ][Settings]/[Disp/LED/Power while the manner mode is set. saver]/[Stand-by settings]/[Stand-by ^# (for at least 1 second) display] ;...
  • Page 31 Changing menu item Setting Machi-chara For some of Kisekae tool, you can change the custom menu items to You can display a character in the stand-by display. other functions. ][Settings]/[Disp/LED/Power ]select an item/C/[Assign saver]/[Color/Graphic set]/ function] [Machi-chara]/[ON] & /[Yes] Select a function to assign/t Select a Machi-chara/i Machi-chara being set does not appear.

  • Page 32: Saving Power Consumption

    Changing LED for incoming calls Saving power consumption ][Settings]/[Disp/LED/Power Norm (auto bright) This is normal light setting. Brightness is saver]/[LED settings]/[Called LED] automatically adjusted. Norm (fixed bright) This is normal light setting. Brightness is fixed. & Select an item/t eco mode You can save power consumption.
  • Page 33 Changing original eco mode setting Adjusting display brightness Adjusting methods are as follows. Setting light time of display and keypad Automatic The display brightness is automatically adjusted according to the surrounding light. You can set the length of light time for each function when the FOMA terminal is not in use for a set length of time.

  • Page 34: Various Security Codes

    Lock/Security Various security codes Terminal security code (Default: 0000) If you enter the wrong terminal security code five times Some functions for convenient use of the FOMA terminal continuously, the power is turned off. require security codes. Changing terminal security code Precautions for various security codes ][Settings]/[Security]/[Change Do not use easily estimated numbers for security codes to be...

  • Page 35: Changing I-Mode Password

    [PIN1 code input set]/[ON] i-mode password (At subscription: 0000) & Enter the PIN1 code/t A four-digit “i-mode password” is required to register/delete sites in マ イメニュー (My menu), or subscribe/cancel message services and Changing PIN1 code/PIN2 code charged i-mode services (Additionally, information providers may set their own passwords).

  • Page 36: Various Lock Functions

    Various lock functions Lock Operation/Restriction function IC card lock Prevents the use of IC card functions. Lock Operation/Restriction & (for at least 1 second)/[IC Enable: function card lock]/[Yes] All lock Prevents all operations other than power on/off and & (for at least 1 second)/[IC Disable: answering calls.

  • Page 37: Incoming Call Restriction

    Incoming call restriction Resetting to default Rejecting a call with no caller ID Resetting various functions You can set the handset to reject calls with no caller ID depending on For items return to default by Reset settings nP.76 reason (User unset, Payphone, Unavailable). ][Settings]/[General settings]/ ][Settings]/[Security]/[Accept/...

  • Page 38: Resetting Data By Remote Control

    Resetting data by remote control You can initialize various data (memory in the handset/ microSD Card/UIM) in the specified FOMA terminal by manager’s request with the subscription of this function (Business mopera anshin manager). Refer to the DOCOMO website for corporations (in Japanese only) for details.
  • Page 39 Call Connect s (Phone)/i (V.phone) to make a call Making a voice/videophone call Making a call with redials/received calls Since the FOMA terminal does not have built-in camera inside, the image, which can be sent to the other party, is Chara-den, still &...

  • Page 40: Receiving A Voice/Videophone Call

    Making an international call Receiving a voice/videophone call WORLD CALL is an international calling service available from A call is received DOCOMO mobile phones. The ring tone sounds and the called LED flashes. WORLD CALL is registered when FOMA services are registered When the caller does not send a caller ID, a non-disclosure (excluding users who did not apply for WORLD CALL).

  • Page 41: Using Various Network Services

    When you cannot answer call Setting public mode (Power off) The FOMA terminal plays the message stating you cannot answer the Setting record message (voice/videophone phone when the power is off. calls) ^*25251/s If you set record message, the FOMA terminal answers a call and ;...
  • Page 42 Refer to “Mobile Phone User’s Guide [Network Services]” for details Services available for the FOMA on each network service. terminal For subscription and inquiries, contact the number listed in “General Inquiries” on the back of this manual. For weather forecast, enter the number, starting with the area code Setting Voice Mail Service of the area you want to know the weather.

