Netscape MANAGEMENT SYSTEM 4.5 - PLUG-IN Manual page 35

Description of parameters defined in the UidPwdPinDirAuth module (Continued)
Table 1-3
Parameter
ldap.ldapconn.
secureConn
ldap.ldapconn.
version
ldap.ldapauth.bindDN
password
Description
Specifies the type—SSL or non-SSL—of the port at which the authentication
directory listens to requests from Certificate Management System.
• Check the box if the port is an SSL (HTTPS) port. If your authentication
directory is configured for SSL-enabled communication (with or without
SSL client authentication), choose this option.
• Leave the box unchecked if the port is a non-SSL (HTTP) port. If your
authentication directory is configured for basic authentication, choose this
option (default).
Specifies the LDAP protocol version.
Permissible values: 2 or 3.
• 2 specifies LDAP version 2. If your authentication directory is based on
Netscape Directory Server 1.x, choose 2.
• 3 specifies LDAP version 3. For Directory Server versions 3.x and later,
choose 3 (default).
Example: 3
Specifies the user entry to bind as when removing PINs from the
authentication directory. You need to specify this parameter only if you've
selected removePin. It is recommended that you create and use a separate
user entry that has permission to modify only the PIN attribute in the
directory. For example, don't use the directory manager's entry as it has
privileges to modify the entire directory content.
Permissible values: A valid bind DN.
Example: CN=pinmanager
Specifies the password associated with the DN specified by the
ldap.ldapauthbindDN parameter. when you save your changes, the
server stores the password in the single sign-on password cache and uses it
for subsequent start ups (see section "Required Start-up Information" in
Chapter 8, "Starting and Stopping CMS Instances" of CMS Installation and
Setup Guide.)
You need to specify this parameter only if you've selected removePin.
UidPwdPinDirAuth Plug-in Module
Chapter 1 Authentication Plug-in Modules 35