Download
Share
Print this page
  1. Manuals
  2. Brands
  3. TOLSEN TOOLS Manuals
  4. Power Tool
  5. 87239
  6. Instruction manual

TOLSEN TOOLS 87239 Instruction Manual

Mp 20v li-ion cordless combo kit
Hide thumbs

Advertisement

Quick Links

Download this manual
87239
LI-ION CORDLESS COMBO KIT
INSTRUCTION MANUAL
SAVE THIS MANUAL !
You will need this manual for safety instructions, operating procedures and warranty.
Put it and the original sales receipt in a safe dry place for future reference.
20V
LITHIUM-ION
LITHIUM-ION

Advertisement

loading
Need help?

Need help?

Do you have a question about the 87239 and is the answer not in the manual?

Questions and answers

Related Manuals for TOLSEN TOOLS 87239

Summary of Contents for TOLSEN TOOLS 87239

  • Page 1 87239 LI-ION CORDLESS COMBO KIT INSTRUCTION MANUAL LITHIUM-ION LITHIUM-ION SAVE THIS MANUAL ! You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.

  • Page 2: Important Safety Information

    SAFETY IMPORTANT SAFETY INFORMATION General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING: This appliance is not intended for use by persons (including children) with reduced, physical or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  • Page 3: Personal Safety

    SAFETY Personal safety 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Page 4 SAFETY Battery Tool Use and Care 1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 2. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

  • Page 5: Impact Driver Safety Warnings

    SAFETY Additional Safety for Battery-Operated Drills WARNING: Important: It is imperative to follow all national safety regulations concerning installation, operation and maintenance. 1. DO NOT allow anyone under the age of 18 years to use this tool, and ensure that operators are qualified and familiar with the operating and safety instructions.

  • Page 6: Battery Charger Safety

    SAFETY Battery Safety WARNING This battery can only be used in the machines included in the TOLSEN MP20V lithium-ion power platform system. This battery can only be used cooperatively with the designated battery charger. Li-lon batteries, if incorrectly used, stored or charged will cause a fire, burn and explosion hazard. Failure to follow these instructions may cause overheating or fire.

  • Page 7: Before Use

    SAFETY Before Use Removing a battery Remove the Battery from the tool by pressing the lock button, then slide the Battery out of the Battery Slot. WARNING: DO NOT try to remove the Battery without pressing the lock button. The tool or Battery could be damaged. Fitting a battery 1.
  • Page 8 SAFETY Note: Symbology Class II Double insulated for additional protection CE conformity Read the instruction manual before using Wear hearing protection while operating the tool Wear hand protection Always use breathing apparatus when machining materials which generate dust. Wear ear protection. Operating environmental temperature Max 45 º...

  • Page 9: Specifications

    SETUP SPECIFICATIONS Li-ion cordless drill(87211) Rated Voltage 20VDC No-load Speed 0-400/0-1500min Chuck Capacity 10mm (3/8”) Torque Max. 35N m (310in.lbs.) Max. Drilling Capacity steel 10mm (3/8”) Max. Drilling Capacity Wood 25mm (1”) Li-ion cordless impact driver(87220) Voltage Chuck type 1/4" Hex No-load speed 0-2900 min Impact rate...
  • Page 10 SETUP FUNCTIONS Gear switch Torque selector Drill chuck Motor vents So grip handle Direction switch (forward/reverse) Trigger switch Work light Lock button Belt Clip Collar Hex Bit Battery pack Electricity indicator Motor Vents Direction switch (forward/reverse) Trigger Switch So Grip Handle Work light Belt Clip...

  • Page 11: Direction Control

    SETUP OPERATING INSTRUCTIONS(CORDLESS DRILL) Fitting drill bits and accessories WARNING: ALWAYS remove the Battery from the drill before attaching, adjusting or removing accessories. WARNING: DO NOT attempt to tighten drill bits (or any other accessory) by gripping the front part of the chuck and switching the tool on.

  • Page 12: Switching On/Off

    SETUP Switching on/off WARNING: ALWAYS wear adequate personal protection equipment when setting up and operating this machine. 1. To start the drill, squeeze the Trigger Switch 2. The built-in Work Light will illuminate when the Trigger Switch is squeezed Note: If the Trigger Switch cannot be pressed down, check if Forward/Reverse switch is set to its middle position, which locks the device (see 'Direction control').

  • Page 13: Battery Charging

    SETUP OPERATING INSTRUCTIONS(CORDLESS IMPACT DRIVER) OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up WARNING TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section.
  • Page 14 SETUP General Operating Instructions 1. Make sure that the Trigger Switch is in the off-position, then attach the Battery Pack. 2. Insert an appropriate impact-rated accessory into the driver. 3. Set Direction Switch. Forward: Push Switch in on right side (arrow pointing forward) for clockwise rotation. Reverse: Push Switch in on le side (arrow pointing backward) for counter-clockwise rotation.

  • Page 15: Maintenance

    MAINTENANCE MAINTENANCE WARNING: ALWAYS disconnect from the mains power supply, before carrying out any maintenance/ cleaning of the charger. Remove the battery before carrying out any maintenance/ cleaning of the tool. Note: Both the tool and the charger contain no user-serviceable parts. If the device does not perform as outlined in this manual, return it to an authorised service centre for repair General inspection - Regularly check that all the fixing screws are tight...

  • Page 16: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING problem possible causes Likely Solutions Tool will not 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are no start. obstructions, clean battery contacts on tool, connected. reinsert the Battery Pack according to its shape 2.

  • Page 17: Ce Declaration Of Conformity

    CE DECLARATION OF CONFORMITY SUZHOU TOLSEN TOOLS CO.,LTD. 198 HUASHAN ROAD, ZHANGJIAGANG, JIANGSU, CHINA Declare that the product 87211 LI-ION CORDLESS DRILL Complies with the essential health and safety requirements of the following Directices: council directive 2006/42/EC Standards and technical specifications referred to:...
  • Page 18 CE DECLARATION OF CONFORMITY SUZHOU TOLSEN TOOLS CO.,LTD. 198 HUASHAN ROAD, ZHANGJIAGANG, JIANGSU, CHINA Declare that the product 87220 LI-ION CORDLESS IMPACT DRIVER Complies with the essential health and safety requirements of the following Directices: council directive 2006/42/EC Standards and technical specifications referred to:...
  • Page 19 SUZHOU TOLSEN TOOLS CO.,LTD. www.tolsentools.com TOLSEN is a trademark or registered trademark of TOLSEN TOOLS. All rights reserved. SCAN TO VISIT TolsenWorld MADE IN CHINA PRODUCT LINK...