  • Page 43: Using Overseas

    The FOMA terminal supports “Location notification of emergency Using overseas call”. When dialing an emergency number such as 110, 119, and 118, the information of your location (location information) is International roaming (WORLD WING) is a service that automatically notified to the agency that receives the emergency enables you to use the same FOMA terminal as you use call (e.g.
  • Page 44 Available services overseas Making a call outside your country of stay (including Japan) Communication service GSM GPRS Make a call from your country of stay to Japan or other countries. Voice call Videophone ^0 (for at least 1 second)/enter country code, area code (city code) and i-mode other party’s phone number i-mode mail...
  • Page 45 Mail You can exchange mails with other i-mode terminals and Sending Deco-mail/Decome-Anime e-mail via Internet by subscribing to i-mode service. You can attach up to ten files (pictures, moving picture Sending Deco-mail files, etc.) in total of 2 MB to a message. Also, Deco-mail is available.
  • Page 46 Sending Decome-Anime Checking received i-mode mail You can compose an expressive mail with Flash Receive i-mode mail movies using templates. The receive complete screen appears and the mail ring tone sounds. If you do not operate for approximately 30 seconds, the screen before reception reappears.

  • Page 47: Using Sms

    Sorting i-mode mail Setting Area Mail ^m/[Mail setting]/[Area Mail Set sort rules for user folders in Inbox/Outbox and sort i-mode mail and SMS automatically. setting]/[Receive setting] Multiple sort rules can be set for one folder. & Select the setting/t Select a folder/C/[Sort rules] &...

  • Page 48: Adding Entries To Phonebook

    Phonebook You can use the FOMA terminal phonebook and UIM Adding entries from redials/received calls to phonebook. phonebook Adding entries to phonebook & & (Received calls) (Redial)/q Main entry items Select a phone number/C/[Add to Icon Item Details phonebook] Name Enter a name.

  • Page 49: I-Mode/Full Browser

    i-mode/Full Browser Search i-mode enables you to use online services, such as Viewing i-mode site connection to sites and Internet. You can view sites that are not supported by i-mode as ^i/select an they appear on PCs using Full Browser. &...
  • Page 50 Switching browsers Viewing and operating sites Note that different transmission charges are incurred when Selecting a link and moving to a new screen switching between i-mode and Full Browser. & While viewing sites, select a link with Switching from i-mode to Full Browser &...

  • Page 51: Saving Site Contents

    Saving frequently viewed sites Saving site contents You can save frequently viewed sites and Internet web You can add (save) screens from your favorite sites, etc. pages as bookmarks for convenient access. as screen memos to the FOMA terminal or microSD Card. C/[Bookmark]/ While viewing sites, C/[Screen While viewing sites,...
  • Page 52 i-Channel ※ The i-Channel service is provided in Japanese. Displaying i-Channel i-Channel is a service that sends news and other information. The latest information received ^c (J) automatically is displayed in the stand-by display using a ticker. Additionally, press the i-Channel supported key to display the latest information in a list of channels.
  • Page 53 Camera Enjoy Screen layout and operations for Main key operations for shooting screen shooting screen Change settings collectively i Select image quality m Shoot by scene Camera gallery Shooting screen layout & White balance Adjust brightness & Select save destination Adjust zoom Still picture Moving picture...
  • Page 54 Shooting still pictures Confirming shot still/moving ][Camera]/[Shoot still pic] pictures When still pictures shooting is activated, the called LED Displaying shot still pictures illuminates. & to shoot ][Data box]/[My picture] & to save & [Camera] folder/select an image/t To set as stand-by display, etc.: C/[Set screen]/select an &...

  • Page 55: Shooting By Various Methods

    Shooting by various methods Function Details Setting/Starting method In the still picture shooting screen, C/[Shooting Best select photo Shoot continuously just before shutter operation. You can select and save your favorite picture. menu]/[Continuous mode]/[Best select photo] In the still picture shooting screen, C/[Shooting Strobophoto Shoot continuously and compose the combined image.
  • Page 56 1Seg About battery level Using 1Seg When recording is started with low battery level or battery level 1Seg is a service provided by TV broadcasters becomes low while recording, the message stating that recording is (broadcast stations), etc. Transmission charges are not impossible appears.

  • Page 57: Setting Channels

    Setting channels Preset channel setting Select a prefecture/district to use and save into the channel list. To watch 1Seg, set the channels first. ][1Seg]/[Channel setting] Auto channel setting Select a number to save/C/[Preset CH Select a prefecture/district to use. Broadcast station is automatically setting] searched and saved into the channel list.
  • Page 58 Screen layout and operations for Main key operations for 1Seg watching screen These key operations are for the video mode. watching screen & Select a station with UP/DOWN 1 to 9, *, 0, # Select a station with one-touch 1Seg watching screen layout operation &...

  • Page 59: Music&Video Channel

    Music Handling the music data Music&Video Channel ® ® This manual refers to Chaku-uta full and WMA (Windows Media ※ The Music&Video Channel service is provided in Japanese. Audio) files played using MUSIC Player as “music data”. Music&Video Channel is a service that set music •...

