Selecting A Server Certificate For A Connection Group - Netscape ENTREPRISE SERVER 6.1 - 04-2002 ADMINISTRATOR Administrator's Manual

Access either the Administration Server or the Server Manager and choose the
1.
Security tab.
For the Server Manager you must first select the server instance from the
drop-down list.
Select the Preferences tab, if not already displayed.
2.
Choose the Edit Listen Sockets link.
3.
The Listen Sockets Table page is displayed.
Use the drop-down Action list to select Edit, if not already displayed, for the
4.
connection group you want to secure.
Use the drop-down list in the Security column to turn security on for the
5.
connection group.
Click OK.
6.
The Attributes link will now be displayed in the Security column.
For the Server Manager, click Apply, and then Restart for changes to take
7.
effect.

Selecting a Server Certificate for a Connection Group

You can configure connection groups in either the Administration Server or the
Server Manager to use server certificates you have requested and installed.
NOTE You must have at least one certificate installed.
To select a server certificate for your connection group to use, perform the
following steps:
Access either the Administration Server or the Server Manager and choose the
1.
Preferences tab.
For the Server Manager you must first select the server instance from the
drop-down list.
Click the Edit Listen Sockets link.
2.
The Listen Socket Table page appears.
Use the drop-down Action list to select Edit, if not already displayed, for the
3.
connection group you are selecting a certificate for.
Use the drop-down list to turn Security on for that connection group, if it is off.
4.
Setting Security Preferences
Chapter 5 Securing Your Enterprise Server 111