Page 1
MARINE DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA AUDIO MARIN RECEPTOR DE MEDIOS DIGITALES MARINO MVH-MS310BT Quick start guide Guide de démarrage rapide Guía de inicio rápido Important (Serial number) The serial number is located on the bottom of this unit. Be sure to record this number on the enclosed warranty card before the unit is installed.
Page 2
(DEMO OFF). Before You Start Thank you for purchasing this PIONEER product To ensure proper use, please read through this guide and the Operation Manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this guide. Please keep the guide in a safe and accessible place for future reference.
Page 3
FEDERAL COMMUNICATIONS COMMISSION SUPPLIER’S DECLARATION OF CONFORMITY Product Name: MARINE DIGITAL MEDIA RECEIVER Model Number: MVH-MS310BT Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 2050 W. 190TH STREET, SUITE 100 TORRANCE, CA 90504, U.S.A. Phone: 1-800-421-1404 URL: http://www.pioneerelectronics.com The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through...
Page 4
You may contact Pioneer directly as follows: Do not ship your unit in for repair without contacting Pioneer first. Units sent without a return authorization number will be refused.
Page 5
− Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. − Place all cables away from moving parts, such as the shift lever and seat rails. −...
Rear output or subwoofer output Front output Antenna input Fuse (10 A) Wired remote input Pioneer marine wired remote control (CD-ME300) can only be connected (sold separately). Power cord Perform these connections when not connecting a rear speaker lead to a subwoofer.
Page 7
Perform these connections when using a subwoofer without the optional amplifier. Important In the above case, two 4 Ω subwoofers wired in parallel will represent a 2 Ω load. To power cord input Left Right Front speaker Rear speaker White White/black Gray Gray/black...
Power amp (sold separately) Perform these connections when using an optional amplifier. System remote control Connect to blue/white cable. Power amp (sold separately) Connect with RCA cables (sold separately) To front output Front speaker To rear output or subwoofer output Rear speaker or subwoofer Installation CAUTION...
Page 9
• Do not use unauthorized parts as this may cause malfunctions. • Do not install this unit where: − it may interfere with operation of the boat. − it may cause injury to a passenger as a result of a sudden stop. •...
Page 10
When not using the supplied mounting sleeve Line up the holes on the mounting bracket with the holes on the sides of the unit to attach the bracket. Screw in one screw on each side to hold the unit in place. Tapping screw (5 mm ×...
To secure the front panel The front panel can be secured with the supplied screw. Screw Installing the microphone The microphone should be placed directly in front of the boat operator at a suitable distance to pick up their voice clearly. CAUTION Carefully select the mounting location to avoid internal damage by water entering the microphone.
Page 12
Install the microphone as follows. Double-sided tape Clamp (sold separately)
Basic operation MVH-MS310BT (navigation)/LIST USB port M.C. (multi-control) dial SRC (source)/OFF DISP (display) Detach button BASS Display window AUX input jack (3.5 mm stereo jack) BAND/...
Page 14
About the main menu You can adjust various settings in the main menu. Press the M.C. dial to display the main menu. Turn the M.C. dial to select one of the categories below, then press to confirm. • FUNCTION settings •...
Setup operation When you turn the ignition switch to ON after installation, the setup menu appears in the display. Turn the M.C. dial to select [LANGUAGE], then press to confirm. [ENG] [ESP] [FRA] Turn the M.C. dial to select [CLOCK SET], then press to confirm. Turn the M.C.
Tuner operation Receiving preset stations Press SRC/OFF to select [RADIO]. Press BAND/ to select the band. [FM1] [FM2] [FM3] [AM] Press a number button (1/ to 6/ ). Best stations memory (BSM) After selecting the band, press the M.C. dial to display the main menu.
MTP connection A device installed with Android OS 4.0 or most later versions can be connected to the unit via MTP using the cable supplied with the device. However, depending on the connected device, OS version or the number of files in the device, audio files/songs may not be able to be played back via MTP.
Press and hold and then talk into the microphone to input voice commands. To exit voice recognition mode, press BAND/ Making a connection with Pioneer Smart Sync Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together.
Page 19
− For devices other than a USB-connected Android device, press SRC/OFF to select any source and press and hold the M.C. dial. − For iPhone, launch Pioneer Smart Sync on the mobile device. Listening to Pandora® (Not available when [USB MTP] is set to [ON] in the SYSTEM settings.) Update the Pandora application to the latest version before use.
Turn the M.C. dial to select one of the below. • Select [WIRED] for the USB connection. • Select [BLUETOOTH] for the Bluetooth connection. Press SRC/OFF to select [PANDORA]. Launch the Pandora application on the mobile device and start playback. Listening to Spotify®...
Need help?
Do you have a question about the MVH-MS310BT and is the answer not in the manual?
Questions and answers