  • Page 60: Setting Programs

    Setting programs Screen layout and operations for MUSIC Player screen ][MUSIC]/[Music&Video ch]/[Set program]/[Yes] MUSIC Player screen layout Follow instructions on screen and set a program ] appears in the stand-by display 12 hours before the program distribution. Jacket image The acquisition of the program is automatically performed at Title night.
  • Page 61 Main key operations for MUSIC Player Playing music data screen ][Data box]/[MUSIC] & Pause/Play & Select music data/t Stop & Adjust volume Mute/Disable The music data previously played resumes from the position when & Play previous song/Return to the playback stopped if beginning of song [Continue] is selected.

  • Page 62: Activating I-Appli

    i-appli/i-Widget “i-appli” is software for the i-mode compatible mobile Activating i-appli phone. Download various software from i-mode sites for ][i-appli]/[Software list] more convenient use of the FOMA terminal, such as updating stock prices or weather information & Select software/t automatically, or enjoying games without connecting to the network, etc.
  • Page 63 i-motion/Movie i-motion refers to image, voice and music data. You can Playing i-motion downloaded from download i-motion to the FOMA terminal from i-motion sites compatible sites, etc. and play the downloaded i-motion. Also, you can search for i-motion compatible sites in [メ &...

  • Page 64: Osaifu-Keitai

    Osaifu-Keitai More Convenient Holding b mark over scanning devices Osaifu-Keitai/ToruCa Hold the b mark of the FOMA terminal over the scanning device to Osaifu-Keitai is a function which has built-in IC card and use as electronic money or railway tickets, or retrieve ToruCa. allows you to pay, use as coupon tickets or collect Pay attention to the following points when holding the b mark over stamps by simply holding the FOMA terminal over the...
  • Page 65 In addition to monthly usage fees of i-concier, a separate fee may be incurred depending on contents (information, i-schedule, etc.). ® “ひつじのしつじくん ” Packet transmission charges are incurred for receiving information ©NTT DOCOMO excluding some cases. & /select the & message/t Packet transmission charges are incurred for using detailed information.

  • Page 66: Convenient Tools

    Convenient Tools Using schedules Using bar code reader ][LifeKit]/[Classic schedule] You can connect to i-mode or Full Browser, compose a mail, make voice/videophone calls, compose SMS and & & /select a To check a schedule: Select a date with run i-appli with scanned text from bar codes (JAN/QR &...
  • Page 67 Other convenient tools Function name Details Setting/Starting method ][Settings]/[Disp/LED/Power Quick Stand-by Clock You can set to temporarily display the clock enlarged in the saver]/ setting stand-by display when you open the FOMA terminal. [Stand-by settings]/[Quick StdbyCLK]/[ON] Built-in dictionary You can activate the built-in dictionary of Quick search by one-touch operation from the stand-by display and search the meaning of words with the selected dictionary.

  • Page 68: Data Management

    Data Management Do not remove the microSD Card or turn off the FOMA terminal Using microSD Card immediately after inserting the microSD Card to the FOMA terminal, or while editing data on a microSD Card. Data may be damaged You can save data, such as the phonebook, mail or and operation may not work properly.
  • Page 69 Inserting/Removing microSD Card Copying data to microSD Card/FOMA terminal Insert the microSD Card with the metal terminal side turned down Example: i-motion Gently push the microSD Card in before removing. ][Data box]/[i-motion/Movie] [bｍicroSD])* * When the save destination is microSD Select i-motion/C/[Move/Copy]/ [Copy to microSD]/[Copy to the phone]...
  • Page 70 Sending and receiving data via Ir Sending and receiving data via iC communication communication 15° Infrared port 15° Approx. 20 cm or less Face the infrared ports of the receiver’s and sender’s FOMA b mark terminal each other and set the distance between them to approximately 20 cm or less.
  • Page 71 Connecting to PC By connecting the FOMA terminal and your PC, exchange WMA files and images in the microSD Card. In addition, connect to Internet and perform data communication. FOMA USB Cable with Charge Function 02 (sold separately) or FOMA USB Cable (sold separately) is required. For a data communication, installation of the FOMA communication configuration file from the accompanying CD-ROM is required.
  • Page 72 Support Others Terminal operation Troubleshooting Becomes hot while operating/charging First, check whether the software update is required. If it is required, Temperature of the FOMA terminal, battery pack, or adapter update the software (nP.73). may rise while operating or charging, or when performing If there is no improvement in problems even after checking the following –...

