Netscape MANAGEMENT SYSTEM 6.0 - PLUG-IN Manual page 301

Description of parameters defined in the file module (Continued)
Table 8-2
Parameter
enabled
level
fileName
bufferSize
flushInterval
Description
Specifies whether the listener is enabled to log messages.
• Check the box if you want the server to log messages of the type specified
in the type field.
• Leave the box unchecked if you do not want the server to log messages of
this type.
Specifies a message category that represents the level of logging to filter
messages. Log levels are additive. Before selecting a level, be sure to read
"Log Levels (Message Categories)" in Chapter 23, "Managing CMS Logs" of
CMS Installation and Setup Guide.
Permissible values: Debug, Information, Warning, Failure,
Misconfiguration, Catastrophe, and Security. By default, the level is
set to Information.
Example: Debug
Specifies the file path for the active log file; when the file is rotated, its name
will be appended with a timestamp
Rotation" in Chapter 23, "Managing CMS Logs" of CMS Installation and Setup
Guide.
Permissible values: Absolute path to the file, including the filename.
Example: /usr/netscape/servers/cert-demoCA/logs/audit.log
Specifies the buffer size, in kilobytes (KB), for the active log file. For details,
see "Buffered Versus Unbuffered Logging" in Chapter 23, "Managing CMS
Logs" of CMS Installation and Setup Guide.
Permissible values: As applicable. The default value is 512.
Example: 512
Specifies the flush interval, in seconds, for the active log file; when the file
reaches the specified interval, the buffer will be flushed to the file. For details,
see "Timing of Log File Rotation" in Chapter 23, "Managing CMS Logs" of
CMS Installation and Setup Guide
Permissible values: As applicable. The default value is 5.
Example: 5
.
For details, see "Timing of Log File
Chapter 8 Log Plug-in Modules
file Plug-in Module
301