Registration - Red Hat NETWORK SATELLITE 5.1.1 Reference Manual

Chapter 2. Red Hat Update Agent

2.2. Registration

Before you begin using Red Hat Network, you must create a username, password, and System
Profile. Upon launch, the Red Hat Update Agent senses whether these tasks have been
accomplished. If not, it guides you through the registration process.
If you ever need to force the Red Hat Update Agent into registration mode, such as to re-register an
existing system, you may do so by issuing the following command at a shell prompt:
up2date --register
Important
If your username is part of a larger organizational account, you should take caution
when registering systems. By default, all systems registered with the Red Hat
Update Agent end up in the Ungrouped section of systems visible only to Satellite
Administrators. To ensure you retain management of these systems, Red Hat
recommends that your organization create an activation key associated with a
specific system group and grant you permissions to that group. You may then register
your systems using that activation key and find those System Profiles within RHN
immediately. Refer to
After installing the Red Hat GPG Key, the screen shown in
appears each time you start the Red Hat Update Agent. Click Forward to continue.
10
Section 2.5, "Registering with Activation Keys"
Figure 2.3, "Welcome Screen"
for instructions.
appears. It