  • Page 73: Warranty And After-Sales Service

    Calling Warranty and After-Sales Service Calls cannot be made with the dial Warranty Make sure All lock is not set. P.34 Make sure Keypad dial lock is not set. P.34 Make sure that the warranty card is included with your FOMA terminal at Make sure self mode is not set.
  • Page 74 During the warranty period Do not peel off the model nameplate attached to the FOMA terminal. If the nameplate seal does not function as a certification, repairs may be The FOMA terminal will be repaired without charge in accordance with the terms of the warranty.
  • Page 75 If software update fails, [Rewrite failed] appears and all operations Updating software are not available. In this case, bring the FOMA terminal to a repair center that DOCOMO specifies. You can update software if the FOMA terminal software Updating software is not available overseas. need to be updated using packet transmission.
  • Page 76 Checking harmful data Displaying scanned results Displaying detected errors Delete or stop activating any data or applications that could cause operational malfunctions. These types of If you select [Detail] in the warning screen, data include data or programs that are downloaded to the error names appear.

  • Page 77: Introduction Of Options And Related Devices

    Bone conduction microphone/receiver 01 Introduction of options and related FOMA USB Cable with Charge Function 02 devices FOMA Portable Charging Adapter 01 FOMA Indoor Booster Antenna (Stand Type) Combine the FOMA terminal with various optional *1 Refer to P.18 for details on charging with an AC adapter. *2 Connect Earphone Plug Adapter for External connector terminal accessories (sold separately) for expanded personal and 01 and Earphone Plug Adapter to use these options and related...

  • Page 78: Camera Menu

    Appendix i-appli menu Menu list i-appli When settings are reset by Reset settings (nP.35), functions return to Software list default settings (marked with i-appli call logs • Some items may include functions which do not return to default i-appli setting i-appli volume settings.

  • Page 79: Settings Menu

    Camera (2/2) Mail (2/2) Shotdeco Mail setting SMS setting Cameraloupe Area Mail setting Auto save at edit Mail menu Mark read after pv Check mail set Mail (1/2) Reset mail settings Inbox Secret mail settings Compose message Address/Spam Mail Settings Outbox Settings menu Unsent messages...

  • Page 80: Phone Menu

    Settings Settings General settings Check status Phone settings In-call settings Text input setting Headset sw to call Auto power ON/OFF Incoming settings Date settings Videophone set Select language Record message Auto SW vert/horiz Set when closed USB mode setting Self mode Scanning function Femtocell setting Software update...
  • Page 81 Osaifu-Keitai menu i-concier menu Osaifu-Keitai i-concier IC card content i-concier 1Seg menu DCMX ToruCa 1Seg IC card lock IC lock(power-on) Activate 1Seg IC lock(power-off) Program guide Setting ToruCa from IC card Timer List ToruCa from 1Seg Reserve rec hist ToruCa duple check TVlink ToruCa auto read Channel setting...

  • Page 82: Music Menu

    Other functions LifeKit (1/3) Simulated call Run simulated call Select ring tone Earpiece volume Calling timing set Videophone Setting when silent Manner mode Shot memo Omakase Lock Kanji/English Grabber EmojiPlus Wellness Run i-appli Shortcut menu Check no. of steps Character Entry Chara entry/dict Register profile Settings...

  • Page 83: Main Specifications

    Main specifications Effective pixels Approx. 5.3 million pixels Recorded pixels Camera Approx. 5.0 million pixels Package (Max.) Zoom (Digital) Up to approx. 22.0× Product name SH-09B a) Continuous illumination Approx. 112 (H) × Approx. 49 (W) × b) Wavelength Size Approx.

  • Page 84: Battery Pack

    *12 When still picture, moving picture, music, melody, My Documents, ® Chaku-uta Memory Approx. 88 MB Kisekae tool, Machi-chara, Chara-den, i-appli, e-book/e-dictionary/ capacity ® Chaku-uta full e-comic, Music&Video Channel, video or ToruCa are saved, the “Chaku-uta” is a registered trademark of the Sony Music Entertainment ®...
  • Page 85 Number of saved/registered entries in the Number of applicable Data type entries to be saved/ FOMA terminal registered Number of applicable *5, 6 e-book/e-dictionary/e-comic 1,000 Data type entries to be saved/ 1Seg video registered Font (TTF) Phonebook 1,000 *1 You can save up to 50 entries in the UIM. 1Seg TVlink *2 Total number of the timers for starting and recording programs.

