Table of Contents
Advertisement
LdapSimpleMap Plug-in Module
By default, the Certificate Manager uses mapper rules that are based on the simple
mapper. During installation, the Certificate Manager automatically creates an
instance (called a mapper) of the simple mapper module. The mapper is named
LdapUserCertMap
map various types of end-entity certificates the server will issue to their
corresponding directory entries. For details, see "LdapUserCertMap Mapper" on
page 263.
It is important that you review and customize this mapper. For instructions on
modifying mappers or creating new mappers, section "Configuring a Certificate
Manager to Publish Certificates and CRLs" in Chapter 19, "Setting Up LDAP
Publishing" of CMS Installation and Setup Guide.
Configuration Parameters of LdapSimpleMap
In the CMS configuration file, the
ca.publish.mapper.impl.LdapSimpleMap.class=com.netscape.cms.
publish.LdapSimpleMap
In the CMS window, the module is identified as
how configurable parameters for the module are displayed in the CMS window.
Figure 5-6
262
Netscape Certificate Management System Plug-Ins Guide • March 2002
(see Figure 5-2 on page 251). You can use the default mapper to
LdapSimpleMap
.
Parameters defined in the LdapSimpleMap module
module is identified as
. Figure 5-6 shows
LdapSimpleMap
Advertisement
Table of Contents
