Netscape MANAGEMENT SYSTEM 6.0 - PLUG-IN Manual page 204

Table of Contents

Advertisement

NameConstraintsExt Plug-in Module
Table 4-16 Description of parameters defined in the NameConstraintsExt module (Continued)
Parameter
permittedSubtrees<n>.
min
204
Netscape Certificate Management System Plug-Ins Guide • March 2002
Description
• If you selected iPAddress, the value must be a valid IP address (IPv4
or IPv6) specified in the dot-separated numeric component notation.
The syntax for specifying the IP address is as follows:
For IP version 4 (IPv4), the address should be in the form specified in
RFC 791 (http://www.ietf.org/rfc/rfc0791.txt). IPv4
address must be in the n.n.n.n format; for example, 128.21.39.40.
IPv4 address with netmask must be in the n.n.n.n,m.m.m.m format.
For example, 128.21.39.40,255.255.255.00.
For IP version 6 (IPv6), the address should be in the form described in
RFC 1884 (http://www.ietf.org/rfc/rfc1884.txt), with
netmask separated by a comma. Examples of IPv6 addresses with no
netmask are 0:0:0:0:0:0:13.1.68.3 and FF01::43. Examples of
IPv6 addresses with netmask are 0:0:0:0:0:0:13.1.68.3,FFFF:
FFFF:FFFF:FFFF:FFFF:FFFF:255.255.255.0 and
FF01::43,FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FF00:0000.
• If you selected OID, the value must be a unique, valid OID specified in
dot-separated numeric component notation. Although you can invent
your own OIDs for the purposes of evaluating and testing this server,
in a production environment, you should comply with the ISO rules for
defining OIDs and for registering subtrees of IDs. See
"Object Identifiers"
example, 1.2.3.4.55.6.5.99.
• If you selected otherName, the value must be the absolute path to the
file that contains the base-64 encoded string of the subtree. For
example, /usr/netscape/servers/ext/nc/othername.txt.
Specifies the minimum number of permitted subtrees.
Permissible values: -1, 0, or n.
• -1 specifies that the field should not be set in the extension.
• 0 specifies that the minimum number of subtrees is zero (default).
• n must be an integer that is greater than zero. It specifies at the most n
subtrees are allowed.
Example: 0
for information on allocating private OIDs. For
Appendix B,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Certificate management system 6.0

Table of Contents