  • Page 86: Specific Absorption Rate (Sar) Of Mobile Phone

    Specific Absorption Rate (SAR) of NTT DOCOMO http://www.nttdocomo.co.jp/english/product/sar/ mobile phone SHARP Corporation http://www.sharp.co.jp/products/menu/phone/cellular/sar/index.html This model phone SH-09B meets the MIC’s technical regulation (in Japanese only) for exposure to radio waves. Ministry of Internal Affairs and Communications The technical regulation established permitted levels of radio frequency...
  • Page 87 3. Connect the equipment into an outlet on a circuit different from that to Declaration of Conformity which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Information Your handset is a radio transmitter and receiver. Hereby, Sharp Telecommunications of Europe Ltd, declares It is designed and manufactured not to exceed the emission limits for that this SH-09B is in compliance with the essential...
  • Page 88 “i-motion”, “i-mode”, “DCMX”, “WORLD WING”, “WORLD CALL”, Exchange and International Trade Law” and its related laws) will “OFFICEED”, “2in1”, “docomo SMART series”, the “i-mode” logo, the be applied to this product and its accessories under certain “FOMA” logo, the “i-appli” logo are trademarks or registered trademarks conditions.
  • Page 89 ™ Powered by JBlend Copyright 2002-2009 Aplix Corporation. This product includes a face recognition engine All rights reserved. FSE (Face Sensing Engine) provided by Oki JBlend and JBlend related trademarks are registered Electric Industry Co., Ltd. trademarks or trademarks of Aplix Corporation in Japan and FSE and the FSE Logo are trademarks of Oki Electric Industry Co., Ltd.
  • Page 90 ® ® ® This product is licensed under the MPEG-4 Systems Patent Portfolio Contains Adobe Flash Lite ® License for encoding in compliance with the MPEG-4 Systems Standard. Adobe Reader Mobile technology by An additional license and payment of royalties are necessary in the Adobe Systems Incorporated following cases.
  • Page 91 Content owners use Windows Media digital rights management Internet dictionary embedded in this product uses the BSD license. (WMDRM) technology to protect their intellectual property, including Copyright © 2002,2003, Stefan Haustein, Oberhausen, Rhld., Germany copyrights. This device uses WMDRM software to access All rights reserved WMDRM-protected contents.
  • Page 92 Index Numerics Brightness......31 Display shot still pictures ....52 Display/Icon.
  • Page 93 i-appli ......60 Light/Power saver ....30 Network security code .
  • Page 94 PUK (PIN Unlock Key) ....33 Security Scan (Scanning function) ..74 Triple Kukkiri Talk ....37 Select a link .
  • Page 95 Check/Change the subscription, apply for various services, and request various information materials online. From i-mode iMenu/お客様サポート (user support)/お申込 ・ お手続き (Applications/Procedures)/各種お申込 ・ お 手続き (Various Applications/Procedures) Packet communication charges free (in Japanese only) My docomo (http://www.mydocomo.com/)/各種お申込 ・ お手続き (Various Applications/Procedures) From a PC (in Japanese only) ※...
  • Page 96 ’10.6 (1st Edition) 10F MS96 ...

  • Page 97: Manual For Pc Connection

    SH-09B Manual for PC Connection Data communication............1 Before using data communication .

  • Page 98: Data Communication

    Data communication Data communication available for the FOMA terminal The FOMA terminal communication formats fall into three categories: packet transmission, 64K data communication and data transfer. The FOMA terminal does not support fax transmissions. The FOMA terminal supports data communication with sigmarionⅢ. The high-speed communication for FOMA HIGH-SPEED area is not supported.

  • Page 99: Before Using Data Communication

    Things to keep in mind Internet service provider fees ■ When using the Internet, usage fees are charged by the Internet service provider. These usage fees, paid to the Internet service provider, are separate from the FOMA service fee. Contact your Internet service provider for more information about usage fees.

  • Page 100: Flow Of Setup For Data Transfer (Obex ™ Communication)

    Take the steps below when menus do not appear even if the CD-ROM is set. For Windows 7 In the [スタート] (Start) menu of Windows, specify [<CD-ROM drive name>:index.html] in the [プログラムと ファイルの検索] (Program and file search) field and click [index.html] displayed in the search result field. For Windows Vista In the [スタート] (Start) menu of Windows, specify [<CD-ROM drive name>:index.html] in the [検索の開始] (Start search) field and click [index.html] displayed in the search result field.

  • Page 101: Flow Of Setup For Data Communication

    Flow of setup for data communication This section describes the preparation required to connect the FOMA terminal to your PC, and use a packet transmission and 64K data communication. The flow is as shown below. Download and install the FOMA communication configuration file Install from the accompanying CD-ROM (nP.

