Configuration Parameters Of Ocspnocheckext - Netscape MANAGEMENT SYSTEM 4.5 - PLUG-IN Manual

OCSPNoCheckExt Plug-in Module
During installation, Certificate Management System automatically creates an
instance of the OCSP no check extension policy. See "OCSPNoCheckExt Rule" on
page 221.

Configuration Parameters of OCSPNoCheckExt

In the CMS configuration file, the
<subsystem>.Policy.impl.OCSPNoCheckExt.class=com.netscape.
certsrv.policy.OCSPNoCheckExt
identifying the subsystem).
In the CMS window, the module is identified as
shows how the configurable parameters for the module are displayed in the CMS
window.
Figure 4-22
The configuration shown in Figure 4-22 creates a policy rule named
OCSPNoCheckExtForResponderCert
set the OCSP no check extension in OCSP responder certificates only.
Table 4-21 provides details for each of these parameters.
220 Netscape Certificate Management System Plug-ins Guide • October 2001
OCSPNoCheckExt
Parameters defined in the OCSPNoCheckExt module
module is identified as
, where
<subsystem>
OCSPNoCheckExt
, which enforces a rule that the server should
is or (prefix
ca ra
. Figure 4-22