Red Hat NETWORK SATELLITE 5.1.1 Reference Manual page 54

Chapter 5. Red Hat Network Registration Client
Figure 5.1. Red Hat Network Registration Client Configuration
To start the command line version, use the command:
rhn_register --nox --configure
It has more configuration options than the graphical version.
You will be presented with a list of options and their current values:
0. enableProxyAuth No 1. noSSLServerURL http://xmlrpc.rhn.redhat.com/
XMLRPC 2. oemInfoFile /etc/sysconfig/rhn/oeminfo 3. enableProxy No
4. networkSetup Yes 5. httpProxy 6. proxyUser 7. serverURL https://
xmlrpc.rhn.redhat.com/XMLRPC 8. proxyPassword 9. debug No Enter number of
item to edit <return to exit, q to quit without saving>:
Enter the number of the item to modify and enter a new value for the option. When finished changing
your configuration, press Enter to save your changes and exit. Press q and then Enter to quit
without saving your changes.
The most common options configured are enableProxy and httpProxy to enable a proxy
server. To enable a proxy server, change the value for enableProxy to Yes and the value of
httpProxy to the name of the proxy server and port number in the format HOST:PORT. For
example, to use the proxy server squid.mysite.org on port 3128, you would change the value to
squid.mysite.org:3128.
42