Dynex DX-CRD12 - 174; Internal USB 2.0 Multiformat Media Card Reader User Manual page 5

Card reader components
Feature
LED
CF/MD slot
Note: The arrow shows the direction you
insert the card into the slot.
MS/MS-DUO slot
Note: The arrow shows the direction you
insert the card into the slot.
T-Flash slot
Note: The arrow shows the direction you
insert the card into the slot.
Description
Indicates when a slot is reading from or
writing to a card.
LED off–Your card reader is not being used.
LED on–A card is inserted in one of the slots.
LED flashing–Data is being transferred to or
from a card and the hard drive or another
card.
Insert Compact Flash (type I/II), IBM
Microdrive, or Magicstor cards into this slot.
Insert Sony memory sticks or MS-Pro or
MS-DUO memory cards into this slot.
Insert Transflash or Micro SD memory cards
into this slot. No adapter is required.
Note: The T-flash slot and signal bus are
shared with the SD/MMC slot which means
that you cannot use both slots at the same
time.
5