Buffalo TS1400D Quick Setup Manual

Installation
1) Connect the TeraStation's Ethernet and power cables and turn it on.
Computer
2) Launch TeraNavigator from the software CD in
your TeraStation package. Or, download and run
the TeraNavigator software from
http://d.buffalo.jp/TS1400D/.
4) Open NAS Navigator2. Right-click on the TeraStation's icon in NAS Navigator2 and select Properties. Set
the TeraStation's IP address. Then, log in to Settings (as described below) and set the TeraStation's
clock.
For more information, refer to the TeraStation's user manual, available from the link in TeraNavigator or
from http://d.buffalo.jp/TS1400D/. Your computer must be connected to the Internet to access or
download the user manual.
Opening Settings (for more options)
1) After installing NAS Navigator2, your PC will have a NAS Navigator icon on the desktop. On a Mac, it will
appear in the Dock.
2) Double-click the icon to open NAS Navigator2, the TeraStation's client utility. Right-click on the
TeraStation's icon in NAS Navigator2 and select Settings. Settings will open.
3) Enter the administrator username and password, then click OK to log in to Settings. We recommend
that you change the administrator password. Until it is changed, the default username is "admin" and
the password is "password".
TS1400D Quick Setup Guide
Thank you for purchasing Buffalo TeraStation.
Ethernet Cable
TeraNavigator
LAN Port
Insert the Ethernet cable until it clicks.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
3) Click NAS Navigator2 Install. The wizard will
guide you through installing NAS Navigator2.
http://d.buffalo.jp/TS1400D/
NovaBACKUP
Power Connector
Power Cable
2015.09