C.5.3. Linux::disk Usage; C.5.4. Linux::inodes - Red Hat NETWORK SATELLITE 5.1.1 Reference Manual

Requirements — The Red Hat Network Monitoring Daemon (rhnmd) must be running on the
monitored system to execute this probe. Also, the Disk number or disk name parameter must match
the format visible when the iostat command is run. If the format is not identical, the configured
probe enters an UNKNOWN state.
Field
Disk number or disk name*
Timeout*
Critical Maximum KB read/second
Warning Maximum KB read/second
Warning Minimum KB read/second
Critical Minimum KB read/second
Critical Maximum KB written/second
Warning Maximum KB written/second
Warning Minimum KB written/second
Critical Minimum KB written/second
Table C.16. Linux::Disk IO Throughput settings

C.5.3. Linux::Disk Usage

The Linux::Disk Usage probe monitors the disk space on a specific file system and collects the
following metrics:
• File System Used — The percentage of the file system currently in use.
• Space Used — The amount of the file system in megabytes currently in use.
• Space Available — The amount of the file system in megabytes currently available.
Requirements — The Red Hat Network Monitoring Daemon (rhnmd) must be running on the
monitored system to execute this probe.
Field
File system*
Timeout*
Critical Maximum File System Percent Used
Warning Maximum File System Percent Used
Critical Maximum Space Used
Warning Maximum Space Used
Warning Minimum Space Available
Critical Minimum Space Available
Table C.17. Linux::Disk Usage settings

C.5.4. Linux::Inodes

The Linux::Inodes probe monitors the specified file system and collects the following metric:
Value
0
15
Value
/dev/hda1
15
Linux::Disk Usage
213