Download
Share
Print this page
ZyXEL Communications NWA1123-AC HD Quick Start Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Wireless Access Point
  5. NWA1123-AC HD
  6. Quick start manual
ZyXEL Communications NWA1123-AC HD Quick Start Manual

ZyXEL Communications NWA1123-AC HD Quick Start Manual

Hide thumbs Also See for NWA1123-AC HD:

Advertisement

Quick Links

Download this manual
NWA1123-AC HD
802.11ac Dual-Radio Dual-Mount
PoE Access Point
Quick Start Guide
ENGLISH | DEUTSCH | ESPAÑOL | FRANÇAIS

Advertisement

loading
Need help?

Need help?

Do you have a question about the NWA1123-AC HD and is the answer not in the manual?

Questions and answers

Related Manuals for ZyXEL Communications NWA1123-AC HD

Summary of Contents for ZyXEL Communications NWA1123-AC HD

  • Page 1 NWA1123-AC HD 802.11ac Dual-Radio Dual-Mount PoE Access Point Quick Start Guide ENGLISH | DEUTSCH | ESPAÑOL | FRANÇAIS...

  • Page 2: Hardware Installation Hardware Installation

    Hardware Installation Hardware Installation Hardware Installation Hardware Installation Wait until the LED steady bright green Wait until the LED steady bright green PoE Injector PoE Injector PoE Switch PoE Switch Router Power Outlet Router Power Outlet Connect the UPLINK/PoE port to a router network. If you are not using PoE, connect the power socket to an appropriate power source.

  • Page 3: Cloud Management

    .com Email Password Submit Follow the steps below to manage the NWA1123-AC HD through the Zyxel cloud-based network management system. Note: Make sure the connected router has Internet access. Go to the Zyxel Nebula Control Center (NCC) website (https://nebula.zyxel.com). Click Login and you will be redirected to the...
  • Page 4 Code Create an organization and a site (network) in the NCC. Enter the NWA1123-AC HD's LAN MAC address and serial number (S/N) Create an organization and a site (network) in the NCC. (see the label on the device) in the NCC configuration screen.
  • Page 5 Create an organization and site or select an existing site. Scan the myZyxel account. NWA1123-AC HD's QR code to add it to the site. (You can find the QR code Create an organization and site or select an existing site. Scan the in its web configurator dashboard or on a label on the device or its box...
  • Page 6 Login (default) Login If you don't want to manage the NWA1123-AC HD through the Zyxel NCC, follow the steps below to configure the NWA1123-AC HD (in standalone If you don't want to manage the NWA1123-AC HD through the Zyxel NCC, mode).
  • Page 7 Use an Ethernet cable to connect your computer to the LAN1 port of "http://192.168.1.2" to access the web configurator. Make sure your the NWA1123-AC HD. computer IP address is in the same subnet as the NWA1123-AC HD's. Use its DHCP-assigned IP or default static IP address...
  • Page 8 Check the Dashboard screen and note down the NWA1123-AC Note: The 1.1.1.1 is for initial setup only. It is not usable after the NWA1123-AC HD is HD's IP address in case you need to access it's web configurator again.
  • Page 9 After the bracket is attached to the wall/ceiling, line up the UPLINK/POE Push the NWA1123-AC HD in and turn it to the right until it clicks into port on the NWA1123-AC HD with the tab of the mounting bracket (B).
  • Page 10 How to release the AP How to release the AP Insert a thin flat tool (such as a flat screwdriver) to push down the AP lock. Turn the AP in a counterclockwise direction to release.

  • Page 11: Support Information

    EU Importer Zyxel Communications A/S Gladsaxevej 378, 2. th. 2860 Søborg, Denmark https://www.zyxel.com/dk/da/ US Importer Zyxel Communications, Inc 1130 North Miller Street Anaheim, CA 92806-2001 https://www.zyxel.com/us/en/ Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.