Advertisement
Advertisement
Table of Contents
Related Manuals for CONDTROL X1
Summary of Contents for CONDTROL X1
- Page 1 CONDTROL X1 LASER DISTANCE METER user manual OPERATION 1 Belt holder 2 LCD Display 3 ON/ Measuring button 4 Plus ( + ) /minus ( - ) button 5 Area/volume/wall area button 6 Indirect measurement button 7 Reference button/ Unit of measurement...
- Page 2 CONDTROL X1 LASER DISTANCE METER user manual Display «+» or « -» symbol Minimal measurement Single / continuous measurement Area/ volume/Indirect measurementt Main line Battery status Laser active Measuring reference Measuring units...
-
Page 3: Technical Data
0 °С ...+40 °С ( +32 °F ... +104 °F) Dimensions 110 mm х 43 mm х 26 mm (4.33 in x1.69 in x 1.02 in) Weight 70 g * Use a target plate to increase the measurement range during daylight or if... - Page 4 CONDTROL X1 LASER DISTANCE METER user manual MENU FUNCTIONS SETTING 1 Unit Setting The following unit can be set: Distance Area Volume 0.000 m 0.000 m 0.000 m 0’00’’1/16 0.000 ft 0.000 ft 0000 1/16 in 0.000 ft 0.000 ft 0.000 ft...
- Page 5 CONDTROL X1 LASER DISTANCE METER user manual Press button for turn on the laser beam to aim at object which you want to measure. Result appears in lower (big) string. 1 Press Laser switched off. Laser switch on for targeting.
- Page 6 CONDTROL X1 LASER DISTANCE METER user manual Press any of buttons to stop continuous laser . Catch the final length display on the screen. Measuring time in continuous mode should be < 0.3sec to 90% Kodak grey card at distance <15m. Lighting condition <2000 LUX. Indoors.
- Page 7 CONDTROL X1 LASER DISTANCE METER user manual The last step is cancelled. 7 Area 1 Press button once symbol appears in the display. Press this button Measured result appears in upper string. to take the first length measurement (height) Measured result appears in upper string.
- Page 8 CONDTROL X1 LASER DISTANCE METER user manual 8 Volume symbol appears in the 1 Press button twice. display Measured result appears in Press this button to take the upper string first length measurement (height) Press this button to take Measured result appears in upper the second length measurement string.
- Page 9 CONDTROL X1 LASER DISTANCE METER user manual Press button once to cancel last step. To cancel this mode press twice. 9 Simple Pythagoras Use Pythagorean Theorem (a ) to measure height indirectly. 1 Press button once to symbol appears in the...
-
Page 10: Message Codes
CONDTROL X1 LASER DISTANCE METER user manual Press button once to cancel last step. To cancel this mode press twice. MESSAGE CODES The following errors can be corrected: Code Cause Renedy Distance is out of range Keep in correct measure range... -
Page 11: Measuring Conditions
Do not use aggressive cleaning agents or solutions. Handle the instrument as you would a telescope or camera. Warranty The Condtrol X1 comes with a one year warranty from CONDTROL Ltd. SAFETY INSTRUCTIONS The User Manual can be found in the first part of the booklet, forms a part of the Safety Instructions. - Page 12 CONDTROL X1 LASER DISTANCE METER user manual - CAUTION: Indicates a potentially hazardous situation or an unintended use which, if not avoided, may result in minor injury and/or in appreciable material, financial and environmental damage. ! Important paragraphs which must be adhered to in practice as they enabled the product to be used in a technically correct and efficient manner.
Need help?
Do you have a question about the X1 and is the answer not in the manual?
Questions and answers