  • Page 102: Connecting Up Pc To The Foma Terminal

    Connecting up PC to the FOMA terminal Connect the FOMA terminal to your PC with both devices turned on. If the FOMA communication configuration file is already installed, [x] appears on the FOMA terminal screen. If the FOMA communication configuration file is not installed, install the file before connecting the FOMA terminal to the PC (nP.

  • Page 103: Installing Foma Communication Configuration File

    Installing FOMA communication configuration file To make data communication by connecting the FOMA terminal to a PC via FOMA USB Cable with Charge Function 02 (sold separately), the FOMA communication configuration file is required. End all resident software before the FOMA communication configuration file (Driver) is installed. Installing FOMA communication configuration file (Driver) Install on the PC using a user with administrator rights.
  • Page 104 Double-click [SH_Setup.exe]. For Windows Vista and Windows XP Double-click [SH09Bs.exe] and proceed to step 6. Make sure that [セットアップ後ドライバインストールを開始する。 ] (Start installing driver after setup.) shows E and click [セットアップ開始] (Start setting up). : When H appears instead, change to E. When the setup complete screen appears, click [OK].
  • Page 105 Confirming installed FOMA communication configuration file (Driver) If the FOMA terminal is not properly recognized by the PC, setup and communications are not possible. Example: Confirming Windows 7 drivers The screens are different for Windows Vista and Windows XP. Click [スタート] (Start) menu/[コントロールパネル] (Control panel) and click [システムとセキュリティ] (System and security).
  • Page 106 Uninstalling FOMA communication configuration file (Driver) This section describes how to uninstall the FOMA communication configuration file. When uninstalling the FOMA communication configuration file, the PC user must have administrator rights. An error will occur when other users attempt to uninstall this software. Contact the computer manufacturer or Microsoft Corporation for information about configuring the administrator rights setting.

  • Page 107: Set Network Transmission With Docomo Connection Manager

    Perform steps 1 and 2 of “Installing FOMA communication configuration file (Driver)” on P. 6. Double-click [SH_DeleteMetadata.exe]. Click [削除開始] (Start deleting). When the uninstall complete screen appears, click [OK]. : Deletion of the device metadata finishes. When [プログラム互換性アシスタント] (Program Compatibility Assistant) appears, click [このプログラムは正しくイ ンストールされました] (This program installed correctly).
  • Page 108 Before installing DOCOMO Connection Manager Installation flow ■ STEP１ Setup preparation Prepare the FOMA terminal and the FOMA USB Cable with Charge Function 02 (sold separately) or the FOMA USB Cable (sold separately). STEP２ Confirming the content of subscription Confirm the content of subscription to the service and Internet service provider. STEP３...
  • Page 109 Installing DOCOMO Connection Manager Example: Installing to Windows 7 The screens are different for Windows Vista and Windows XP. Insert the accompanying CD-ROM into your PC. : The initial screen appears. Click [インターネット接続] (Internet connection)/[インストール] (Install) of [③ドコモ コネクションマネージャのイン ストール] (③ Install DOCOMO Connection Manager) in the [本CD-ROM からのFOMAデータ通信の設定方法] (Setting method for FOMA data...
  • Page 110 Click [はい] (Yes). For Windows Vista Click [続行] (Continue). For Windows XP : User Account Control screen does not appear. The setup program is activated soon. Click [次へ] (Next). Confirm the content and click [次へ] (Next). : The precaution appears. Make sure to confirm its content.
  • Page 111 Read the licensing agreement and select [使用許諾契約の条項に同意します] (Agree to articles of the user licensing agreement) and then click [次へ] (Next) to agree. : This is the user licensing agreement for DOCOMO Connection Manager. Click [キャンセル] (Cancel) to cancel the installation. Confirm the destination program folder and click [次へ] (Next).
  • Page 112 Wireless LAN API. Restart Windows after installation of MSXML6 and Wireless LAN API is completed, then installation of DOCOMO Connection Manager automatically begins. Activating DOCOMO Connection Manager Select [スタート] (Start) menu/ [NTT DOCOMO]/[ドコモ コネク ションマネージャ] (DOCOMO Connection Manager)/[ドコモ コ ネクションマネージャ] (DOCOMO Connection Manager).

