Nsslapd-Plug-In; Nsslapd-Port (Port Number); Nsslapd-Privatenamespaces - Netscape DIRECTORY SERVER 6.0 Configuration Manual

Entry DN
cn=config
0 to the maximum 32 bit integer value (2147483647)
Valid range
Default value 300000
Syntax DirectoryString
Example
nsslapd-outbound-ldap-io-timeout:

nsslapd-plug-in

This read-only attribute lists the syntaxes and matching rules loaded by the server.

nsslapd-port (Port Number)

TCP/IP port number used for LDAP communications. If you want to run SSL/TLS
over this port you can do so by through the Start TLS extended operation. This
selected port must be unique on the host system; make sure no other application is
attempting to use the same port number. On UNIX systems, specifying a port
number of less than 1024 requires the Directory Server to run as root.
If you are changing the port number for a configuration directory, you must also
update the corresponding Server Instance Entry in the configuration directory.
Please note that you need to restart the server for the port number change to be
taken into account.
Entry DN
cn=config
1 to 65535
Valid Range
Default Value
389
Integer
Syntax
Example
nsslapd-port: 389

nsslapd-privatenamespaces

Contains the list of the private naming contexts
cn=monitor.
Entry DN
cn=config
cn=config, cn=schema and cn=monitor
Valid Range
Core Server Configuration Attributes Reference
300000
,
cn=config cn=schema
Chapter 2 Core Server Configuration Reference
and
61