Netscape MANAGEMENT SYSTEM 4.5 - PLUG-IN Manual page 69

Figure 2-2
Table 2-2 gives details about each of these parameters.
Description of parameters defined in the RenewalNotificationJob module
Table 2-2
Parameter
enabled
cron
Parameters defined in the RenewalNotificationJob module
Description
Specifies whether the job is enabled or disabled. Check the box to enable the
job. Uncheck the box to disable the job. If you enable the job and set the
remaining parameters correctly, the server runs the job at scheduled intervals.
Specifies the cron specification for when this job should be run. In other
words, it specifies the time at which the Job Scheduler daemon thread should
check the certificates for sending renewal notifications.
Permissible values: Must follow the convention specified in "Schedule for
Executing Jobs" on page 78.
Example: 03**1-5
RenewalNotificationJob Plug-in Module
Chapter 2 Job Plug-in Modules 69