Bluetooth Tethering - Motorola razr ultra 2025 User Manual

Connect through Bluetooth
Turn on and connect devices
Find it: Swipe up from the home screen and tap
Connected devices > Pair new device
You can also open Bluetooth settings by touching and holding
or in Quick Settings.
Note: If Bluetooth is not on, it will turn on to pair a new or previously
connected device.
1 Make sure the device you are pairing with is in discoverable mode (for
details, refer to the guide that came with the device).
2 Swipe up from the home screen and tap
devices > Pair new device.
3 Tap a found device to connect it. Tap
be used for. You can tap
the device.
Tip: To automatically disconnect or reconnect a device, just turn the
connected device off or on.
Note: Using a mobile device or accessory while driving may cause
distraction and may be illegal. Always obey the laws and drive safely.
Share files using Bluetooth
» Photos or videos: Open the photo or video, then tap
» Contacts: Swipe up from the home screen and tap
and hold a contact, then tap

Bluetooth tethering

To share your phone's internet connection via Bluetooth, swipe up from the
home screen and tap
tethering > Bluetooth tethering.
Connect with Smart Connect
Seamlessly connect your phone with your PC, Android tablet, monitorTV, or
wearables via Smart Connect.
Find it: Swipe up from the home screen and tap the Moto folder >
Smart Connect
Or swipe up from the home screen and tap
devices > Smart Connect.
next to a saved device and tap
Settings > Network & internet > Hotspot &
— Connect, share, pay & sync
Settings > Connected
and choose what the device will
> Bluetooth.
Settings > Connected
Settings >
Bluetooth
to rename
> Bluetooth.
Contacts. Touch
I 106 —