Ldapusercertpublisher Publisher; Ldapcrlpublisher Plug-In Module - Netscape MANAGEMENT SYSTEM 6.0 - PLUG-IN Manual

Table 6-3 Description of parameters defined in the LdapUserCertPublisher module
Parameter Description
Specifies the directory attribute of the mapped entry to which the Certificate
certAttr
Manager should publish the certificate.
Permissible values: Must be userCertificate;binary.
Example: userCertificate;binary

LdapUserCertPublisher Publisher

The publisher named
LdapUserCertPublisher
this publisher during installation.
You can use this publisher to publish an end-entity certificate to the
userCertificate;binary
directory.

LdapCrlPublisher Plug-in Module

The
LdapCrlPublisher
module enables you to configure a Certificate Manager to publish or unpublish the
CRL to the
directory entry; the configured mapper must locate the CA's entry so that the
publisher can publish the CRL to the
attribute. The CRL is published as a DER-encoded binary blob.
The CRL publisher requires you to specify just one parameter named
value of this parameter must be
During installation, the Certificate Manager automatically creates an instance
(called a publisher) of the
directory. See "LdapCrlPublisher Publisher" on page 277.
LdapUserCertPublisher
module. The Certificate Manager automatically creates
attribute of the mapped end-entity's entry in the
plug-in module implements the CRL publisher. This
certificateRevocationList;binary
LdapCrlPublisher
is an instance of the
attribute of the mapped
certificateRevocationList;binary
certificateRevocationList;binary
module for publishing CRLs to the
Chapter 6
LdapCrlPublisher Plug-in Module
. The
crlAttr
.
Publisher Plug-in Modules 275