Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Spypoint LM2
Summary of Contents for Spypoint LM2
- Page 1 Quick Start Guide v1.0...
-
Page 2: Installation
IN THE BOX SIM CARD Preactivated and Camera inserted in the camera INSTALLATION ANTENNA Strap REQUIRED (sold separately) 8 AA Lithium non-rechargeable MEMORY CARD recommended 2 to 32 GB class 10 ultra-high speed new microSD card LIT-10 Rechargeable Lithium Battery Pack... - Page 3 BEFORE YOU GO TO THE FIELD — Getting ready, first time use Format your memory card Long format your microSD card using a computer with an integrated microSD card slot or USB SD card reader. Create an account on spypoint.com/activate...
- Page 4 Download the SPYPOINT app and sign in. In the Cameras tab, press the button. Follow the instructions on the screen to add your camera.
- Page 5 Screw in antenna & insert memory card, batteries. Fill both sides of battery tray and insert following arrow orientation.
- Page 6 Turn your camera ON. STATUS light will flash red, orange, green green times then while searching for signal (can take several minutes). STATUS light will indicate signal strength = Good = Fair = Weak or = No signal If red, move camera to a new location and repeat step 6.
- Page 7 Test your camera With the battery door open, move in front of the device. STATUS light will turn green then orange. Once the STATUS light turns OFF, check your app to ensure the photo has been received. Turn your camera Off until you’re ready to install it in the field.
-
Page 8: In The Field
IN THE FIELD Install your camera. 25 ft (7.5 m) Turn your camera ON & test it. (Steps 6 & 7) - Page 9 COMPONENTS Antenna Slot for installation strap Detection lens Door microSD card slot Locking latch Light sensor Cable lock hole Delay light 12 V jack Photo lens Screw-thread for standard ¼”-20 tripod mount Antenna O-Ring OFF/ON switch STATUS light SIM card slot Battery compartment...
- Page 13 Scan for detailed instructions, LED light pattern descriptions, complete user manual & other helpful information. spypoint.com/LM2-guide Need assistance? Just contact us! spypoint.com/support • 1-888-779-7646...
- Page 14 DISPOSAL Only use original spare parts and accessories. If, one day, your camera has been used so intensively that it has to be replaced, or if you no longer have any use for it, you are obliged to dispose of it at a recycling center. Information on return points for your electrical appliance can be obtained from your local waste disposal company or from your local administrative offices.
-
Page 15: Warranty
FREQUENCY Details available on the LM2 help web page (spypoint.com/LM2-guide) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device must not cause harmful interference. 2. This device must accept any interference received, includ- ing interference that may cause undesired operation. - Page 16 V models FCC ID: XMR201609EC21V • IC ID: N/A Distribution Center 3000 Gannett Avenue, Des Moines IA 50321 • USA SPYPOINT 330 de la Jacques-Cartier, Victoriaville QC G6T 1Y3 • Canada EUROHUNT GmbH Harzblick 25,99768 Harztor OT Ilfeld • Germany...
Need help?
Do you have a question about the LM2 and is the answer not in the manual?
Questions and answers