Page 2
To determine if realignment is hold the unit with the blades facing DOWN and squeeze On PPL clippers with an indicator light, the light will not turn off or change color after MIXED WITH KEROSENE OR ANY SOLVENT.
Page 3
4) Extreme right-hand tooth of top blade must be touching the big tooth on the bottom blade. If blade alignment is incorrect, add a few drops of Wahl Clipper Oil to the blades, turn clipper “ON” for a few moments, turn “OFF” and unplug. Loosen screws slightly and adjust. Tighten screws after blades are aligned.
Page 4
PPL Only: Not all PPL clippers include a charge indicator light. On PPL clippers with an indicator light, the light will not turn off or change color after clipper is fully charged. The power indicator light illuminates to reflect when the charger is properly connected to the clipper and plugged in.
Page 5
CLIPPER DISPOSAL AND RECYCLING: • For battery replacement send the entire, intact clipper unit to: Wahl Annex 3001, North Locust, P.O. Box 578, Sterling, IL 61081 • Do not attempt to remove the battery. Lithium-Ion batteries can explode, catch fire, and/or cause burns if disassembled, damaged, or exposed to water or high temperatures.
Page 6
EASY-TO-USE ATTA EASY-TO-USE ATTACHMENT GUARDS ATTACHMENT GUARDS: SPECIALTY ATTACHMENT GUARDS: ATTACHMENT GUARDS: Not all kits include the guards shown below Not all kits include the guards shown below Not all kits include the guards shown below Attachment guards help you cut hair to a desired length by keeping the blades at set distance from the skin, helping ensure an even hair length after cutting hair with a guard attached to the Attachment guards help you cut hair to a desired length by keeping the blades at set distance clipper.
Page 7
SPECIALTY ATTACHMENT GUARDS: Not all kits include the guards shown below The cutting length of the ear taper guards ranges from 3/16” (#1-1/2”) to 1/4” (#4). Standard Elite EAR TAPER GUARDS: Attach the “R” RIGHT attachment guard to the Remove the “R” RIGHT attachment guard and clipper as directed above.
Page 8
TIPS & TECHNIQUES When you cut your hair, you should visualize the head as if it were divided into four sections. Image below shows the different sections. Using proper techniques when moving from one section to the next will help you blend the sections together for professional looking results.
Page 9
STEP-BY-STEP GUIDE FOR CUTTING HAIR 2. Start at hairline on side of head 1. Comb hair and remove tangles. 3. Continue around head repeating step 2. 4. You are now ready to cut and cut up to middle of head. Note: Add the largest attachment guard to the middle portion of the hair.
Page 10
BLENDING When you want to blend from one section to the next, you will need to practice moving the clipper in an upward rocking motion. This motion will leave the hair slightly longer where the clipper pulls away from the scalp, enabling you to blend between the sections and achieve a smooth transition from one length of hair to the next.
Page 11
Valid in U.S.A. Only. If your Wahl product fails to operate satisfactorily within five (5) years from the date of original purchase or receipt as a gift, Wahl will, at our option, repair or replace the product and return it to you FREE OF CHARGE.
Need help?
Do you have a question about the PPL and is the answer not in the manual?
Questions and answers