Netscape DIRECTORY SERVER 6.2 - ADMINISTRATOR Administrator's Manual page 318

Configuring Multi-Master Replication
•
nsds5ReplicaBusyWaitTime
Amount of time in seconds a supplier should wait after a consumer sends back
a busy response before making another attempt to acquire access. The default
is 3 seconds.
•
nsds5ReplicaSessionPauseTime
Amount of time in seconds a supplier should wait between update sessions.
Set this interval so that it is at least 1 second longer than the interval specified
for
reach an acceptable distribution of consumer access among the suppliers. The
default is 0.
These two attributes may be present in the
class, which is used to describe replication agreements. You can set the attributes at
any time by using
takes effect for the next update session if one is already in progress.
NOTE
The two attributes are designed so that the
interval will always be at least 1 second longer than the interval specified for
nsds5ReplicaBusyWaitTime
chance to gain consumer access before the previous supplier can re-access the
consumer.
• If either attribute is specified but not both,
set automatically to 1 second more than
• If both attributes are specified, but
than or equal to
nsds5ReplicaSessionPauseTime
nsds5ReplicaBusyWaitTime
If Directory Server has to automatically reset the value of
nsds5ReplicaSessionPauseTime
change is not visible to clients, and it not saved to the configuration file. From an
external viewpoint, the attribute value appears as originally set.
318 Netscape Directory Server Administrator's Guide • December 2003
nsds5ReplicaBusyWaitTime
changetype:modify
If you set either attribute to a negative value, Directory Server
sends the client a message and an
error code.
nsds5ReplicaBusyWaitTime
. Increase the interval as needed until you
nsds5ReplicationAgreement
with the
replace
LDAP_UNWILLING_TO_PERFORM
nsds5ReplicaSessionPauseTime
. The longer interval gives waiting suppliers a better
nsds5ReplicaSessionPauseTime
nsds5ReplicaBusyWaitTime
nsds5ReplicaSessionPauseTime
,
is set automatically to 1 second more than
.
, the value is changed internally only. The
object
operation. The change
.
is less
is