Page 1
Datalogic S.p.A. and/or its affiliates • Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.
OUT OF THE BOX The Memor 11 package contains: y Memor 11 PDA y Rechargeable one-piece battery pack y USB Type-C cable y Handstrap y Quick Start Guide y Safety & Regulatory Addendum y End User License Agreement (EULA) Sheet Remove all the components from their packaging;...
Top View Data Capture Window Side View Power Button Volume Control Buttons Left Trigger Right Trigger USB Type-C Port BATTERY INSTALLATION 1. Rotate the latches to the open position: 2. Insert the battery pack into the slot, bottom first, and press it into place: 3.
94ACC0196) to charge the device from a power outlet. The charger is modular, with one adapter and five switchover plugs. You can also use the USB cable to charge the Memor 11 from any self-powered USB hub or USB port on a computer.
NOTE: The Memor 11 may get warm during charging. This is normal and does not mean a malfunction. INSTALL THE SIM CARD 1. Turn off the Memor 11 or put it in swap battery mode (refer to the User’s Manual for more details). 2. Remove the battery pack (see “Battery...
Page 6
SCANNING AND IMAGING Models with Laser Aiming System To scan a barcode symbol: 1. Point the scan window at the barcode from a distance within the reading range. 2. Press one of the scan triggers. The imager projects a laser aiming pattern similar to those used on cameras.
Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publi- cations, please let us know via the "Contact" page.
Need help?
Do you have a question about the MEMOR 11 and is the answer not in the manual?
Questions and answers