  • Page 113: Set Network Transmission Without Using Docomo Connection Manager

    Set network transmission without using DOCOMO Connection Manager Setting communications for packet transmission and 64K data communication This section describes how to set up packet transmission and 64K data communication without using DOCOMO Connection Manager. To make the settings, communication software for entering AT commands are required. “Hyper terminal” is used here.
  • Page 114 Enter a name (such as a host name) in the [名前] (Name) field and click [OK]. : The advanced settings screen for phone number appears. Select [FOMA SH09B] from [接続方法] (Connection method), enter a temporary number in the [電話番号] (Phone number) field that does not actually exist (such as [0]), and click [OK].
  • Page 115 When confirming APN settings using AT commands : AT+CGDCONT?o Refer to P. 31 for details on AT commands. Confirm that [OK] appears and select [ハイパーターミナルの終了] (Exit hyper terminal) from the [ファイル] (File) menu. : Hyper terminal ends. : [セッション×××を保存しますか？] (Save session xxx?) appears.
  • Page 116 Send/Not send setting on dial-up networks ■ Adding “186” (Send) and “184” (Not send) to the host number in dial-up networks is also possible. Setting “186” (Send) and “184” (Not send) in both the *DGPIR command setting and the dial-up network setting results in the following.
  • Page 117 For Windows Vista Click [スタート] (Start) menu/[接続先] (Connect to) and proceed to step 4. Click [ネットワークとインターネット] (Network and Internet). Click [ネットワークと共有センター] (Network and sharing center). : The connect to a network screen appears. Click [新しい接続またはネットワークのセットアップ] (Set up new connection or network). : The connect to a network screen appears.
  • Page 118 Click [ネットワークと共有センター] (Network and sharing center)/[アダプター の設定の変更] (Change adapter setting) in [タスク] (Task). : The network connections screen appears. Select and right-click the icon for host created and select [プロパティ] (Properties). : Properties screen appears. Confirm all the settings in the [全般] (General) tab.
  • Page 119 Setting a dial-up network on Windows XP ■ On Windows XP, use “ネットワークの接続ウィザード” (Network connection wizard) to set both the host (APN) and TCP/IP protocol. Example: Using <cid>=3 to connect to mopera U, the DOCOMO Internet connection service Subscription to mopera U requires a charge. Click [スタート] (Start) menu/[すべてのプログラム] (All programs)/[アクセサ...
  • Page 120 Set options as shown in the example screen and click [次へ] (Next). : The new connection wizard complete screen appears. : When using mopera U or mopera, [ユーザー名] (User name) and [パスワード] (Password) can be left blank to connect. : When connecting to the Internet using a provider other than mopera U or mopera, enter the user name and password for the provider in the [ユーザー...
  • Page 121 Check all options to show H and click [OK]. : Properties screen of the host reappears. Click [OK] on the [プロパティ] (Properties) screen. : The host and TCP/IP protocol are set. : Refer to P. 24 for details on connecting to dial-up network. Connecting to dial-up network Example: Connecting to the dial-up network via FOMA USB Cable with Charge Function 02 on Windows 7 The screens are different for Windows Vista and Windows XP.
  • Page 122 Confirm the settings and click [ダイヤル] (Dial-up). : The FOMA is connected to the host. : The phone number set in “Setting dial-up network” (nP. 19) appears in the [ダイヤル] (Dial-up) field. : When using mopera U or mopera, [ユーザー名] (User name) and [パスワード] (Password) can be left blank to connect.

  • Page 123: Sending And Receiving Data (Obex ™ Communication)

    ™ Sending and receiving data (OBEX communication) Sending/Receiving FOMA terminal data to/from a PC The FOMA terminal has OBEX ™ function as a data communication protocol. Connect the FOMA terminal to your PC via FOMA USB Cable with Charge Function 02 (sold separately), and the data communication (data communication with OBEX ™...
  • Page 124 Sending single data item (Write 1) Send data from a PC to a FOMA terminal one item at a time. Sending one item at a time from a FOMA terminal to a PC is not possible. Data transfer operating methods differ depending on the software used. Refer to the software manual for details.

