Netscape MANAGEMENT SYSTEM 4.5 - PLUG-IN Manual page 255

Figure 5-3
Table 5-2 describes these parameters.
Table 5-2 Description of parameters defined in the LdapCaSimpleMap module
Parameter Description
Specifies whether the Certificate Manager should create an entry for the CA in the
createCAEntry
publishing directory. Check the box if you want the server to create a CA's entry
(default). Uncheck the box if you don't want the server to create an entry.
If you check the box, the Certificate Manager first attempts to create an entry for the
CA in the directory. If the Certificate Manager succeeds in creating the entry, it then
attempts to publish the CA's certificate to the entry. Note that the CA's entry DN in
the directory will match the pattern you specify in the dnPattern field. For
example, if the issuer DN (specified in the CA's signing certificate) is CN=testCA,
OU=Research Dept, O=Siroe Corporation, C=US, and the dnPattern is set
to CN=$subj.cn,OU=$subj.ou,O=$subj.o,C=US, the Certificate Manager
creates an entry with CN=testCA, OU=Research Dept, O=Siroe
Corporation, C=US as its DN.
Parameters defined in the LdapCaSimpleMap module
LdapCaSimpleMap Plug-in Module
Chapter 5 Mapper Plug-in Modules 255