Before using this product, please read these instructions carefully. You will also need to consult the camera manual. • This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount. • Update to the latest version of the camera fi rmware before using this lens with the Z 7, Z 6, or Z 50, as otherwise the camera may fail to correctly recognize the lens and features such as vibration reduction may be unavailable.
Using the Lens Using the Lens Parts of the Lens: Names and Functions Parts of the Lens: Names and Functions Refer to the diagram on the left edge of this sheet. Lens hood mounting Use when attaching the lens hood. mark Zoom ring Rotate to zoom in or out.
• Keep the CPU contacts clean. • Should the rubber lens-mount gasket be damaged, cease use immediately and take the lens to a Nikon-authorized service center for repair. • Replace the lens caps when the lens is not in use.
Approx. 76.5 mm/3.1 in. maximum diameter × 114 mm/4.5 in. (distance from camera lens mount fl ange) Weight Weight Approx. 570 g (1 lb 4.2 oz) Nikon reserves the right to change the appearance, specifi cations, and performance of this product at any time and without prior notice.
Page 7
Nikon Europe B.V. will, without charge for labor and parts, repair the product in the terms and conditions set as below.
Need help?
Do you have a question about the NIKKOR Z 24-200mm f/4-6.3 VR and is the answer not in the manual?
Questions and answers