Ameda Elite Quick Start Manual

GETTING STARTED
GETTING STARTED
1
1
Tubing
Tubing Adapter
• If sterile, use immediately (kit is
preassembled)
• If not sterile, clean and assemble
the kit (refer back page of this
Quick Card Guide).
5
• If sterile, use immediately (kit is
Breast Pump Quick S
• Turn CYCLES dial to right to MAX.
™
preassembled)
• If not sterile, clean and assemble
Cleaning the Ameda Elite Breast Pump
the kit (refer back page of this
For At-Home/End Users:
After each pumping, turn pump OFF.
Quick Card Guide).
Wipe with clean, damp cloth.
5
2
• Turn CYCLES dial to right to MAX. • Insert tubing adapter
into pump piston.
Elite
™
before beginning, wash hands
Adapter Cap
Silicone Diaphragm
Breast Flange
Valve
Bottle
Tubing
Tubing Adapter
Breast Pump Quick Start Guide
2
Silicone Diaphragm
• Insert tubing adapter
into pump piston.
6
• Once milk flows, turn CYCLES
dial to left to help drain milk.
• Try half-way, adjust as needed.
For Hospital/Rental Stations:
Turn pump OFF, Clean between useres, wearing disposable
gloves. Use only Ameda approved cleaners such as Metrex
CaviWipes or PDI Sani-Cloth AF3
Adapter Cap
Breast Flange
Valve
Bottle
befo
3
• Center flange on b
create seal.
• Refer to back pag
Card Guide for pr
7
• If milk flow slows,
let-down.
• Turn CYCLES to M
to slow speed whe
• Repeat as needed