  • Page 125: List Of At Command

    List of AT command AT commands AT commands are commands used to set the FOMA terminal functions from a PC. When AT commands are entered from a PC, the FOMA terminal performs the corresponding operations. AT command input format ■ AT commands must always start with “AT”.
  • Page 126 List of AT command [M]: AT commands that can be used with the FOMA SH09B Modem Port. Execution AT command Overview Parameter/Explanation example The modem function of the FOMA terminal can be controlled by adding commands in the ― list to the end of this command. ※...
  • Page 127 Execution AT command Overview Parameter/Explanation example AT*DGAPL=<n> Sets host (APN) to accept Adds or deletes from Accept calls list with <n> AT*DGAPL=0,1o [,<cid>] transmissions for incoming packet parameter. If <cid> parameter is abbreviated, communications. APN settings adds (<n>=0) or deletes (<n>=1) all of <cid> AT*DGAPL?o use <cid>...
  • Page 128 Execution AT command Overview Parameter/Explanation example AT+CBC Inquires the battery status. The result from this command is in the AT+CBCo following format. +CBC:0,80 +CBC:<bcs>,<bcl> <bcs> 0 : The battery operates the FOMA terminal 1 : Charging the battery 2 : The battery is unconnected 3 : Reducing the power <bcl>...
  • Page 129 Execution AT command Overview Parameter/Explanation example AT+CLIP=<n> Shows PC calling number when <n> AT+CLIP=0o receiving 64K data 0 : Does not output results (default setting) communication. 1 : Outputs results Displays +CLIP:<n>,<m> for “AT+CLIP?”. AT+CLIP?o <m> +CLIP:0,1 0 : NW setting to not send own number during transmissions 1 : NW setting to send own number during transmissions...
  • Page 130 Execution AT command Overview Parameter/Explanation example AT+COPS=[<m Selects a telecommunications <mode> AT+COPS ode>[,<format>[ carrier to be connected. 0 : Auto (Automatically searches network and =1,2,“44F001” ,<oper>]]] switch telecommunications carriers) 1 : Manual (Connects to the telecommunications carrier specified in <oper>) 2 : Cancels (disconnects) the connection to (Connects to the telecommunications carrier...
  • Page 131 Execution AT command Overview Parameter/Explanation example AT+CR=<mode> Sets whether to display packet <mode> AT+CR=1o transmission/64K data 0 : Does not display when line is connected communication before (default setting) ATD*99***1# “CONNECT” result code is 1 : Displays when line is connected +CR:GPRS displayed during line connection.
  • Page 132 +++ (Does not appear) ― ATHo NO CARRIER ATI<n> Displays the verification code. n=0 : NTT DoCoMo ATI0o n=1 : Displays abbreviated product name NTT DoCoMo (FOMA SH09B) n=2 : Displays the product version in a format such as “VerX.XX”...
  • Page 133 Execution AT command Overview Parameter/Explanation example Returns to online data mode from ATOo online command mode during CONNECT ― communication. ATQ<n> Sets whether to display result n=0 : Displays result codes (default setting) ATQ0o codes. n=1 : Does not display result codes ATV<n>...
  • Page 134 Execution AT command Overview Parameter/Explanation example ATS5=<n> Sets the backspace (BS) When detected while entering an AT ATS5=8o character. command, the last character in the input buffer is deleted. The settings cannot be ATS5?o changed (default setting: n=8). ATS6=<n> Sets pause time (seconds) until Sets a register, but has no other effect.
  • Page 135 Reasons for disconnection Packet transmission ■ Value Reason Host (APN) does not exist, or was incorrect. Disconnected by network. No packet transmission subscription. Disconnected properly. 64K data communication ■ Value Reason Specified number does not exist. Disconnected properly. Line busy. Number was dialed, but no response received within specified time.
  • Page 136 Operation when parameter is abbreviated AT+CGDCONT= Clears all <cid> settings. Resets <cid>=1 or 3 setting to default value. AT+CGDCONT=<cid> Clears specified <cid> setting. Resets <cid>=1 or 3 setting to default value. AT+CGDCONT=? Displays list of values that can be set. AT+CGDCONT? Displays current settings.
  • Page 137 Command name: +CGEQREQ=[parameter] ■ Overview Sets QoS (Quality of Service) required of the network when establishing PPP packet transmission. Not stored in FOMA terminal’s memory with AT&W commands. Not reset with AT&F or ATZ commands. Syntax AT+CGEQREQ=[<cid> [,<Traffic class> [,<Maximum bitrate UL> [,<Maximum bitrate DL> [,,,,<Maximum SDU size>]]]]]o Parameter description This setting is assigned to each cid by default value.
  • Page 138 Numerical display Text display Meaning NO ANSWER Connection completed. The server connection timed out. RESTRICTION Network restricted. DELAYED Redial restricted. Extended result codes ■ Numerical display Text display Meaning CONNECT 1200 FOMA terminal and PC connected at 1,200 bps. CONNECT 2400 FOMA terminal and PC connected at 2,400 bps.

  • Page 139: Kuten Code List

    Kuten Code List ’10.6 (1st Edition)
  • Page 140 Use four-digit kuten codes to enter kanji, hiragana, katakana, symbol, and alphanumeric characters. Each kuten code corresponds to a particular character. Refer to “Inputting Kuten Code” of the user’s guide for details. If an unregistered kuten code is entered, either a space or nothing will be entered. Some entries in the kuten code list may differ from on the screen.
  • Page 141 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 肩...
  • Page 142 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 枠...
  • Page 143 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 浚...

This manual is also suitable for:

Smart sh-09b

Table of Contents