Page 1
USER MANUAL M2R WARRIOR INSIDE THE BOX M2R Warrior, 18650 (3500mAh) Lithium battery, USB Magnetic Charging Cable, Holster, Lanyard, User Manual SPECIFICATIONS Material: AL6061-T6 aluminum alloy unibody design with MilSpec Type-Ⅲ hard anodizing, along with blue bezel ring and stainless clamping ring on the switch.
Page 2
CHARGING Charge the flashlight before use. Connect the USB end of the magnetic charging cable to an external USB power source (USB power source is not included in the package. Users can charge it through any USB power source such as a computer or wall adapter) and attach the other end to the tail cap of the flashlight.
(EN)English HOW TO OPERATE SIDE SWITCH ON/OFF: Single click the side switch to turn the light ON/OFF. When the light is turned on again, it will return to the previously memorized mode. CHANGE BRIGHTNESS LEVEL: When the flashlight is on, press and hold the side switch and it will, starting from the present brightness level, automatically cycle through low, med2, med1, and high mode.
Page 4
DANGER Do not throw the light directly into human eyes. This may cause temporary blindness, or permanent damage to the eyes. DO NOT use Non-protected rechargeable batteries. WARNING DO NOT activate turbo mode repeatedly under high temperature to prevent the flashlight body from overheating and hurting the user’s hand. The tail switch may not work while immersed in sea water or other conductive media.
Within 30 days of purchase: Return to retailer from which you purchased for repair or replacement. Within 5 years of purchase: Return to Olight for repair or replacement. This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.
Need help?
Do you have a question about the M2R WARRIOR and is the answer not in the manual?
Questions and answers