Page 1
DUAL POWER ™ MAX PET CARPET CLEANER USER MANUAL Please visit Hoover.com for video instructions and FAQ’s for this Carpet Cleaner. IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE. This product is intended for Household use only. If used Commercially warranty is VOID.
To avoid injury or damage, keep children away from product, and do not allow children to place fingers or other objects into any openings. • Use only as described in this user’s manual. Use only HOOVER® recommended attachments. • Do not use product with damaged cord or plug. If product is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call customer service at 1-800-944-9200 prior to continuing use.
Lift up to remove the Clean Water Tank, then remove the cap and add warm water to the fill line. Add 3oz. of Hoover Solution. Secure cap. CLEANING FLUID SEE THE HOOVER’S SOLUTION GUIDE insert or visit Hoover.com/cleaning-solutions.
Page 4
HOW TO CLEAN CARPETS Step on the Handle Release Pedal to recline the cleaner for cleaning position. Step on the Power Pedal to turn ON. IMPORTANT: Empty Dirty Water Tank when you hear an audible change. Squeeze trigger for a slow forward and backward wet stroke.
Page 5
CAUTION: Not to be used for grooming a pet. CAUTION: DO NOT USE THIS EXTRACTOR ON HARD FLOORS. USING THIS PRODUCT ON HARD FLOORS MAY SCRATCH OR DAMAGE YOUR FLOOR. HOW TO CLEAN THE DIRTY WATER TANK WARNING: Risk of personal injury – Brush roll may suddenly restart –...
Unlatch the lid to remove the top. Remove the filter basket and clear any debris. Empty the tank, rinse, and allow to air dry. AUTO SHUT OFF FLOAT: Your carpet cleaner is equipped with a shut off float within your Dirty Water Tank.
Page 7
HOW TO REMOVE & CLEAN THE BRUSH ROLL (CONT’D) Lay the product down to access the underside. Use a Philips screwdriver to remove 6 screws. Arrows show location of screws on the under- side of your cleaner. Remove underside belt cover and the brush roll end cap.
REMOVING THE BELT To remove belt, unscrew foot side cover from underside (3 screws). Flip cleaner upright and remove upper belt cover from foot. Slide belt off shaft and remove. If replacing belt, install the new belt.
REPLACING THE BRUSH ROLL Slip brush roll through belt. Make sure belt is centered on pulley when replacing. With belt in place, pull and slide brush roll into unit, making sure that the brush roll end caps are in correct orientation. Replace belt cover and secure by replacing all 6 screws.
AVAILABLE REPLACEMENT PARTS AND ACCESSORIES SUCH AS SOLUTIONS AT HOOVER.COM. IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED, DAMAGED, LEFT OUTDOORS, OR DROPPED INTO WATER, CALL CUSTOMER SERVICE AT 1-800-944-9200 PRIOR TO CONTINUING USE.
NATURE TO OWNER OR ANY PARTY CLAIMING THROUGH OWNER, WHETHER BASED IN CONTRACT, NEGLIGENCE, other objects into any openings. • Use only as described in this user’s manual. Use only HOOVER® recommended modified, or repairs made necessary by normal wear or the use of other products, parts, or accessories which attachments.
Need help?
Do you have a question about the DUAL POWER MAX PET and is the answer not in the manual?
Questions and answers